PID PACKAGING AND MARKINGS.pdf

*** LTC PID Packaging Consolidated Text ***

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM

DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:016595620

KIT, BATTLE DAMAGE Remove: IAW REFERENCE DRAWING NR 59678 0730D0006 REVISION NR DTD 06/12/2016 PART PIECE NUMBER: Add: IAW REFERENCE DRAWING NR 59678 0730D0006 REVISION NR DTD 12/06/2016 PART PIECE NUMBER: Remove:

IAW REFERENCE DRAWING NR 59678 0545A0003 REVISION NR DTD 12/06/2016 PART

PIECE NUMBER: Warranty contact information is included IAW drawing 0545A0004. Drawing 0545D1025 was removed from the kit in error. Please disregard any note requiring it to be removed. Item 0545D1006 shall be made from 0545D1025 and 0545D1006 shall remain in the kit. The following Item Description, Drawing(s) and/or Specification(s) represent minimum Government requirements and are applicable to this Procurement. National Stock Number (NSN): 2590‐01‐659‐5620 Item: BATTLEFIELD DAMAGE ASSESSMENT & REPAIR (BDAR) KIT In accordance with: Army TDPL (Technical Data Package List) 0545A0000:59678 dated 07 April 2017. With the following exceptions: Army Drawing 0545A0004: ‐Section 3‐C, item 4 is referencing the manufacturer's part number, not the part number of the drawing. The CAGE and Part Number listed for item number 29 on 0545D1004 are incorrect. An alternate source of supply has been found. use CAGE:

0Y3H3, PN: 31823, NSN: 5305‐01‐571‐7783 in place of item number 29 on 0545D1004. Army drawing 0744A0001 ,, ‐Sheet 1, Approved Sources Table, add United Resin Corporation, Fastweld Puttystick Adhesive, T‐700. Army drawing 0545A0000 ‐Zone C4, Delete Note 6 in its entirety and replace with the following: "6. The contractor shall provide a laminated card in the interior pocket of the tool bag that provides the website to download the Smart Book. The card shall read as follows: BDAR Smart Book available for download by visiting the following link: https://www.milsu ite.mil/book/community/spaces/sustainnet/ordnance_community ,, /maintenance_management" ‐Zone B2‐B3, Bill of Materials Table, Item 6, remove Part No. "TBD" and replace with "See Note 6". ,, Army drawing 0545D0000 ‐Zone B2‐3, remove item or find no. 1. ,, Army drawing 0545D1001 ‐Zone B3‐4, add the following row to the table: 7,,1,,59678,, 0744A1000,,RUBBER REPAIR COMPOUND Army drawing 0545D1003 ‐ Zone D4, Note 2, remove "0545D2000" and replace with "0545D2001" Army drawing 0744A3000 ‐ Sheet 1, Zone C3‐C4, Approved sources table: 1.Part number 0744A3000‐1, remove vendor part number "SS‐KTPX" and replace with "SS‐KTPXB" 2.Part number 0744A3000‐2, remove vendor part number "KTBXB" and replace with "SS‐KTBXB" 3.Under "Name & Address" remove "16226 CIRCLE DR" and replace with "16286 CIRCLE DR" ‐Sheet 1, Zone C2‐D3, Specifications table, under "Special Features", add "All metal components shall be non‐reflective" Army drawing 0730D0001: ‐APPROVED SOURCE OF SUPPLY PARKER‐HANNIFIN CAGE (18925) PN 5HBU‐S Army Drawing DWG

0730D0004: ‐APPROVED SOURCE OF SUPPLY PARKER‐HANNIFIN CAGE(18925)PN

10HBU‐S Army Drawing 05450000: ‐Maximum height of 11in. ILO 10 in is acceptable. Understand that the bag as a whole is not entirely waterproof given the zipper, however, the fabric is considered waterproof. Army drawing 0545A0004 ‐BLOCK 2. NOTE 3. TOLL FREE PHONE NUMBER FOR WARRANTY SERVICE CALLS: Contractor is required to provide contact information to use through the life of the contract. Although the drawing mentions a toll free number, any contact number that is valid is sufficient. Do not include the DSN for the ESA. Army Drawing 05450000: ‐Maximum height of 11in. ILO 10 in is acceptable. Understand that the bag as a whole is not entirely waterproof given the zipper, however, the fabric is considered waterproof. Army Drawing 0545D1025 ‐Aluminum Plate manufactured by ARTUS CORP (96013) is acceptable. ARTUS CORP is the same source that is used by the approved source on DWG 0545D1025. The documentation included to justify this shall be maintained in the file for future reference. Exception to all drawings that list CAGE 0J426 as the approved/suggested source: CAGE 3BUS5 is acceptable ILO CAGE 0J426 Contractor shall comply with all the exceptions to technical data package listed on SQAP016595620.

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CA070

REFERENCE NUMBER:IKT02

REFERENCE NUMBER:CS147

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RD002

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CS308

IAW BASIC DRAWING NR 59678 0545A0000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1045

REVISION NR DTD 12/06/2016

IAW REFERENCE DRAWING NR 59678 0545D2004

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1003

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1038

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D3008

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D3006

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0727B1005

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0727B1006

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0727B1007

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0727B1004

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730E0002

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730E0001

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730E0003

IAW REFERENCE DRAWING NR 59678 0730D3004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D1004

REVISION NR XO DTD 05/26/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D1003

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D1002

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D2013

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1029

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1028

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D3009

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D2001

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D2000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1002

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1030

REVISION NR DTD 12/06/2016

IAW REFERENCE DRAWING NR 59678 0545D1040

IAW REFERENCE DRAWING NR 59678 0545D1041

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1037

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0734G1003

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1025

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0737A1000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0737A1002

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545A0004

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D2006

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1046

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1047

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0734G1004

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0734G1011

IAW REFERENCE DRAWING NR 59678 0734G1010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0734G0001

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D2004

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1004

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1006

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1051

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0743A1000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0734G1009

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0734G1008

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545A0001

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1049

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1007

REVISION NR DTD 12/06/2016

IAW REFERENCE DRAWING NR 59678 0744A3000

IAW REFERENCE DRAWING NR 59678 0545B0000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D0000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1013

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1014

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1015

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1016

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1011

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1012

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D0001

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1001

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1009

IAW REFERENCE DRAWING NR 59678 0545D1010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1017

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1018

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1019

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1020

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1021

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1022

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1023

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1024

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1026

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1027

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0745A0000

REVISION NR DTD 12/06/2016

IAW REFERENCE DRAWING NR 59687 0545D1043

IAW REFERENCE DRAWING NR 59678 0545D1031

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1032

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1033

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1034

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1035

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D2009

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1036

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D2010

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D2007

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D2008

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D2011

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D0003

IAW REFERENCE DRAWING NR 59678 0545D3000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0727B1000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0727B1001

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0727B1002

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0727B1003

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D0000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D0001

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D0002

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1050

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1039

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1042

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545D1048

REVISION NR DTD 12/06/2016

IAW REFERENCE DRAWING NR 59678 0545D2002

IAW REFERENCE DRAWING NR 59678 0545D2005

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D0004

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D0005

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D0006

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D0007

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D0008

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D0009

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D0010

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D0011

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D1000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D1001

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D2000

IAW REFERENCE DRAWING NR 59678 0730D2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D2002

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D2003

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D2005

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D3000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D3001

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D3002

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D3003

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D3005

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D3010

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D3007

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D3011

REVISION NR DTD 12/06/2016

IAW REFERENCE DRAWING NR 59678 0730D3012

IAW REFERENCE DRAWING NR 59678 0730D3013

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730D3014

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0730E0000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0731B0002

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0731D1000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0731G0001

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0731G0002

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0732B0002

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545A0000

REVISION NR DTD 04/13/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0545A0000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0737A1003

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0742D0000

IAW REFERENCE DRAWING NR 59678 0742E0000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0733A0003

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0743A0000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0733E1000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0734D0000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0743B0001

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0743B0002

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0743B0003

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0734G0000

REVISION NR DTD 06/08/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0743C0000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0744A0000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0744A0001

REVISION NR DTD 12/06/2016

IAW REFERENCE DRAWING NR 59678 0734G1000

IAW REFERENCE DRAWING NR 59678 0744A1000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0744A1001

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0734G1001

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0744A1002

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0744A2000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0734G1002

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0734G2000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0744B0000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0734G2001

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0744C0000

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0734G1005

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0737A1001

IAW REFERENCE DRAWING NR 59678 0734G1006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 59678 0734G1007

REVISION NR DTD 12/06/2016

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAP016595620

REVISION NR B DTD 10/16/2018

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:ZZ ‐ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PACKAGING UPDATES ‐

REPLACE WITH ALTERNATIVE PACKAGING (IE RECLOSABLE PLASTIC BAG)

REMOVE THIS DWG AND ITEM FROM THE KIT ENTIRELY (PER SQAP

NSN: 2590‐01‐659‐5620

PRON: CFL1730485

ITEM: BATTLEFIELD DAMAGE ASSESSMENT & REPAIR (BDAR) KIT

PART/ARMY DWG: 0545A0000

NOMEN: BATTLEFIELD DAMAGE ASSESSMENT & REPAIR (BDAR) KITPRON(S):

CFL1730485

0545A0000: 59678 dated 07 April 2017 With the following exceptions:

Army drawing 0744A0001 dated 06 DEC 2016:

·,,Sheet 1, Approved Sources Table, add United Resin Corporation, Fastweld Puttystick Adhesive, T‐700.

Specifications and Standards referenced in the above cited applicable document(s) (drawings, part lists, and specifications) shall be the effective issue or revision in effect as listed in the Department of Defense ASSIST database, http://quicksearch.dla.mil/, as of 7 April 2017.

PRESERVATION: COMMERCIAL

LEVEL OF PACKING: COMMERCIAL

QUANTITY PER UNIT PACKAGE:‐001‐

SUPPLEMENTAL INSTRUCTIONS:

All items that make up the BDAR Kit shall remain in their original commercial packaging or be packaged in some type of unit packaging (bag, box, wrap, etc.) and then stored in the BDAR Tool Bag. The fully loaded BDAR Kit shall than be packaged in a fiberboard container built in accordance with (IAW) ASTM D5118/D5118M, RSC, W5c. Seal each fiberboard container IAW ASTM D1974/D1974M, Sealing Method B. The fiberboard container will serve as the unit and shipping container.

Items susceptible to corrosion shall be protected with the use of Volatile Corrosion Inhibitors (VCI) or Desiccant packs. Where VCI is used, electric or battery operated devices, batteries, natural or synthetic rubber, optical systems, or precision moving parts shall be placed in a heat sealed bag to prevent exposure to vapors. Desiccant and VCI shall not be present in the same pack.

Manuals, parts lists, and warranty information shall be packed in sealed water proof packaging that is reusable, i.e. zip lock bag. Packing Lists shall be sealed in water‐resistant envelopes and secured to the exterior of the load or crate in the most protected location.

Rubber repair compound (0744A1000) is required on the assembly drawing 0545d1001. It should be provided in the sealed bag for item 0545d1001

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW‐ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON‐ACCEPTED SUPPLIES

REFERENCE NUMBER CA070

FULL AND OPEN COMPETITION APPLY

REFERENCE NUMBER IKT02

KIT QUALITY PROVISION

1. THIS REQUIREMENT APPLIES TO MATERIAL SUPPLIED

TO THE GOVERNMENT AS A KIT.

2. THE CONTRACTOR SHALL COMPLY WITH ALL

APPLICABLE QUALIFIED PRODUCTS LIST (QPL)

REQUIREMENTS FOR THE KIT COMPONENTS BEING

SUPPLIED.

3. THE CONTRACTOR SHALL INCORPORATE A SYSTEM FOR

OBTAINING, HANDLING AND SUPPLYING ORIGINAL

EQUIPMENT MANUFACTURER (OEM) CERTIFIED PARTS

INTO ALL CONTRACTUAL DOCUMENTS ENTERED INTO WITH

ITS VENDORS.

4. THE CONTRACTOR SHALL IMPLEMENT AN INSPECTION

SYSTEM, WHICH WILL INCLUDE INSPECTION OF ALL

PARTS UPON RECEIPT TO ENSURE CONFORMANCE WITH

REQUIREMENTS AND TO ENSURE THAT THEY ARE NOT

DAMAGED.

5. THE CONTRACTOR SHALL MAINTAIN A SYSTEM OR

PROCESS THAT WILL ENSURE TRACEABILITY OF ALL

PARTS, THROUGH AN UNBROKEN SUPPLY CHAIN, TO THE

MANUFACTURER.

6. THE CONTRACTOR'S INSPECTION SYSTEM AND

PROCEDURE FOR ENSURING PARTS TRACEABILITY SHALL

BE AVAILABLE FOR REVIEW BY THE GOVERNMENT AT THE

REQUEST OF THE CONTRACTING OFFICER.

7. THE CONTRACTOR SHALL FURNISH ONLY THOSE PARTS

THAT ARE KNOWN TO BE ACCEPTABLE TO THE

GOVERNMENT, I.E. SOLE SOURCE PARTS, APPROVED

SOURCE PARTS, ACCEPTABLE SOURCE PARTS, AS

REFLECTED IN THE GOVERNMENT'S CONTRACT

TECHNICAL DATA FILE (CTDF).

8. UNLESS OTHERWISE APPROVED IN ADVANCE BY THE

CONTRACTING OFFICER, THE CONTRACTOR SHALL SUPPLY

ONLY NEW AND UNUSED PARTS THAT ARE NOT

GOVERNMENT SURPLUS PARTS.

REFERENCE NUMBER CS147

"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST CONFORM TO SOURCE CONTROL DRAWING. BY

SUBMITTING AN OFFER, THE OFFEROR AGREES TO

PROVIDE SOURCE CONTROLLED COMPONENTS FROM

SOURCES APPROVED ON THE APPLICABLE SOURCE

CONTROL DRAWING."

REFERENCE NUMBER RQ001

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON‐MANUFACTURERS)

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT ‐ ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL‐STD‐1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL‐STD‐1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL‐STD‐105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON‐CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER CS308

**IF** AN ITEM CONTAINS HAZARDOUS MATERIAL(S),

A MATERIAL SAFETY DATA SHEET (MSDS) AND THE

SUBMISSION OF HAZARD WARNING LABELS SHALL BE

PROVIDED TO DSCC‐VSS AT THE TIME OF THE QUOTE.

THE MSDS MUST BE COMPLETED IN IT'S ENTIRETY IN

ACCORDANCE WITH FED‐STD‐313 (MATERIAL SAFETY

DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR

HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT

ACTIVITIES).

OFFEROR SHALL DETERMINE IF THEIR PRODUCT MEETS

THE DEFINITION OF "HAZARDOUS MATERIAL" AS

DEFINED UNDER THE LATEST VERSION OF FED‐STD‐313.

THE OFFEROR MUST LIST ANY HAZARDOUS MATERIAL AS

DEFINED IN ACCORDANCE WITH FED‐STD‐313 AND

FAR 52.223‐3. **IF** ITEM IS NOT CLASSIFIED

AS A HAZARDOUS MATERIAL, IN ACCORDANCE WITH

FED‐STD‐313, THE OFFEROR SHALL DISREGARD THE

REQUEST FOR DOCUMENTATION SUBMISSION.