Purchase Description (W80RA6-14-26C) New.pdf

103 KB Posted

Attached to
RPM4-A70M
Solicitation number
PANRSA-26-P-0000-036190
Issued by

About this file

Written by GovTribe AI ·

This is a Purchase Description for the procurement of Reference Pressure Monitors by the U.S. Army Test, Measurement and Diagnostic Equipment Activity (USATA).

USATA requires the procurement of three (3) Model RPM4-A70M Reference Pressure Monitors to serve as backup equipment for the pneumatic pressure side of pressure laboratories located at TSC Anniston, TSC Fort Campbell, and TSC Fort Eustis. The current calibration operations utilize Druck PACE1000 and external sensor IDOS equipment with no backup capability during calibration cycles. The Fluke RPM4-A70M is specified as a high-end pneumatic pressure monitor suitable for high-precision pressure calibration applications, with a measurement range up to 10,000 psi and accuracy of 0.01% of reading. The equipment specifications include RPM4-Base Pressure Monitor, RPM4-HI-A70MS configuration with 70 MPA absolute gas range (standard), RPM4-UOM-US nominal ranges in US units of measure, MIL-STD-129 labeling, MIL-STD M130 labeling with Unique Identification (UID), and shipping and handling. Delivery is required to Enterprise Support Division (ESD) at U.S. Army TMDE Activity, Building 5435, Redstone Arsenal, AL 35898, Attention: Simplice Gbedie.

View the file

Other files

File Type Posted
Reference Pressure Monitor RFQ.docx DOCX document
MFR for Reference Pressure Monitor_redacted.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Purchase Description Procurement of Reference Pressure Monitor

The U.S. Army Test, Measurement and Diagnostic Equipment Activity (USATA) have a requirement to procure three (3) Model RPM4-A70M Reference Pressure Monitor to provide for a back-up to the pneumatic pressure side of the pressure laboratories.

Currently calibration is being performed at the three laboratories (including TSC Anniston, TSC Fort Campbell, and TSC Fort Eustis) using the Druck PACE1000, and external sensor IDOS with no backup when these are due for calibration. The Fluke Reference Pressure Monitor (RPM4 A70M) is a high pneumatic pressure monitor well-suited for a wide variety of high-end pressure calibration (including a workload of several pressure gauges, transducers, transmitters of varied accuracy), testing and measurement applications with a range of up to 10,000 psi and accuracy of 0.01% of reading. The equipment shall be delivered to Enterprise Support Division (ESD) at Redstone Arsenal, AL. The RPM4-A70M Reference Pressure Monitor shall include the following specifications or equivalent (if not brand name):

1.0 Requirements:

Model Description Quantity

RPM4-A70M Reference Pressure Monitor Qty: 3 RPM4-Base Pressure Monitor RPM4-HI-A70MS, HI RPT, 70 MPA Absolute Gas (Standard) RPM4-UOM-US, Nominal Ranges in US Units of Measure

MIL-STD-129 Label MIL-STD M130 Label w/UID Shipping & Handling

2.0 Delivery Requirements

Shipping Address: U.S. Army TMDE Activity, Attn: Simplice Gbedie, Building 5435, Redstone Arsenal, AL 35898

Purchase Description
1.0 Requirements:
2.0 Delivery Requirements

File details come from the government source that posted it. Updated .