PUMP PERFORMANCE TEST WORKSHEET.pdf
PDF 114 KB Posted
- Solicitation number
- W911S725QA002
About this file
The document is a Pump Performance Test Worksheet from the National Fire Protection Association (NFPA) Standard 1910, designed to record comprehensive testing data for emergency vehicle fire pumps. The form captures detailed technical specifications and performance metrics, including vehicle identification details, pump rated capacity, test site conditions, and results across multiple test scenarios such as 20-minute capacity test, 5-minute overload test, and 10-minute 200 psi tests. The worksheet allows for recording critical measurements like engine and pump RPMs, pressures, temperatures, oil pressure, voltage, and provides space for documenting test conditions, test personnel, and authorized representative signatures.
The form is specifically associated with the US Army Fort Leonard Wood Fire Department's solicitation (W911S725QA002) for annual mobile fire emergency vehicle inspections, which requires detailed testing of their fleet consisting of 8 fire trucks from manufacturers including Pierce, Ferrara, Oshkosh, KME International, Ford, and E-One. The inspection must adhere to NFPA 1910 standards, with tests to be conducted on-site at the military installation, requiring valid identification for all personnel involved. The worksheet serves as a standardized template for documenting the comprehensive technical assessment of each emergency vehicle's pump performance and operational capabilities.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PUMP PERFORMANCE TEST
IAW NFPA1910
© 2024 National Fire Protection Association
Emergency vehicle number or designation ___________
Manufacturer __________________________________
Serial no. _____________________________________
Engine make __________________________________
Pump make ___________________________________
Year manufactured _____________________________
Model _______________________________________
Vehicle identification no. _________________________
Model _______________________________________
Model _______________________________________
Pump rated capacity __________________ (gpm) (L/min) at _______________(psi) (kPa)
Speed check taken from _________________________ Ratio to engine ________________________________
Test site location ___________________________________________________________________________________
Tests performed from __ Draft __ Hydrant
Suction hose size _____________________ (in.) (mm) Length _________________________(ft) (m)
At start of tests At end of tests
Atmospheric pressure
Air Temperature
Water temperature
Elevation of test site
Lift
Governed engine speed ___________________________ Actual maximum engine speed ____________________
Verify operation of pump shift indicator __________________________________________________________________
Verify operation of pump engine control interlock at pump operator’s panel _____________________________________
Maximum vacuum attained _________________________ Vacuum drop in 5 minutes ________________________
Time to prime pump ________________________________________________________________________________
Pressure control device test:
Rise while pumping capacity at 150psi ________________________________________________________________
Rise while pumping capacity at 90 psi ________________________________________________________________
Rise while pumping at 50 percent capacity at 250 psi ____________________________________________________
Intake relief valve test results _________________________________________________________________________
Tank to pump water flow test ___________________ (gpm) (L/min)
Gauge accuracy _____________________________ Flowmeter accuracy ___________________________________
Pump Test Results Capacity test Overload test 200 psi test 250 psi test Duration Average nozzle pressure Corrected pressure Gallons per minute Average pump pressure rpm-engine Rpm-pump
Comments
PUMP PERFORMANCE TEST
IAW NFPA1910
© 2024 National Fire Protection Association
20-Minute Capacity Test Layout _____________________________ Nozzle size _______ Position of transfer valve _______________
Pump Intake Pump Discharge
Time
Counter (if used) rpm
Tach
Engine temperature
Oil pressure
Voltage
Automatic Transmission
Temp (if equipped)
Apparatus gauge
Test
Apparatus
Test
Pilot/ flow
5-Minute Overload Test
10-Minute 200 psi Test
10-Minute 200 psi Test
Person conducting the test ___________________________________________________________________________
Representing _____________________________________________________________________________________
Signature _____________________________________________________ Date ___________________________
AHJ representative _____________________________________________ Date ___________________________
File details come from the government source that posted it. Updated .