PWS METC Linen Svcs 3.9.26.pdf

036PEFORMANCE WORK STATEMENT

FOR

METC LINEN SERVICES

24 February 2026

1. DESCRIPTION OF SERVICES / GENERAL INFORMATION. The contractor shall provide the facility, labor, supervision, supplies, equipment, and transportation necessary to provide non-personal full linen services at the Contractor’s facility as defined in this performance work statement (PWS) in support of the Medical Education and Training Campus (METC), Joint Base San Antonio (JBSA)-Fort Sam Houston, TX.

1.1. DESCRIPTION OF SERVICES. The contractor shall perform linen services to include the laundering of surgical towels, hand towels, scrub tops, scrub bottoms, lab coats, sheets, pillow cases, blankets, patient gowns and any other incidentals that may need service. The soiled linen shall be picked up, washed, cleaned, folded, hung and returned to the same location the following week.

1.1.1. Pick up and deliver linen weekly between the hours of 8:00am and 11:00am (CST). One week turn-around in linen services is required. The pick up/drop off locations are listed below and additional locations may be added as needed during the performance period. Delivery day and time may change according to mission requirements. Contractor personnel will not pick up or deliver to Government facilities any time the Government is unexpectedly required to close their offices. The Contractor will not be compensated for these Government closures. The Contractor is responsible for all notification of their contractor staff during times of closure.

# STREET

ADDRESS BUILDING ROOM NUMBERS FLOOR ELEVATOR

LOADING

DOCK

1 3038 William Hardee Road

895 R-2-135, R-2-207, R-2-208, R-2-210, R-2-211, R-2-306

1st, 2nd, 3rd

Yes Yes

2 3068 William Hardee Road

899 R-1-416 4th Yes Yes

3 3480 Garden Avenue

1356 R-3-162, R-3-315 1st, 3rd Yes Yes

4 3488 Garden Avenue

1364 R-4-227, R-4-315, R-4-402

2nd, 3rd, 4th

Yes Yes

5 3490 Forage Road

1394 236 1st N/A No

1.1.2. Linen shall be received, processed and returned by the contractor to the Government.

Clean linen shall be counted/annotated on the ticket at pick-up and delivery. The Government and contractor shall verify the numbers and countersign the delivery ticket to indicate agreement with the numbers of items picked up and delivered at the time. A copy of each completed linen delivery ticket shall be furnished to the contractor, and one maintained by the Government and will become the official clean delivery ticket.

2. GENERAL INFORMATION.

2.1. CONTRACTOR PERSONNEL. Provide a point of contact that shall be responsible for responding to the government. The name of the alternate shall act for the contractor when the primary is absent shall be designated in writing to the contracting officer no later than the start of the contract.

2.1.1. The point of contact and the alternate shall have full authority to act on behalf of the contractor on all contract matters relating to the daily operation of this contract.

2.1.2. The point of contact and alternate must be able to read, write, speak, and understand English well enough to satisfy all contract performance requirements.

2.1.3. The contract point of contact and alternate shall be available during normal duty hours within a reasonable time to meet on the installation with Government personnel designated by the contracting officer to discuss problem areas and find remedies.

3. STANDARDS OF QUALITY. Periodically, the following guides will be used by the Government to control the quality of a finished product. Failure to meet these standards will result in the product being returned for further cleaning.

3.1. The contractor shall have experience in handling and providing medical type linen services. The firm must have gained this experience as a result of being regularly engaged in the business of providing linen services in health care/patient care environments (e.g. inpatient and outpatient medical treatment facilities).

3.1.1. All soil, spots, and stains shall be removed, unless removal will change the color or damage the fabric.

3.1.2. Each item shall be hygienically cleaned, dried and free of lint, scorch marks, or other damage to the fabric.

3.1.3. White fabrics shall be white and free of odors and yellow or gray tints. And Colors shall be bright.

3.1.4. Items shall be clean, and be free of objectionable odors such as cleaning chemicals, mold, mildew, body bacteria, and other unclean elements.

3.1.5. No trace of wash supplies (e.g. soap, bleach, etc.) shall be left in the fabrics.

3.1.6. Shrinkage shall be no more than what may be termed as “natural” for the fabric in accordance with (IAW) best commercial practices. The contractor shall treat all articles in such a manner as to keep the dimensional changes of the article to a minimum and to avoid damages of any kind to the fabric.

3.1.7. Tumbled work such as linens, towels, and blankets shall be completely dry and soft.

3.1.8. Ironing and folding. Items processed on flatwork ironers (e.g. sheets, pillow cases) shall be machine finished (ironed) so that the surfaces are smooth and without “rough dry” spots, wrinkles or “tails”. Flatwork shall be free of creases when received by the customer, as applicable.

3.1.9. Pressing. Presswork shall be accomplished so that items meet best commercial standards, as applicable.

3.1.10. Finished work. The contractor shall assemble completed work into bundles and wrap the bundles for return to the locations IAW commercial practices (Refer to Section 1.1.1.).

3.1.11. The linen items must be returned sanitized and in sterile condition.

3.1.12. Soiled and cleaned linen shall be separated for transportation if in the same vehicle.

3.1.13. All property, to include monies, that are found in the linen shall be returned to the Government immediately.

4. UNSERVICEABLE ARTICLES. All Government owned items identified as unserviceable and/or non-repairable while in the possession of the contractor shall be returned in a separately marked bundle identified as “Unserviceable” after the items have been laundered.

These items shall be returned within one week of being identified as unserviceable. If it is determined that these items were caused by the contractor (e.g., laundry machine, wrong wash formulas, excessive drying, etc.), the contractor shall replace the items at no additional charge to the Government. Also, the Government will return all unserviceable and/or non-repairable items identified in a separately marked bundle to the contractor for corrective action or replacement at no additional charge to the Government.

5. PACKAGING AND TRANSPORTING.

5.1. General. Packaging is the means of preparing the finished products for delivery to the facilities. All finished products shall be packaged in such a manner that will prevent contamination or degradation in the cleanliness and quality of the product prior to its use at the buildings.

5.2. Laundered articles shall be (a) sorted by type, size and color, (b) folded and stacked

(c) wrapped and sealed in clear plastic, unless specified otherwise. The Government reserves the right to add, delete, or change the size of the bundles. Wrapping materials shall be clear plastic.

Plastic wrap shall be of sufficient strength to hold articles without bursting or tearing during normal handling.

5.3. Preservation While in Transit. Articles processed in bundles or bags shall be transported in clean carts, when possible. In all instances, the contractor shall transport and handle finished work so as to prevent wrinkling, damage, and contamination.

6. HOLIDAYS OBSERVED. Delivery and pickup of linen will not be required on the observed holidays.

• New Year’s Day: January 1st

• Martin Luther King’s Birthday: 3rd Monday in January

• President’s Day: 3rd Monday in February

• Memorial Day: Last Monday in May

• Juneteenth: June 19th

• Independence Day: July 4th

• Labor Day: 1st Monday in September

• Columbus Day: 2nd Monday in October

• Veterans Day: November 11th

• Thanksgiving Day: 4th Thursday in November

• Christmas: December 21st - 25th

7. SECURITY REQUIREMENTS. Contractor employees will be required to obtain and display identification badges. Anticipate delays in getting commercial vehicles on base and allow time for commercial vehicles to reach their destination by driving designated routes at posted speed limits throughout the base. Procedures for commercial vehicle access to the base are subject to change without prior notice. The contractor shall also obtain personnel and vehicle identification and passes as required for entry to the installation. The Government will provide all forms and procedures to the contractor to obtain personnel identification and vehicle passes as required. It is the contractor’s responsibility to renew passes/badges in a timely manner to ensure no interruption of service. During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site. Upon completion or termination of the contract or expiration of the identification passes, the contractor shall ensure that all base identification passes issued to contractor employees are returned to the issuing office. If a contractor employee has been terminated, the pass will need to be retrieved and returned to Security Forces (SF) so that employee does not have base access. If the pass is not retrieved, then SF will need to be notified so base access is not allowed. Failure to comply with these requirements may result in withholding of final payment.

7.1. All vehicles utilized for this service shall be properly state-registered and licensed prior to being operated on Government property. The contractor shall ensure that all operators of the contractor owned vehicles possess evidence of insurance and a valid state permit to operate their vehicles.

7.2. Unscheduled gate closures by the SF may occur at any time and personnel entering or leaving the installation may experience delays. Privately-owned vehicles of the contractors' personnel as well as contractor owned vehicles are subject to search while on Federal installations pursuant to current directives. Any violation of installation regulation or of state or federal stature may result in the termination of the privilege to enter one or more military installations.

8. SAFETY REQUIREMENTS. The Contractor shall maintain safety and health standards compliant with requirements of the Occupational Safety and Health Administration (OSHA) and federal, state and local safety laws and regulations.

9. APPENDIX.

ESTIMATED WORKLOAD DATA

APPENDIX

ESTIMATED WORKLOAD DATA

GENERAL. This chart is the anticipated annual workload based on historical workload data captured during the period 1 September 2021 through 31 January 2025. This projected workload is anticipated to remain at this level of support for the next five years with the exception that workload could fluctuate (plus or minus 5%) due to training program student throughput or force structure changes. However, these figures in no way guarantee that the Contractor will experience the same number of linen items during any period of this contract. Any request for equitable adjustment under the plus or minus variation in total quantity must be based on actual quantities exceeded estimated quantities by more than +/- 5 percent; the contractor must have suffered an increase in cost required to perform which was caused by the variation in excess of +/- 5%; and, the amount requested must be based on actuals and must be determined fair and reasonable by the Contracting Officer IAW FAR 31.201-3. The items listed in workload data will be included in the yearly linen service. These figures are based on estimation and may vary either higher or lower.

ITEM DESCRIPTION FINISHING CODES BUNDLE SIZE

ESTIMATED

ANNUAL

WORKLOAD

Surgical Towel W, F, B, SW 50 11,024

Hand Towel W, F, B, SW 10 2,236

Bath Towel W, F, B, SW 10 1,664

Scrub Top W, F, B, SW 10 2,132

Scrub Bottom W, F, B, SW 10 2,184

Scrub Jacket W, F, B, SW 10 2,652

Lab Coat STF, OH, CF 1 104

Patient Gown W, F, B, SW 5 208

Twin Sheet W, F, B, SW 10 2,548

Pillow Case W, F, B, SW 10 1,248

Blanket W, F, B, SW 3 312

Laundry Bag W, F, B, SW 1 416

TOTAL ITEMS 26,728

IDENTIFICATION, STANDARD PACKAGING AND METHOD OF FINISH. The following are the routine requirements for packaging of linen and method of finish for this contract (quantities, packaging and finishes are at local discretion). Any other special packaging requirements or methods of finish will be specified in writing at the time that service is requested.

Definitions of abbreviations for methods of finish are as follows:

B Bundled F Folded P Pressed W Washed SW Shrunk Wrapped CF Clear Film Sealed STF Steam Tunnel Finish (Alternate methods acceptable: industrial ironing press, form finishers, or hand-ironing with heavy-duty steam irons.)

OH On Hanger

Additional Instructions: Packaged amounts less than the quantities specified will be identified on the bundle.