Purchase Description (W80RA6-14-26C) New.pdf
PDF 103 KB Posted
- Attached to
- Model RPM4-A70M Reference Pressure Monitor
- Solicitation number
- PANRSA-25-P-0000-036190
About this file
This is a Purchase Description document for the U.S. Army Test, Measurement and Diagnostic Equipment Activity (USATA) procurement of reference pressure monitoring equipment.
USATA requires the procurement of three (3) Fluke Model RPM4-A70M Reference Pressure Monitors to serve as backup equipment for the pneumatic pressure side of pressure laboratories at three locations: TSC Anniston, TSC Fort Campbell, and TSC Fort Eustis. The current calibration setup uses Druck PACE1000 equipment with external IDOS sensors but lacks backup capability during calibration downtime. The RPM4-A70M is specified for high-end pressure calibration applications with a range up to 10,000 psi and accuracy of 0.01% of reading, suitable for calibrating pressure gauges, transducers, and transmitters of varied accuracy levels. Each unit shall include the RPM4-Base Pressure Monitor, RPM4-HI-A70MS high range readout (70 MPA absolute gas standard), RPM4-UOM-US nominal ranges in US units of measure, MIL-STD-129 labeling, MIL-STD M130 labeling with Unique Identification (UID), and shipping and handling. Delivery is required to Enterprise Support Division (ESD) at Redstone Arsenal, AL, attention Simplice Gbedie, Building 5435, Redstone Arsenal, AL 35898. The document does not specify response dates, award dates, pricing information, or contract vehicle type.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Request for Information (W80RA6-14-26C)_SAM.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Purchase Description Procurement of Reference Pressure Monitor
The U.S. Army Test, Measurement and Diagnostic Equipment Activity (USATA) have a requirement to procure three (3) Model RPM4-A70M Reference Pressure Monitor to provide for a back-up to the pneumatic pressure side of the pressure laboratories.
Currently calibration is being performed at the three laboratories (including TSC Anniston, TSC Fort Campbell, and TSC Fort Eustis) using the Druck PACE1000, and external sensor IDOS with no backup when these are due for calibration. The Fluke Reference Pressure Monitor (RPM4 A70M) is a high pneumatic pressure monitor well-suited for a wide variety of high-end pressure calibration (including a workload of several pressure gauges, transducers, transmitters of varied accuracy), testing and measurement applications with a range of up to 10,000 psi and accuracy of 0.01% of reading. The equipment shall be delivered to Enterprise Support Division (ESD) at Redstone Arsenal, AL. The RPM4-A70M Reference Pressure Monitor shall include the following specifications or equivalent (if not brand name):
1.0 Requirements:
Model Description Quantity
RPM4-A70M Reference Pressure Monitor Qty: 3 RPM4-Base Pressure Monitor RPM4-HI-A70MS, HI RPT, 70 MPA Absolute Gas (Standard) RPM4-UOM-US, Nominal Ranges in US Units of Measure
MIL-STD-129 Label MIL-STD M130 Label w/UID Shipping & Handling
2.0 Delivery Requirements
Shipping Address: U.S. Army TMDE Activity, Attn: Simplice Gbedie, Building 5435, Redstone Arsenal, AL 35898
| Purchase Description |
| 1.0 Requirements: |
| 2.0 Delivery Requirements |
File details come from the government source that posted it. Updated .