PDS_DynaSHIELD-HP-Primer.pdf

There is no warranty given, expressed or implied, through the values or statements made here, nor are there any assertions that the product purchased has been individually tested to conform to these standards. Testing is performed on a random basis by our in house and independent third party labs in order to obtain approval and/or classification. Acceptance, purchase and selection of these products are the sole responsibility of the buyer, buyer’s agent, or the buyer’s customer. ARC assumes no responsibility for coverage, performance, or injuries resulting from use. Liability , if any, is limited to replacement of the product. NO OTHER GUARANTY OR WARRANTY OF ANY KIND IS MADE BY ROOF COATINGS, INC. OR ITS SUBSIDIARIES, EXPRESSED OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

DESCRIPTION

DynaSHIELD HP Primer is a high-performance primer made of a proprietary blend of polymers. It flashes and enhances surface adhesion for companion products. DynaSHIELD HP

Primer is available in 5 gallon pails, or metal drums.

RECOMMENDED USES

DynaSHIELD HP Primer is primarily used to increase adhesion when products are applied over EPDM, Hypalon, and TPO Roofing Systems.

APPLICATION

Thoroughly mix contents in container before use. Apply at a rate of 1 gallon per 150-200 square feet. DynaSHIELD HP

Primer should be applied evenly at a surface temperature of 30° F or greater. It can be applied with a roller, brush, squeegee, or sprayer.

BENEFITS

Easy To Apply

Cleans Easily

3 Year Shelf Life

Freeze Resistant

Promotes Adhesion

TECHNICAL DATA

TENSILE: 3500 psi ASTM D-2370

ELONGATION: 80 - 100% ASTM D-2370

COLOR: Semi-Transparent

PERMEABILITY: Non-breathing ASTM E-1653

SOLIDS: Weight 8.17% +/- 2% ASTM D-1353

SOLIDS: Volume 11.21% +/- 2% ASTM D-2697

WEIGHT: 7 lbs. per gallon +/- 2%

VISCOSITY: 400 - 1100 cps.

ABRASION: Passed ASTM D-986

HARDNESS: 70 Shore A ASTM D-2240

STORAGE: 3 years unopened at 40° F - 100° F

DRY TIME: 30 min. at 75° F and a thickness of 8 wet mils

FULL CURE: 24 - 72 hours depending on humidity, air movement, and temperature

CLEAN-UP: Biodegradable citrus cleaning products or

ARC’s Cleaning Solvent for oil-based products

ADHESION: Pass ASTM D-3359

PIGMENT: None

VOC: <775 grams per liter

THIS PRODUCT IS FLAMMABLE

Avoid breathing fumes and prolonged contact with skin. Do not ingest. Keep containers covered when not in use. When using, provide proper ventilation. Dispose of product and container in accordance with local disposal codes.

Architectural Roof Coatings | 4821 Grisham Drive | Rowlett, Texas 75088 | architecturalroofcoat.com

DynaSHIELD

HP PRIMERPRODUCT DATA SHEET

DISTRIBUTED BY: