PDS_DynaSHIELD-Flashing-Grade.pdf

There is no warranty given, expressed or implied, through the values or statements made here, nor are there any assertions that the product purchased has been individually tested to conform to these standards. Testing is performed on a random basis by our in house and independent third party labs in order to obtain approval and/or classification. Acceptance, purchase and selection of these products are the sole responsibility of the buyer, buyer’s agent, or the buyer’s customer. ARC assumes no responsibility for coverage, performance, or injuries resulting from use. Liability , if any, is limited to replacement of the product. NO OTHER GUARANTY OR WARRANTY OF ANY KIND IS MADE BY ROOF COATINGS, INC. OR ITS SUBSIDIARIES, EXPRESSED OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

DESCRIPTION

DynaSHIELD Flashing Grade is a proprietary blend of polymers. It is an elastomeric cement that bonds to metal, wood and other construction products. It is useful for both horizontal and vertical surfaces, and it is an excellent sealant on transitional joints. This product will bridge gaps up to 1/2” in width.

RECOMMENDED USES

DynaSHIELD Flashing Grade may be applied to metal, stainless steel, thermoplastic roofing materials, and masonry products. It bonds to wood, steel, fiberglass, aluminum and most plastics. It may also be used with reinforcement textiles, fiberglass, and polyester.

APPLICATION

Apply evenly at a surface temperature of 30° F or greater.

Apply on a clean, dry surface. Use protective hand gloves and trowel or stiff brush when applying.

BENEFITS

Easy to Apply Cleans Easily

Long Shelf Life Freeze Resistant

Year Round Usage Stain Resistant

Fast-Curing Single Component

Can Be Tinted

TECHNICAL DATA

TENSILE: 1500 psi ASTM D-2370

ELONGATION: 400% ASTM D-2370

COLOR: White

PERMEABILITY: Non-breathing ASTM E-1653

SOLIDS: Weight 58% +/- 2% ASTM D-1353

SOLIDS: Volume 46% +/- 2% ASTM D-2697

WEIGHT: 9.32 lbs. per gallon +/- 2%

VISCOSITY: Trowel Grade 150,000 - 250,000 cps.

ABRASION: Passed ASTM D-986

HARDNESS: 68 Shore A ASTM D-2240

STORAGE: 3 years unopened at 50° F - 80° F

DRY TIME: 1 hr. at 75° F and a thickness of 16 wet mils

FULL CURE: 24 - 72 hours depending on humidity, air movement, and temperature

CLEAN-UP: Biodegradable citrus cleaning products or

ARC’s Cleaning Solvent for oil-based products

ADHESION: Pass ASTM D-3359

PIGMENT: Titanium

VOC: <466 grams per liter

Avoid breathing fumes and prolonged contact with skin. Do not ingest.

Keep containers covered when not in use. When using, provide proper ventilation. Dispose of product and container in accordance with local disposal codes.

Architectural Roof Coatings | 4821 Grisham Drive | Rowlett, Texas 75088 | architecturalroofcoat.com

DynaSHIELD

FLASHING GRADEPRODUCT DATA SHEET

DISTRIBUTED BY: