PWS Appendix C - Crane Hoist and Lift (NAVFAC P-307 Certs).pdf
PDF 100 KB Posted
- Attached to
- Preventive Maintenance and Repair Services for Lift Equipment at Joint Base Charleston, South Carolina
- Solicitation number
- FA4418HOISTCRANELIFT
About this file
This Performance Work Statement (PWS) details certification requirements for technicians performing maintenance on cranes, hoists, and lifts at Naval Nuclear Power Training Unit (NPTU). The document specifies eight mandatory training courses that Electrical and Mechanical Technicians must complete before conducting preventative maintenance, corrective repairs, inspections, annual certifications, and quadrennial load tests, including General Crane Safety, Category-3 Non-Cab Operated Crane Safety, Crane Electrician, Electrical Crane Inspector, Crane Mechanic, Mechanical Crane Inspector, Rigging Gear Inspection, and Load Test Director. Course lengths range from 4 to 24 instructional hours, and technicians' training certifications must be submitted to Naval Facilities South East (NAVFACSE) for approval to perform services on NPTU's cranes.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PERFORMANCE WORK STATEMENT
FOR
MAINTAINING CRANES, HOISTS & LIFTS
Appendix C
1. U.S. NAVY NAVFAC P307 CERTIFICATION.
1.1. Maintenance – Inspections - Certifications. As per PWS paragraph 1.3.3. Prior to performing preventative maintenance, corrective maintenance/repairs, inspections, annual certifications and quadrennial load tests on Cranes, Hoists & Lift equipment at Naval Nuclear Power Training Unit (NPTU), the Contractor’s Electrical and Mechanical Technicians must satisfactorily complete all required training courses and exams per NAVFAC P307. The COR via the NPTU designated “Site Crane and Weight Handling Supervisor” will submit the Contractor Technicians training certifications to Naval Facilities South East (NAVFACSE), the “Certifying Official” for approval of the Contractor’s Technicians to perform services on NPTU’s Cranes.
1.2. Current Required Courses (Subject to change by add/deletion of courses).
COURSE TITLE COURSE ID INSTRUCTIONAL
HOURS
1 General Crane Safety NCC-GCS-04 16 2 Category-3 Non-Cab Operated Crane
Safety
NCC-C3CS-04 16
3 Crane Electrician NCC-CE-01 16 4 Electrical Crane Inspector (Designated to a single person per inspection)
NCC-EC1-01 4
5 Crane Mechanic NCC-CM-01 24 6 Mechanical Crane Inspector (Designated to a single person per inspection)
NCC-MCI-01 4
7 Rigging Gear Inspection NCC-RGI-04 4 8 Load Test Director NCC-LTD-02 16
File details come from the government source that posted it. Updated .