PWS Hazardous Waste Services Riverside National Cemetery.pdf

Performance Work Statement (PWS) Hazardous Waste Removal and Tote Service

Riverside National Cemetery

PART 1

GENERAL INFORMATION

1. GENERAL: This is a non-personnel services contract for Hazardous Waste Removal and Tote Service. The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.

1.1 DESCRIPTION OF SERVICES/INTRODUCTION: The Contractor, its agents, employees, and any subcontractors (henceforth known as the Contractor) shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform Hazardous Waste Removal and Tote Service as define in this Performance Work Statement except for those items specified as government furnished property and services. The Government requires services on a recurring basis. There shall be no penalty if the Government facility requires more or less than the estimated pickups or disposal volume outlined in the contract. The Contractor shall perform to the standards in this contract.

1.2 BACKGROUND: The Department of Veterans Affairs, National Cemetery

Administration (NCconA), is responsible for maintaining a safe, dignified, and environmentally compliant burial environment at national cemeteries. As part of ongoing cemetery operations, various hazardous wastes may be generated, including but not limited to used oils, solvents, paints, herbicides, pesticides, batteries, and universal waste.

These materials require proper handling, transportation, and disposal in accordance with all applicable federal, state, and local environmental regulations. The purpose of this requirement is to ensure that hazardous waste generated at Riverside National Cemetery (RNC) are removed safely, efficiently and in full compliance with Environmental Protection Agency (EPA), Department of Transportation (DOT), and Occupational Safety and Health Administration (OSHA) standards. This service is essential to protect human health, preserve environmental integrity, and maintain operational readiness at the cemetery.

1.3 OBJECTIVE: The objective of this requirement is to obtain professional hazardous waste removal and disposal services to ensure that all hazardous materials generated at Riverside National Cemetery are properly identified, collected, transported, and disposed of in compliance with all applicable federal, state, and local environmental regulations.

The Contractor shall provide all necessary labor, equipment, containers, documentation, and certifications required to safely and legally manage hazardous waste, thereby supporting the National Cemetery Administration’s mission to maintain a safe, respectful and environmentally responsible resting place for Veterans and their eligible family members.

1.4 SCOPE: The Contractor shall provide all labor, equipment, tools, materials, transportation, and supervision necessary to safely collect, transport, replace, and dispose of hazardous and regulated waste generated at Riverside National Cemetery.

Services include recurring semi-annual tasks and specific one-time services at RNC in accordance with California Code Regulation Title 22, § 66262.16. Semi-annual (NTE 180 days) Recurring services shall include:

• Semi-annual pump out and disposal of 1500 gallons of wastewater from the Phase 4 Maintenance Yard Water Maze.

• Semi-Annual removal and replacement of three (3) 330gallon steel totes: three (3) new 330 gallon steel totes delivered; three (3) expended 330 gallon steel totes collected:

- Tote 1: Filled oil waste.

- Tote 2: Antifreeze/coolant.

- Tote 3: Mixed oil and antifreeze.

• Semi-Annual removal and replacement: four (4) new 55-gallon UN Rated drums delivered without lids; four (4) expended 55-gallon UN Rated drums without lids collected:

- Four (4) UN Rated drums at Phase 4 Maintenance yard:

* One UN Rated drum – Aerosol cans disposal.

* One UN Rated drum – Oil filters disposal.

* One UN Rated drum – Oil absorbent pads disposal.

* One UN Rated drum – Oil sweep debris disposal.

• Semi-annual disposal of fluorescent light tubes – pickup and disposal of 4ft and 8ft fluorescent light tubes. 4ft = 30 each and 8ft = 30 each.

• Semi-annual disposal of water-based and oil-based paints – haul away 1-gallon and 5-gallon containers:

1 gallon – Oil (1 each) 1 gallon – Water (1 each) 5 gallon - Oil (1 each) 5 gallon - Water (1 each)

One-time service shall include:

• Pump out used coolant from 55 gallon UN Rated drum, including disposal of all waste in compliance with applicable regulations.

• Delivery of three (3) 330-gallon steel IBC pallet waste storage totes, compliant with EPA, state, and federal regulations.

1.5 PERIOD OF PERFORMANCE:

The period of performance shall be for one (1) Base Year of 12 months and four (4) 12-month option years. The Period of Performance reads as follows:

Base Year: Date of Award 2026-January 04, 2027 Option Year I: January 05, 2027-January 04, 2028 Option Year II: January 05, 2028-January 04, 2029 Option Year III: January 05, 2029-January 04, 2030 Option Year IV: January 05, 2030-January 04, 2031

1.6 GENERAL INFORMATION

1.6.1 QUALITY CONTROL: The Contractor shall develop and maintain an effective quality control program to ensure services are performed in accordance with this PWS. The Contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The Contractor’s quality control program is the means by which he assures himself that his work complies with the requirement of the contract. Contractor shall provide quality control plan 1 month post award.

1.6.2 QUALITY ASSURANCE: The government shall evaluate the Contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan. This plan is primarily focused on what the Government must do to ensure that the Contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable defect rate(s).

1.6.3 RECOGNIZED HOLIDAYS: Work is normally not conducted on Federal holidays unless otherwise authorized by the COR. The following is a list of the Federal holidays

January New Year’s Day January Martin Luther King Jr.’s Birthday February Washington’s Birthday May Memorial Day June Juneteenth July Independence Day September Labor Day October Columbus Day

November Veterans Day November Thanksgiving Day December Christmas

When a holiday falls on Sunday, the following Monday will be observed as a Federal Holiday. When a holiday falls on a Saturday, the preceding Friday will be observed as a Federal Holiday by U.S. Government Agencies. Also included would be any day specifically declared by the President of the United States of America as a Federal Holiday.

1.6.4 HOURS OF OPERATION: The Contractor is responsible for conducting business, between the hours of 8:30am to 3:30pm Monday through Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. For other than firm fixed price contracts, the Contractor will not be reimbursed when the government facility is closed for the above reasons. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential.

1.6.5 PLACE OF PERFORMANCE:

The work to be performed under this contract will be performed at:

Riverside National Cemetery 22495 Van Buren Boulevard Riverside, CA 92518

1.6.6 TYPE OF CONTRACT: The government will award a definitive firm fixed price contract.

1.6.7 SPECIAL QUALIFICATIONS:

Regulatory Certifications and Compliance

EPA Registration/Identification Number for hazardous waste handling and disposal

The Contractor must be appropriately licensed and/or permitted to perform the work described in the Performance Work Statement.

The Contractor personnel and equipment shall meet all safety requirements set forth in Federal, State, and local laws and regulations (e.g. 29 CFR 1910 Occupation Safety and Health Administration Regulations, Title 40 Code of Federal Regulations

(CFR), Resource Conservation and Recovery Act, and 49 CFR 100- 185).

The Contractor shall maintain the necessary permits and EPA identification to properly dispose of the waste.

Trained and Certified Personnel

The Contractor must have a satisfactory record of performance and compliance with all Federal, State, and local rules and regulations concerning the handling, packaging, transportation, storage and disposal of hazardous waste.

It is the Contractor’s responsibility to comply with EPA, RCRA, DOT and other environmental regulations.

The Contractor shall manage and have procedures and provisions to handle emergencies, accidents, and spills related to transportation.

Licensed Transporter

Hazardous waste generated by RNC shall be disposed of by the Contractor in accordance with Federal, State, and local regulations governing hazardous waste and destruction.

The Contractor shall be required to comply with all changes to such Federal, State, and local regulations and procedures which occur during the term of this contract

The Contractor shall have no EPA enforcement actions (civil or criminal) against them in the previous three (3) years or during the duration of the contract. If either of the above statements is proven to be true, the Government can exercise its right to immediately terminate the contract without cause or compensation.

The Contractor shall provide all manifests and documentation that apply to the removal and disposal of hazardous waste conducted by its workforces at initial pick-up of the waste and a final copy after waste is accepted by the destination facility.

1.6.8 POST AWARD CONFERENCE/PERIODIC PROGRESS MEETINGS: The

Contractor agrees to attend any post award conference convened by the contracting activity or contract administration office in accordance with Federal Acquisition Regulation Subpart 42.5. The contracting officer, Contracting Officers Representative (COR), and other Government personnel, as appropriate, may meet periodically with the Contractor to review the Contractor's performance. At these meetings the contracting officer will apprise the Contractor of how the government views the Contractor's performance and the Contractor will apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the government.

1.6.9 CONTRACTING OFFICER REPRESENTATIVE (COR): The (COR) will be identified by separate letter. The COR monitors all technical aspects of the contract and assists in contract administration The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract: perform inspections necessary in connection with contract performance: maintain written and oral communications with the Contractor concerning technical aspects of the contract: issue written interpretations of technical requirements, including Government drawings, designs, specifications: monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies; coordinate availability of government furnished property, and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order.

1.6.10 KEY PERSONNEL: The following personnel are considered key personnel by the government: Facilities Work Leader Robert Mandeville, Program Support Assistant Jamie Parker, and or COR Lincoln Sii. The Contractor shall provide a contract manager who shall be responsible for the performance of the work. The name of this person and an alternate who shall act for the Contractor when the manager is absent shall be designated in writing to the contracting officer. The contract manager or alternate shall have full authority to act for the Contractor on all contract matters relating to the daily operation of this contract. The contract manager or alternate shall be available between 8:00am to 4:30pm, Monday through Friday, except for the Federal holidays or when the government facility is closed for administrative reasons. Contractor shall provide a key personnel list 1 month post award.

1.6.11 PICK UP OF CONTAINERS:

Semi-annual (180 days) from the First pick-up and recurring services.

Arrival & Check-In

• Check in with COR or designated staff.

• Escort to waste storage area by COR or designated staff.

Inspect Containers with COR or designated staff

Verify labels, integrity, closures.

• Prepare manifests or bills of lading.

Load Safely

• Wear PPE: gloves, safety glasses, steel-toed boots.

• Use forklifts/pallet jacks as needed.

• Secure all containers upright and strapped.

• Spill kit on site; clean any drips immediately.

Complete Documentation

• Hazardous Waste: EPA Uniform Manifest.

• Get generator/transporter signatures before departure.

• Leave COR a signed copy or send within 24 hrs.

Final Site Check

• COR or designated staff confirms area is clean and empty.

• Contractor signs out with COR or designated staff.

• Load secured before exit.

After Disposal

• Within 5 business days, send COR:

– Certificates of Disposal/Recycling

– Final signed manifests

• Keep records: 3 years.

1.6.12 MISSED PICK UPS:

• If unable to make a scheduled pick-up, notify COR at least 24 hours in advance with reason and new date/time (must be within 2 business days).

• Same-day issues: call COR immediately, then confirm by email.

• Rescheduled pick-ups must occur at no additional cost to the Government.

• If service cannot be rescheduled within 2 business days, the Government may use another vendor and deduct costs.

• Contractor must submit a Missed Service Report within 1 business day after a missed date.

• Two or more missed pickups in 90 days may result in a Cure Notice or termination for default.

1.6.13 REQUIRED DOCUMENTATION:

EPA Uniform Hazardous Waste Manifest: Tracks hazardous waste from the point of generation to final disposal must be provided within 5 business days of waste pick up Non-Hazardous Waste Manifest or Bill of Lading: Tracks non-RCRA regulated waste or universal waste (e.g. batteries, florescent bulbs) must be provided within 5 business days of waste pick up Certificate of Disposal: Confirms that the waste has been properly disposed of by the designated facility must be provided within 5 business days of waste disposal Quarterly Summary Reports: Provides an overview of all waste pickups, volumes, disposal methods, and compliance status must be provided by the first Monday of every new quarter

1.6.14 CONDUCT ON RIVERSIDE NATIONAL CEMETERY PROPERTY:

Persons in and on the property, shall comply with the instructions of Riverside National Cemetery, other authorized officials, and posted signs or notices.

Entering or being on the property, or operating a motor vehicle thereon, by a person under the influence of intoxicating beverages, narcotics, hallucinogenic or dangerous drugs, or marijuana, or the consumption of such beverages or the use of such drugs or marijuana in or on the property is prohibited. Intoxicants, nonprescription narcotics, and other controlled substances (21 CFR Part 1308) are prohibited on the property. No person while on the property shall carry firearms, other dangerous or deadly weapons, or explosives, either openly or concealed, except for official purposes. According to 18 United States Code, Section 930, “dangerous weapon” means “a weapon, device, instrument, material, or substance, animate or inanimate, that is used for, or is readily capable of, causing death or serious bodily injury.

PART 2

DEFINITIONS & ACRONYMS

2. DEFINITIONS AND ACRONYMS:

2.1. DEFINITIONS:

2.1.1. CONTRACTOR: A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

2.1.2. CONTRACTING OFFICER: A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3. CONTRACTING OFFICER'S REPRESENTATIVE (COR): An employee of the U.S. Government appointed by the contracting officer to administer the contract.

Such an appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have the authority to change the terms and conditions of the contract.

2.1.4. DEFECTIVE SERVICE: A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.5. DELIVERABLE: Anything that can be physically delivered but may include non-manufactured things such as meeting minutes or reports.

2.1.6. KEY PERSONNEL: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the personnel that are listed in the proposal.

2.1.7. PHYSICAL SECURITY: Actions that prevent the loss or damage of Government property.

2.1.8. QUALITY ASSURANCE: The government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.9. QUALITY ASSURANCE SURVEILLANCE PLAN (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of Contractor performance.

2.1.10. QUALITY CONTROL: All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.11. SUBCONTRACTOR: One that enters into a contract with a prime Contractor.

The Government does not have privity of contract with the subContractor.

2.1.12. WORKDAY: The number of hours per day the Contractor provides services in accordance with the contract.

2.1.12. WORK WEEK: Monday through Friday, unless specified otherwise.

2.2. ACRONYMS:

CFR Code of Federal Regulations COR Contracting Officer Representative FAR Federal Acquisition Regulation CO Contracting Officer DOT Department of Transportation HAZMAT Hazardous Waste Material HAZWOPER Hazardous Waste Operations and Emergency Response OSHA Occupational Safety and Health Administration POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement RCRA Resource Conservation and Recovery Act QA Quality Assurance QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program RCRA Resource Conservation and Recovery Act TE Technical Exhibit

PART 3

SPECIFIC TASKS

3. SPECIFIC TASKS

The Contractor shall perform the following tasks:

3.1 SPECFIC TASKS/CONTRACT LINE-ITEM NUMBERS

CLIN 0001 Semi-Annual remove/replace: three (3) new 330-gallon steel totes delivered;

three (3) expended 330 gallon steel totes collected:

Preferred delivery dates January 5 and July 6

• Tote 1 – Oil waste.

• Tote 2 – Antifreeze/coolant.

• Tote 3 – Mixed oil and antifreeze.

CLIN 0002 Semi-annual remove/replace: four (4) new 55-gallon UN Rated drums delivered without lids; four (4) expended 55-gallon UN Rated drums without lids collected:

Preferred delivery dates January 5 and July 6

• Four (4) UN Rated drums at Phase 4 Maintenance yard – one each for aerosol cans, oil filters, oil absorbent pads, and oil sweep debris.

CLIN 0003 Semi-annual pump out and disposal of wastewater:

Preferred delivery dates January 5 and July 6 Removal 1500 gallons from the Phase 4 Maintenance yard Water Maze.

CLIN 0004 Semi-annual pickup and disposal of 4ft and 8ft fluorescent light tubes:

Preferred delivery dates January 5 and July 6 At Phase 4 Maintenance yard. Will remove 4ft and 8ft fluorescent light tubes from the insulated box (40x48x48) - 4ft = 30 each and 8ft = 30 each.

CLIN 0005 Semi-annual haul away and disposal of water-based and oil-based paints:

Preferred delivery dates January 5 and July 6 1-gallon and 5-gallon containers. 1-gallon = Oil – 1 each and Water – 1 each and 5-gallon = Oil – 1 each and Water – 1 each

CLIN 0006 One-Time Pump Out of coolant/anti-freeze:

55-Gallon UN Rated Drum, Including Disposal of All Waste in compliance with applicable regulations

CLIN 0007 Equipment Mobilization / Removal.

Initial delivery of three (3) 330 gallons steel IBC pallet waste storage totes:

Final removal of three (3) 330 gallons steel IBC pallet waste storage totes Compliant with EPA, state, and federal regulations.

IBC Tank with Steel Pallet - 330 Gallon with the following capabilities:

High-strength all-steel industry workhorse. Store and dispense water, pesticides or other liquids and powders.

Chemical-resistant HDPE tank surrounded by a galvanized steel cage.

Stack up to 3 high. 4-way fork access.

6" diameter fill cap; 2" diameter drain with on/off butterfly valve.

Meets FDA requirements.

*Please see 5.5 Attachment 5/Technical Exhibit 5 – Picture of 330-gallon Steel Pallet Tote*

MODEL

NO.

DESCRIPTION

DIMENSIONS

L x W x H

CAPACITY

UN

RATING

WT.

(LBS.)

H-4420 Steel Pallet 48 x 40 x 53" 330 Gallon 31HA1/Y 146

PART 4

APPLICABLE PUBLICATIONS

4. APPLICABLE PUBLICATIONS: All work must comply with applicable federal, state, and local regulations, including but not limited to:

4.1 EPA regulations for hazardous waste handling and disposal.

4.2 Hazardous Waste Collection: Safe and efficient collection of hazardous waste materials from RNC facility.

4.3 California Department of Toxic Substances Control (DTSC) guidelines.

4.4 OSHA standards.

4.5 DOT regulations for transportation of hazardous materials.

4.6 Environmentally responsible disposal of hazardous waste in compliance with regulations.

4.7 Recycling and Reclamation: Sustainable management of hazardous materials through recycling and reclamation.

PART 5

ATTACHMENT/TECHNICAL EXHIBIT LISTING

5. ATTACHMENT/TECHNICAL EXHIBIT LISTING

5.1 Attachment 1/Technical Exhibit 1 – Quality Assurance Plan (QASP)

5.2 Attachment 2/Technical Exhibit 2 – Deliverables Schedule

5.3 Attachment 3/Technical Exhibit 3 – Estimated Workload

5.4 Attachment 4/Technical Exhibit 4 – Site Map

5.5 Attachment 5/Technical Exhibit 5 – Picture of 330-gallon Stell Pallet Tote

5.6 ATTACHMENT 6/TECHNICAL EXHIBIT 6 – Picture of 55-gallon UN Rated steel drum

ATTACHMENT 1/TECHNICAL EXHIBIT 1

QUALITY ASSURANCE SURVEILLANCE PLAN (QASP)

Quality Assurance Surveillance Plan ** QASP The Contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimum acceptable levels of service required for each requirement. These thresholds are critical to mission success and may impact payment and/or CPARS.

Task/Service Performance Standard

AQL

(Acceptable Quality Level)

Surveillance Method

Incentive/Remedy

Semi-annual tote exchange

Totes removed, replaced, labeled, and waste disposed at permitted facility;

manifests provided within 5 business days.

95% compliance; no damage/spills.

COR

inspection;

document review.

Favorable CPARS, continued option year eligibility. Re-performance, corrective action, negative CPARS

Semi-annual 55-gallon UN Rated drum exchange

UN Rated Drums removed, replaced, labeled, and waste disposed at permitted facility;

manifests provided within 5 business days.

95% compliance; no damage/spills.

COR

inspection;

document review.

Favorable CPARS, continued option year eligibility. Re-performance, corrective action, negative CPARS

Semi-annual Water Maze wastewater pump-out

Pump-out completed safely;

system left operational;

manifests and service report within 5 business days.

95% compliance.

COR

inspection;

before/after photos;

manifest review.

Favorable CPARS, continued option year eligibility. Re-performance, corrective action, negative CPARS

Semi-annual fluorescent tube disposal

Tubes removed without breakage;

disposed at authorized recycling/disposal facility; manifest provided.

95% compliance.

COR

inspection;

manifest review.

Favorable CPARS, continued option year eligibility. Re-performance, corrective action, negative CPARS

Semi-annual paint disposal

Paint containers removed and

95% compliance.

COR

inspection;

Favorable CPARS, continued option year disposed at permitted facility;

manifests provided.

manifest review.

eligibility. Re-performance, corrective action, negative CPARS

One-time 55-gallon UN Rated drum coolant/anti-freeze pump-out

UN Rated Drum pumped out, including disposed at permitted facility;

manifests provided.

100% compliance;

site restored.

COR

inspection;

manifest review.

Require re-performance.

One-time three 330 gallon steel tote delivery

Three totes delivered in new/usable condition; meet

UN/DOT

standards.

100% compliance.

COR

inspection;

spec sheet review.

Reject and replace at no cost.

ATTACHMENT 2/TECHNICAL EXHIBIT 2

DELIVERABLES SCHEDULE

Deliverable Frequency # of Copies Submit To Quality Control Plan

PWS 1.6.1

1 month post award 2 CO/COR

Key Personnel List

PWS 1.6.10

1 month post award 2 CO/COR

EPA Uniform Hazardous Waste Manifest PWS 1.6.13

5 Business days post pick up

1 COR

Non-Hazardous Waste manifest or Bill of Lading PWS 1.6.13

5 Business days post pick up

1 COR

Certificate of Disposal PWS 1.6.13

5 Business days post waste disposal

1 COR

Semi-annual PWS 1.6.13

Day of pick every new semi-annual

1 COR

ATTACHMENT 3/TECHNICAL EXHIBIT 3

ESTIMATED WORKLOAD

Item Estimated Size Estimated QTY Pick Ups Waste Oil Tote 330-gallon steel pallet 1 2

Antifreeze/Coolant Tote 330-gallon steel pallet 1 2 Mixed Oil and Antifreeze Tote 330-gallon steel pallet 1 2

Aerosol Can 55 Gallon UN Rated

Drum 1 2

Oil Filters 55 Gallon UN Rated Drum

1 2

Oil Absorbent Pads 55 Gallon UN Rated Drum

1 2

Oily Sweep Debris 55 Gallon UN Rated

1 2

Wastewater from Phase 4

Maintenance yard Water Maze 1500 gallon 1 2

Pickup and Proper Disposal of 4ft and 8ft Fluorescent Light

Tubes

4ft = 30 each and 8ft = 30 each.

60 2

Pickup and Proper Disposal of Water-Based and Oil-Based

Paints – 1-gallon and 5-gallon containers

1-gallon and 5-gallon containers.1-gallon = Oil

– 1 each and Water – 1 each and 5-gallon = Oil – 1 each and Water – 1 each

4 2

Initial Delivery and final Collection of Three (3) 330 gallons Steel IBC Pallet Waste Storage Totes, compliant with EPA, state, and federal regulations.

Delivery three (3) 330-gallon Steel Pallet Totes

3 N/A

One-time 55-gallon UN Rated drum coolant/anti-freeze pump-out

55 Gallon UN Rated

1 N/A

ATTACHMENT 4/TECHNICAL EXHIBIT 4

ATTACHMENT 5/TECHNICAL EXHIBIT 5

MODEL

NO.

DESCRIPTION

DIMENSIONS

L x W x H

CAPACITY

UN

RATING

WT.

(LBS.)

H-4420 Steel Pallet 48 x 40 x 53" 330 Gallon 31HA1/Y 146

ATTACHMENT 6/TECHNICAL EXHIBIT 6