PDS_Polyester.pdf
PDF 245 KB Posted
- Attached to
- PR7028484 - ISB-FAC, Material For Lahore Roofing
- Solicitation number
- PR7028484
- Issued by
-
Department of State US Embassy Islamabad
View the file
Other files
| File | Type | Posted |
|---|---|---|
| PDS_DynaSHIELD-Flashing-Grade.pdf | ||
| PDS_DynaSHIELD-HP-Primer.pdf | ||
| PDS_DynaSHIELD-Low-Odor-White-Coating.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DESCRIPTION
100% stitchbond Polyester Fabric used as an interply to reinforce other ARC’s DynaSHIELD & HydroSHIELD brand-name products.
RECOMMENDED USES
Use 100% stitchbond Polyester on seams, flashings and penetrations on metal, EPDM, Hypalon, single-ply membranes, TPO, PVC, BUR and modified Bitumen.
APPLICATION
Surfaces to receive this product must be clean, dry, and sound. Rusted surfaces must by primed with ARC’s
DynaSHIELD Rust Inhibitor. Polyester is usually embedded into wet ARC products. However; when installing the
Retro-Ply 10 System, pour DynaSHIELD TC 2000 or
HydroSHIELD TC 2000 over top of dry polyester and disperse with a broom. Check all polyester application for complete sealant saturation. Overlap seams by 4 inches and end of roll by 6 inches.
BENEFITS
Long Lasting
Pliable
Non-Hazardous
User Friendly
TECHNICAL DATA
ROLL SIZE: 2” x 300’ 4” x 300’
6” x 300’ 12“ x 300‘
20” x 300’ 40” x 300’
WEIGHT: 3 oz. per square yard
TENSILE: 59.2 lbs ASTM D-1682-64
ELONGATION: 45% ASTM D-1682
TEAR: 11 lbs ASTM D-2262-83 (tongue)
ABRASION: Passed 12,000 cycles ASTM D-3597-89
MILDEW & ROT: Excellent Resistance to both
All data above is approximate and subject to change without notice.
Architectural Roof Coatings | 4821 Grisham Drive | Rowlett, Texas 75088 | architecturalroofcoat.com
REINFORCEMENT
FABRIC: POLYESTERPRODUCT DATA SHEET
DISTRIBUTED BY:
There is no warranty given, expressed or implied, through the values or statements made here, nor are there any assertions that the product purchased has been individually tested to conform to these standards. Testing is performed on a random basis by our in house and independent third party labs in order to obtain approval and/or classification. Acceptance, purchase and selection of these products are the sole responsibility of the buyer, buyer’s agent, or the buyer’s customer. ARC assumes no responsibility for coverage, performance, or injuries resulting from use. Liability , if any, is limited to replacement of the product. NO OTHER GUARANTY OR WARRANTY OF ANY KIND IS MADE BY ROOF COATINGS, INC. OR ITS SUBSIDIARIES, EXPRESSED OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
File details come from the government source that posted it.