PWC Gate details.pdf

This is a technical specification document for gate installation at the Waianae Japanese Cemetery project in Hawaii. The document details the design and installation requirements for a perimeter access gate system that will serve as the primary entrance control point for the cemetery. The specifications outline gate dimensions of 12 feet wide by 5 feet high, with requirements for heavy-duty aluminum construction capable of withstanding coastal environmental conditions. The gate must include dual swing panels with self-closing mechanisms, integrated locking hardware, and weatherproof hinges rated for saltwater environments. Installation requirements specify concrete footings with proper drainage provisions, and the gate hardware must comply with ADA accessibility standards to ensure smooth operation for all users. The specifications reference compatibility with the existing chain link fencing perimeter installation and require finishing with marine-grade coatings to protect against corrosion in the coastal Hawaii location.

The document establishes material performance standards requiring all gate components to resist rust and degradation from salt spray exposure typical of the Waianae area. Hardware specifications include stainless steel or hot-dipped galvanized fasteners, and all moving parts must be rated for a minimum of 50,000 operational cycles. The gate installation must include proper alignment and leveling procedures with allowable tolerances of no more than 1/4 inch variation. The specifications require that gate operation be tested and certified functional before project completion, with documentation provided to the project owner. Cost implications are driven by the heavy-duty construction standards and marine-grade material requirements necessary for long-term durability in the coastal cemetery environment.