PWS Camera Maintenance.pdf

PERFORMANCE WORK STATEMENT (PWS) For

INSTALLATION CLOSED CIRCUIT TELEVISION

(CCTV) CAMERA MAINTENANCE

SCOTT AFB IL

03 MAR 2022

1. GENERAL: This is a non-personal services contract to provide quarterly Preventive Maintenance Inspection (PMI) of Scott AFB cameras system to include all other associated equipment such as digital recording devices, camera housing units and cabling. The contractor will also be responsible for service responses for unscheduled camera and associated equipment outages as outlined in this PWS. The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government. This contract will be funded for a base year.

1.1 Description of Services/Introduction: The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform quarterly PMI as defined in this PWS except for those items specified as government property and services (see attached List of Equipment). The contractor shall perform to the standards in this contract.

1.2 Background: The Base Camera System is an enhanced security measure. The cameras provide monitoring of all customers entering and exiting facilities on Scott AFB. The cameras also assist the Base Defense Operations Center in monitoring facilities during and after normal duty hours.

1.3 Objectives: Inspect, test, clean and service all CCTV cameras and associated equipment. PMI work shall be accomplished in accordance with (IAW) manufacturer and maintenance manuals specifications for that specific equipment. Restore unscheduled service outages within the timelines outlined in this PWS. All the required work will be accomplished in accordance with United States Air Force regulations and industry standards.

1.4 Scope: This statement of work provides information for a contractor to provide the necessary trained and fully qualified personnel, supervision, task management, hardware, materials, tools, and technical services required for the successful accomplishment of the requirements and tasks set forth herein. The contractor shall be responsible for providing personnel with the necessary expertise to complete the assigned tasks satisfactorily. Personnel shall be capable of working independently and with working knowledge of the equipment required by this PWS. Tasks include:

1) Inspect, test, clean, and service the head-end video equipment, cabling, and fiber optic transceivers.

2) Inspect all monitors to ensure clarity, eliminate blooming, and minimize Radio Frequency (RF) interference and reduce the risk of burn-in by bright lights by repositioning stationary (staring) cameras.

3) Inspect and test all video matrix switches and digital video recorder functions, upgrade software during scheduled

Preventive Maintenance, and replace defective equipment as necessary.

4) Clean all fiber optic connections at transceiver location and all intermediate patch panels with appropriate cleaning materials as stated by manufacture and reconnect.

NOTE: This step is only required if the end-to-end fiber optic testing indicates there is a problem.

5) Perform an end-to-end power test of each camera location.

6) Inspect all power cables, fuses, circuit breakers, and lightning protection devices at each camera location.

7) Inspect the camera mounts at each location, repair, or replace if broken or worn beyond repair at the request of the

COR.

8) Inspect the lightning protection and grounding, replace if broken or worn beyond repair at the request of the COR.

9) Perform a complete system check upon completion of PMI Camera Assemblies.

10) Disassemble, visually inspect for cracks and corrosion, clean and repair all camera and housing assemblies.

11) Clean all contacts and connectors on the inside of the camera housings.

12) Test and repair interior heaters.

13) Replace desiccant packages within the camera housings.

14) Replace humidity detectors within camera housings.

15) Reassemble and weatherproof camera housings.

16) Recharge housings with Nitrogen after reassembly.

17) Repair and/or replace all broken/failing cameras.

18) All licenses will be transferred to the owner website (will be provided upon award of contract)

1.4.1 Scheduled Maintenance and Repair:

This is a non-personal services contract to provide quarterly Preventive Maintenance Inspection (PMI) of Scott AFB cameras system to include all other associated equipment such as digital recording devices, camera housing units and cabling. The contractor will also be responsible for service responses for unscheduled camera and associated equipment outages as outlined in this PWS. The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government. The quarterly PMI shall be completed during the months of October, January, April, and August. The contractor will notify and obtain approval from the on-site Contracting Officer Representative (COR) or designated representative in advance of scheduled PMI.

1.4.2 Service Calls:

All Camera systems will be operational 24-hours-per-day, 7-days-per-week. The contractor shall provide a centralized call-in number and e-mail address for reporting outages or service issues. It is not necessary that the centralized call-in number be manned 24/7, only that the contractor telephonically respond within one (1) hour from the placement of the outage service call to begin troubleshooting of the issue. When telephone trouble-shooting is unable to resolve the problem, the Contractor will dispatch a service technician to the site within one (1) day of the service call to begin repair of the system. The service technician must arrive on-site within the next business day to begin servicing/repairing of the system. Upon arrival at the site/location the Contractor is required to report in with the Contracting Officer’s Representative (COR). Only the services specified by this agreement are authorized, the Contractor is cautioned that ONLY the Contracting Officer (CO) may authorize additional services and that any authorized services provided by the Contractor without proper authorization from the Contracting Officer is done at Contractor’s risk and may not be reimbursed. The COR must be briefed on any work that needs to be accomplished and provided with a written work order documenting all work performed or services provided. All service calls shall be responded to without undue delay.

If the contractor is unable to respond to a service call or restore the service to its normal operational state, the Contractor shall compensate the Government for the downtime by prorating the monthly bill for the time (day) reflective of the period of non-service, equivalent to the downtime of the service. The Contractor will be responsible for ensuring that their personnel are instructed on performing service on Government property and are properly badged and easily identifiable. During normal duty hours (0800-1600), the contractor shall respond in person to all service call requests within 30 minutes. The contractor will specify the starting time and duration of any interruptions along with what cameras will be affected. The contractor will provide verbal notification to the on-site COR or designated representative immediately after service has been restored.

1.4.3 Current Camera Listing:

Here is the current listing of Security Camera’s:

6 EA - Bosch Dinion IP Starlight 6000, 8 EA - Bosch Dinion IP Starlight 7000, 3 EA – Bosch Flexidome IP 4000i IR, 1 EA – Bosch Flexidome IP Panoramic 7000 and 125 EA – Bosch Autodome IP Starlight 7000I.

1.4.4 Reimbursable Parts:

All equipment must meet Air Force Mandated Assessment Subsystems PL1 through PL4 applications and configurations. Including any model updated versions to the authorized Air Force list. All replaced equipment or parts remain the property of the Government. The Government retains the right to either approve or disapprove all parts, which are other than new OEM, used in performance of this contract. The contractor shall procure all required repair and replacement parts reimbursable by the government at cost. Contractor must receive approval prior to ordering parts.

All replacement parts under $3,500.00 will be approved by the COR. All replacement parts over $3,500.00 will be approved by the Contracting Officer.

1.4.4.1 Cameras that meet the Air Force Mandate are:

Axis Q1645 Fixed, Axis P3245-LVE, Axis Q3527-LVE, Axis Q6075 Indoor PTZ, Axis Q6075-E Outdoor PTZ, Axis Q6215-LE PTZ, Bosch 8001 Fixed Thermal, Bosch MIC IP Starlight 7100i, Bosch Auto Dome IP Starlight 7001i, Bosch DINION Internet Protocol IP Starlight 7000 HD, Bosch NBN-63013-B, Bosch NBN-63023-B, Bosch Flexidome Starlight 8000 Dual SD Variant, IQ Eye 752 IP, Pelco ES31CBW35-2N PTZ, Pelco ES30C/ES31C PTZ, Pelco ES4136-2NEsprit ES PTZ, Pelco MC3651H-2 Interior, Pelco IXE20 IP, Pelco P1220-ESRI PTZ, Pelco Sarix IXE Series Box w/SureVision 3.0.

1.4.4.2 Cameras model updated versions that meet the Air Force Mandate are:

Bosch NWC-04-95-20P IP, Bosch NWC-04-95-20P 1/3 format, Bosch NBN-498-21P IP, Bosch Auto Dome VG 4-322-ECE1M, Bosch Auto Dome VG5-623-ECS, Bosch Auto Dome VG5-624-ECS, Bosch Auto Dome VG5- 7240ECE2, Bosch NBN-71013-B, Bosch NBN-71022-B, Pelco ES4036-5W Esprit Series, Pelco ES40E36-5W Esrit Series, Pelco ES40/41 Series Positioning System, analog PTZ, Pelco ES40E/41EIP PTZ, Pelco IXE21 IP.

1.5 Original Equipment Manufacturer (OEM) Parts:

Only new OEM parts or parts of equal quality (when authorized by the Government in advance) shall be used for repair.

All replacement parts used for maintenance activities under this contract become the property of the Government. The faulty parts, which were replaced, remain the property of the Government. The contractor may submit a listing of all anticipated parts which will not be new OEM but of equal quality to the COR for review and approval in advance of the work requirements or obtain the approval of the on-site COR or designated representative prior to installation of the parts. The Government retains the right to either approve or disapprove all parts, which are other than new OEM, used in performance of this contract.

1.6 Training: Contractor will provide refresher-training classes on camera system operations when performing on- site preventive maintenance (PMI). Training will consist of camera location, multiplexer operation, and Digital Video Recorder familiarization at all locations with associated equipment. Refresher training classes will be scheduled prior to contractor’s arrival on the installation. Additionally, the contractor shall provide a listing of all cameras and associated equipment locations.

1.7 Period of Performance: The period of performance shall extend for one year after the date of award with the potential of additional option years if the service is still a requirement.

01 Apr 22 to 31 Mar 23 – Base Year 01 Apr 23 to 31 Mar 24 – Option Year 1 01 Apr 24 to 31 Mar 25 – Option Year 2 01 Apr 25 to 31 Mar 26 – Option Year 3 01 Apr 26 to 31 Mar 27 – Option Year 4

1.8 Services Summary:

Performance Objective PWS Para Performance Threshold

Perform Inspections on Security Cameras. 1.4.1 Scheduled Maintenance listed in Para

1.4 performed quarterly in the months of January, April, August, and October.

Perform Service Calls as needed on Security Cameras.

1.4.2 During normal duty hours (0800-1600), the contractor shall respond in person to all service call requests within 30 minutes. After hours, contractor telephonically responds within one (1) hour from the placement of the outage service call to begin troubleshooting of the issue.

Service technician must arrive on-site within the next business day to begin servicing/repairing of the system.

1.9 General Information

1.9.1 Quality Control: The contractor shall develop and maintain an effective quality control program, to ensure services are performed in accordance with this SOW. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s quality control program is the means by which he assures himself that his work complies with the requirement of the contract. A written QCP will be submitted within 30 days after contract award for acceptance. After acceptance of the quality control plan the contractor shall receive the contracting officer’s acceptance in writing of any proposed change to his QC system. The contractor will provide BOSCH Video Management System with Divar IP Storage (Classroom), Bosch Video Management System (Classroom) and BOSCH Video Management System (Exam) certification for all installers and programmers.

1.9.2 Recognized Holidays: The contractor is not required to perform PMI services on holidays.

New Year’s Day Labor Day Martin Luther King Jr.’s Birthday Columbus Day President’s Day Veteran’s Day Memorial Day Thanksgiving Day Independence Day Christmas Day

Juneteenth

1.9.3 Hours of Operation: The contractor is responsible for conducting business, between the hours of 0730-1630 Monday thru Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. For other than firm fixed price contracts, the contractor will not be reimbursed when the government facility is closed for the above reasons. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons.

1.9.4 Place of Performance: The work to be performed under this contract will be performed at the following locations:

Bldg.’s 1700, 1900, 1961, 3901, 470, 1830, 1820, 1850, 1006, 1980, 1981, 755, 1530, 1948, 5026 and 4780. Work will also be performed at Bldg.’s 4310, 1004, 1000, 590, 4130, Lincoln’s Landing Gate adjacent to Bldg. 4020, Cardinal Creek Gate adjacent to Bldg. 5490, 4700, Scott School Gate adjacent to Bldg. 4780, Heritage Gate adjacent to Bldg. P- 10, 3305, 3150, Bldgs. 1880/Metro Link. Work will also be performed at Bldg. 755/Base Defense Operations Center (BDOC) and Bldg. 1900/Central Security Control Center (CSCC) to verify all systems are operational.

1.9.5 Contractor Consent to Background Checks: The contractor and, as applicable, subcontractor shall not employ persons for work on this contract if such employee is identified as a potential threat to the health, safety, security, general well-being or operational mission of the installation and its population, nor shall the contractor or subcontractor employ persons under this contract who have an outstanding criminal warrant as identified by Law Enforcement Agency Data System (LEADS) through the National Crime Information Center. LEADS checks will verify if a person is wanted by local, state, and federal agencies. All contractor and subcontractor personnel must consent to LEADS background checks. Contractor and subcontractor personnel who do not consent to an LEADS check will be denied access to the installation. Information required to conduct an LEADS check includes: full name, driver’s license number, and/or social security number, date of birth of the person entering the installation, and completion of a background check questionnaire. The contractor shall provide this information using the Scott AFB Form 21, Contractors Consent for Background Check, and shall submit it in conjunction with the contractor’s request for either base or vehicle passes.

Contractor will also provide the date of birth, driver’s license number or Identification number, along with the full name of the person or persons whom will need access to the installation to perform maintenance to the SFS/ESS office no later than five business days prior to expected arrival to the installation. Completion of a successful LEADS check does not invalidate the requirement for an escort when contractor or subcontractor personnel are working within controlled or restricted areas. Contractors shall ensure their employees and those of their subcontracts have the proper credentials allowing them to work in the United States. Persons later found to be undocumented or illegal aliens will be remanded to the proper authorities. The contractor shall not be entitled to any compensation for delays or expenses associated with complying with the provisions of this clause. Furthermore, nothing in this clause shall excuse the contractor from proceeding with the contract as required.

1.9.6 Badges: The contractor is required to provide identification badges for their employees. All contractor personnel shall wear these badges while on duty on the government site. Badges are required to identify the individual, company name, and be clearly and distinctly marked as contractor. Size, color, style, etc. are to be mutually agreed to by contractor and government. The contractor’s identification badge will not be used as an entry requirement for installation entry or into any government designated controlled or restricted area.

1.9.7 Contractor Registration of Vehicles on Scott AFB: All contractor or contractor employees’ vehicles used for the performance of this contract shall comply with all local, state and federal regulations. Additionally any pass shall be surrendered to Security Forces upon demand to positively identify a person’s need to be on Scott AFB.

1.9.8 Access to Installation during Force Protection Conditions (FPCONs): Contractors will be assigned a mission essential designation IAW requirements contained in SAFBI 31-101/Installation Security Instruction. Only the installation commander or the unit commander requesting contract support will assign the mission essential designation.

1.9.9 Property Protection: Property protection for facility where the contractors’ primary work center is located will be the responsibility of the local facility manager and local Government Security Manager, or their duly authorized representative IAW AFI 31-101, The Air Force Installation Security Program and command/local directives. The contractor shall safeguard all government-owned equipment and materials in his/her possession or use.

1.9.10 Safeguarding Classified or Unclassified Information: The contractor shall meet Air Force standards for storing, processing, and handling classified information and systems. Additionally, all resources (e.g. maps, publication/instructions, photos) provided by the government to assist the contractor in the performance of their contract will be surrendered upon termination of employment or the end of the contract performance period.

1.9.11 Non-Disclosure Agreements: To safeguard information, the contractor shall enter into non-disclosure agreements with the responsible local security manager.

1.9.12 Privacy Act: Work on this project requires that personnel have access to Privacy Information. Personnel shall adhere to the Privacy Act, Title 5 of the U.S. Code, Section 552a and applicable agency rules and regulations.

1.9.13 Contractors Working in Controlled or Restricted Areas:

The unit requesting contract support will provide escort (s) for contractors’ at all times when within a controlled area.

Contractors shall not escort other contractor employees within controlled or restricted areas. In addition, contractors shall fulfill, maintain, and comply with all security requirements IAW AFI 31-101, The Air Force Installation Security Program, and command/local directives.

1.9.14 Access to Government Facilities with Controlled or Restricted Areas:

The contractor shall comply with security regulations imposed by the installation commander and/or the agency responsible for the project location. Due to specific mission requirements inherent in the nature of controlled or restricted areas on Scott AFB, the government may direct the contractor to leave the controlled or restricted areas at any given time.

1.9.15 Contractors Responsibilities while Working within Controlled or Restricted Areas:

Only contractor personnel with proper authority and qualifications shall enter a controlled or restricted area. Certain facilities require the issuance of an AF Form 1199CD. The government, at any time, may revoke the AF Form 1199CD.

The procedures for the issuance of an AF Form 1199CD are contained in SAFBI 31-101, Installation Security Instruction. Contractors shall not escort other contractor employees within controlled or restricted areas. In addition, contractors shall fulfill, maintain, and comply with all security requirements contained in SAFBI 31- 101, Installation Security Instruction.

1.9.16 Access to Government Facilities with Controlled or Restricted Areas for Replacement Contractors:

The unit requesting contract support will continuously escort replacement contractors, not initially possessing the proper clearances and requiring entry to controlled or restricted areas. Replacement contractors shall submit paperwork within 30 days of being assigned to obtain an approved security clearance or favorable review. Replacement contractor personnel shall obtain a security clearance prior to working with, or having direct access to, classified material. In addition, replacement contractor personnel shall obtain a “Favorable review” prior to having access to a Controlled Area. The above information shall be submitted to 375 SFS/S5I.

1.9.17 Contracting Officer Representative (COR): The (COR) will be identified by separate letter. The COR monitors all technical aspects of the contract and assists in contract administration The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract: perform inspections necessary in connection with contract performance: maintain written and oral communications with the Contractor concerning technical aspects of the contract: issue written interpretations of technical requirements, including Government drawings, designs, specifications: monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies; coordinate availability of government furnished property, and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order.

1.9.18 Key Personnel: The follow personnel are considered key personnel by the government:

Program Manager, Electronic System Security NCOIC, Electronic System Security 375 Security Forces Sq. 375 Security Forces Sq.

Phone: 618-256-5403 Phone: 618-256-1457

Email: ronald.powers.2@us.af.mil Email: joshua.haney@us.af.mil

1.9.19 The contractor shall provide a contract manager who shall be responsible for the performance of the work. The name of this person and an alternate who shall act for the contractor when the manager is absent shall be designated in writing to the contracting officer. The contract manager or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The contract manager or alternate shall be available between 0730-1630, Monday thru Friday except Federal holidays or when the government facility is closed for administrative reasons.

1.9.20 Identification of Contractor Employees: All contract personnel attending meetings, answering Government telephones, and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government officials. They must also ensure that all documents or reports produced by contractors are suitably marked as contractor products or that contractor participation is appropriately disclosed.

1.9.21 Data Rights: The Government has unlimited rights to all documents/material produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the Contracting Officer. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

1.9.22 Administrator, Operator Passwords and Licenses: All passwords (i.e. for Administrator and Operator) and licenses for the systems of operation will be turned over to SFS/ESS upon completion of project.

1.9.23 Government Items and Services:

• Facilities: Security Forces will coordinate escorts, building access, communication room access and access to additional rooms and facilities as required.

• Utilities: The Contractor shall instruct employees in utilities conservation practices. The contractor shall be responsible for operating under conditions that preclude the waste of utilities.

• Equipment: The Government will not provide any equipment for this contract.

• Materials: The Government will not provide any materials for this contract.

Attachment: List of equipment to be maintained

Building Location Manufacturer CAMERA AGE 1004 Shiloh Gate Gate 1 Inbound Bosch 6-7 Years Old Gate 2 Inbound Bosch 6-7 Years Old Gate 5 Outbound Bosch 6-7 Years Old Inbound (License Plate Reader) Bosch 6-7 Years Old Inbound (License Plate Reader) Bosch 6-7 Years Old Outbound (License Plate

Reader) Bosch 6-7 Years Old

Outbound (License Plate Reader)

Bosch 6-7 Years Old

SW Corner Bosch 6-7 Years Old NE Corner Bosch 6-7 Years Old Search Pit Bosch 6-7 Years Old Search Pit North Wall Bosch 6-7 Years Old Search Pit South Wall Bosch 6-7 Years Old

Building Location Manufacturer 590 Belleville Gate Gate 1 Inbound Bosch 6-7 Years Old Gate 3 Outbound Bosch 6-7 Years Old Inbound (License Plate Reader) Bosch 6-7 Years Old Inbound (License Plate Reader) Bosch 6-7 Years Old Search Pit (License Plate

Reader) Bosch 6-7 Years Old

Northeast Corner (Wall Mount) Bosch 6-7 Years Old West Wall Bosch 6-7 Years Old Search Pit Bosch 6-7 Years Old Search Pit South Wall Bosch 6-7 Years Old

Building Location Manufacturer 4130 Mascoutah Gate Gate 1 Inbound Bosch 6-7 Years Old Gate 2 Inbound Bosch 6-7 Years Old Gate 3 Outbound Bosch 6-7 Years Old

Building Location Manufacturer 1961 USTC Annex Auto Dome South West Corner Bosch 6-7 Years Old Auto Dome South East Corner Bosch 6-7 Years Old

Auto Dome North West Corner Bosch 6-7 Years Old

Building Location Manufacturer 1700 AFNIC Auto Dome Loading Dock Bosch 6-7 Years Old Fire Exit Door 1 Bosch 6-7 Years Old Fire Exit Door 2 Bosch 6-7 Years Old Fire Exit Door 3 Bosch 6-7 Years Old Fire Exit Door 4 Bosch 6-7 Years Old Fire Exit Door 5 Bosch 6-7 Years Old

Fire Exit Door 6 (Snack Bar) Bosch 6-7 Years Old Fire Exit Door 7 ( TIFF) Bosch 6-7 Years Old Tiff Breezeway Bosch 6-7 Years Old Loading Dock Interior Hallway Bosch 6-7 Years Old Loading Dock Doors Bosch 6-7 Years Old Main Entrance Bosch 6-7 Years Old East Entrance Bosch 6-7 Years Old

Building Location Manufacturer 1880 Metro link cam 1 Bosch 6-7 Years Old cam 2 Bosch 6-7 Years Old cam 3 Bosch 6-7 Years Old cam 4 Bosch 6-7 Years Old cam 5 Bosch 6-7 Years Old cam 6 Bosch 6-7 Years Old Cam 7 Bosch 6-7 Years Old

Lincolns Landing Gate Cam 1 Bosch 6-7 Years old Cam 2 Bosch 6-7 Years Old

Bldg. 1006 South East Corner Bosch 6-7 Years Old

Building Location Manufacturer Bldg. 1981 BX East Wall down RR tracks Bosch 6-7 Years Old West Wall down RR tracks Bosch 6-7 Years Old

Building Location Manufacturer Cardinal Creek Gate Northeast Bosch 6-7 Years Old Southeast Bosch 6-7 Years Old

Building

Location Manufacturer

South East Corner Bosch 6-7 Years Old

TRANSCOM/1900 Southeast Corner Bosch 6-7 Years Old

Building Location Manufacturer Bldg. 3901 Fire Station Taxiway Bosch 6-7 Years Old

Building Location Manufacturer Munitions Front of Building (Wall Mount) Bosch 6-7 Years Old Light Pole (Pole Mount) Bosch 6-7 Years Old Light Pole (Pole Mount) Bosch 6-7 Years Old Light Pole (Pole Mount) Bosch 6-7 Years Old Light Pole (Pole Mount) Bosch 6-7 Years Old

Building Location Manufacturer Patriot’s Gate East Wall Bosch 6-7 Years Old Light Pole Bosch 6-7 Years Old

Building Location Manufacturer Scott School Gate Guard Shack (Vehicle Gate) Bosch 6-7 Years Old

Building Location Manufacturer Wastewater Treatment Plant

East Down RR Bosch 6-7 Years Old

Bldg. 4780 Youth Center North Side Parking Lot Bosch 6-7 Years Old

Heritage Gate Outbound Traffic Bosch 6-7 Years Old Inbound Traffic Bosch 6-7 Years Old

DVR

Bldg. 755 Camera DVR HP ProLoriant DL380P Gen 8 Server ProLoriant DL 380 GEN 10 Server ProLoriant DL 380 GEN 10 DIVAR 6000 Bosch DIVAR 5000 Bosch Workstation Bosch Workstation Bosch License Plate Reader DVR Dell PowerEdge R220

Bldg. 1850 Shiloh Dorms Ceiling above gaming tables Bosch 6-7 Years Old South East Stairwell Bosch 6-7 Years Old South West Stairwell Bosch 6-7 Years Old Main Entrance Bosch 6-7 Years Old West Side (Interior) Bosch 6-7 Years Old West Side (Exterior) Bosch 6-7 Years Old East Side Wall (Exterior) Bosch 6-7 Years Old

Bldg. 1820 Belleville Dorms

Ceiling above gaming tables Bosch 6-7 Years Old

South East Stairwell Bosch 6-7 Years Old South West Stairwell Bosch 6-7 Years Old Main Entrance Bosch 6-7 Years Old West Side (Interior) Bosch 6-7 Years Old

Building Location Manufacturer Bldg. 1830 Mascoutah Dorms

Ceiling above gaming tables Bosch 6-7 Years Old

South East Stairwell Bosch 6-7 Years Old South West Stairwell Bosch 6-7 Years Old Main Entrance Bosch 6-7 Years Old West Side (Interior) Bosch 6-7 Years Old West Side (Exterior) Bosch 6-7 Years Old East Side (Exterior) Bosch 6-7 Years Old

Building Location Manufacturer Bldg. 1980 Commissary Top North East corner Bosch 6-7 Years Old

Breezeway Canopy Ceiling Bosch 6-7 Years Old Building Location Manufacturer

Bldg. 1981 BX Top South East corner Bosch 6-7 Years Old Breezeway Canopy Ceiling Bosch 6-7 Years Old

Building Location Manufacturer Bldg.1000 Visitor Control Center

Top West Corner Bosch 6-7 Years Old

North East Corner Bosch 6-7 Years Old Interior Waiting Area Bosch 6-7 Years Old Interior Service Counter Bosch 6-7 Years Old

Bldg. 755 Women’s Cell (6) Bosch 6-7 Years Old

West Exterior (9) Bosch 6-7 Years Old West Entry (2) Bosch 6-7 Years Old

North Exterior Corner Bosch 6-7 Years Old North East Entrance Bosch 6-7 Years Old Men’s 2 (8) Bosch 6-7 Years Old

Men’s 1 (7) Bosch 6-7 Years Old

Holding Cell 1 Rm Bosch 6-7 Years Old Holding Cell 2 Rm Bosch 6-7 Years Old 755 Main Entry (12) Bosch 6-7 Years Old

BDOC Entrance Bosch 6-7 Years Old

Confinement Rec Bosch 6-7 Years Old

East Exterior (13) Bosch 6-7 Years Old Woman’s Confinement Bosch 6-7 Years Old

Men’s Confinement Bosch 6-7 Years Old 755 Armory Hall (10) Bosch 6-7 Years Old Armory Window (15) Bosch 6-7 Years Old Armory Window (7) 6-7 Years Old Armory Hall 1 (4) 6-7 Years Old BDOC Phone (5) 6-7 Years Old Confinement Hallway (28) 2-3 Years old Outside of Confinement (6) 3-4 Years Old Armory Weapon return (27) 3-4 Years Old Armory (26) 3-4 Years Old South Exit Front Entry (85) Building Location Manufacturer Bldg. 1530 Main RX Lobby Bosch 6-7 Years Old

Building Location Manufacturer Bldg. 1948 Refill RX Lobby 6-7 Years Old

Building Location Manufacturer Bldg. 470 Cat Hallway 470 (44) Bosch 6-7 Years Old Building Location Manufacturer Bldg . 5026 Northwest Corner Bosch 6-7 Years Old

Southwest Corner Bosch 6-7 Years Old

Bldg. 4001 Vault Bosch 6-7 Years Old

Building Location Manufacturer Bldg. 5016 Alt BDOC Bosch 6-7 Years Old

Building Location Manufacturer Bldg. 5036 PTZ Bosch 6-7 Years Old SW PTZ Bosch 6-7 Years Old

Building Location Manufacturer Bldg. 560 NE PTZ Bosch 6-7 Years Old NW PTZ Bosch 6-7 Years Old

Building Location Manufacturer Storage Vault Bosch 6-7 Years Old

Building Location Manufacturer Bldg. P5 Dinion IP 6000 Bosch 3-4 Years Old Dinion IP 6000 Bosch 3-4 Years Old Dinion IP 6000 Bosch 3-4 Years Old Dinion IP 6000 Bosch 3-4 Years Old Dinion IP 6000 Bosch 3-4 Years Old Dinion IP 6000 Bosch 3-4 Years Old

Building Location Manufacturer Bldg. P61 Starlight 7000 Bosch 3-4 Years Old Starlight 7000 Bosch 3-4 Years Old

Starlight 7000 Bosch 3-4 Years Old Starlight 7000 Bosch 3-4 Years Old Starlight 7000 Bosch 3-4 Years Old

Building Location Manufacturer Bldg. CVIS Decoder Bosch 6-7 Years Old

Bldg. Armory Decoder Bosch 6-7 Years Old