PACKAGING TECH BLUE MATERNITY SKIRT.docx
DOCX document 15 KB Posted
- Attached to
- Maternity Blue , Skirts and Slacks Federal contract opportunity
- Solicitation number
- SPE1C123Q0365
About this file
This document outlines packaging and shipping requirements for maternity blue skirts and slacks. The supplies must be packed and marked according to military standards, with pallets constructed as specified. Wood packaging materials including pallets and dunnage must be heat treated or kiln dried and properly marked in compliance with international phytosanitary regulations. Each palletized shipment shall contain only one national stock number and be under the stated size limitations, with loads clearly identifying included part numbers. The related solicitation is for maternity blue skirts and slacks to be procured by the Defense Logistics Agency Troop Support Clothing and Textiles.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| ATTACH_Spec_Changes_FNS_PD_96_11.rtf | RTF text file | |
| SF18_SPE1C123Q03650002 (1).PDF | ||
| 96-11.pdf | ||
| ATTACH_Spec_Changes_A_A_59531.doc | DOC document | |
| ATTACH_NSNs.xls | XLS spreadsheet | |
| AA59531.pdf | ||
| SF30_SPE1C123Q03650002.PDF | ||
| SF30_SPE1C123Q03650001.PDF | ||
| Blue Maternity Slacks Tech Data.docx | DOCX document | |
| Blue maternity skirt tech.docx | DOCX document | |
| SF18_SPE1C123Q0365.PDF | ||
| Copy of Copy of MATERNITY SKIRTS SLACKS.xlsx | XLSX spreadsheet | |
| A_A_59531_SQ_INCHES.pdf | ||
| PD9611_SQ_INCHES.pdf |
Show all 14
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PRESS/PACK TO ASTM-D-3951; CARTON QTY 30
CARTON SHALL CONFORM TO STYLE RSC-L,GRADE
275, SW WITH DW LINER. POLY BAGS SHALL BE
TUCK-IN OR REVERSE-FLAP TYPE; MARKING IAW
MIL-STD-129 & MIL-HDBK-129
MIL-STD-129R w/CHANGE 2 - DEPARTMENT OF DEFENSE STANDARD PRACTICE
MILITARY MARKING FOR SHIPMENT AND STORAGE
DATED: 27 SEPTEMBER 2019
INTERIM CHANGES:
OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS
IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:
THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE
MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA
TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.
IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING
CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS
OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER
TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE
STENCILED, NOT HAND LETTERED, ON THE CONTAINER.
THE GOVERNMENT ASSIGNED UNIVERSAL PRODUCT
CODE (UPC) MUST BE PLACED ON ALL SHIPPING
CARTONS ON WHICH THE NSN APPEARS".
SIGNIFICANT NOTE - "PALLETIZATION IS REQUIRED FOR THESE SUPPLIES".
NOTE: THE FOLLOWING APPLIES TO ALL NON-MANUFACTURED WOOD PACKAGING
MATERIALS:
"All Wood Packaging Material (WPM) acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo, or when wood is being acquired by DLA for future use as packaging material. WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). All WPM shall comply with one of the following official quality control programs:
Heat Treatment (HT) or Kiln Dried Heat Treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/; or
All WPM shall include certification/quality markings in accordance with the ALSC or NWPCA standards, as applicable. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible.
All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government."
PALLET SHALL BE 4 WAY ENTRY, WINGED TYPE. PALLETIZED LOAD DIMENSIONS
SHALL NOT EXCEED 43 INCHES IN LENGTH, 52 INCHES IN WIDTH, AND 54 INCHES
IN HEIGHT (INCLUDING THE PALLET).
THE PALLETIZED LOAD SHALL BE BONDED USING APPROVED COMMERCIAL BONDING
MATERIALS. THE USE OF METAL BANDING, IN SECURING BOXES TO PALLETS, IS
DISCOURAGED. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF
IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE.
PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO
LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN
ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY
BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY
MARKED "SHORT" OR "OVER".
MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.
IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO
APPLIES:
52.247-9012 - REQUIREMENTS FOR TREATEMENT OF WOOD PACKAGING MATERIALS
(WPM) - (JULY 2006)
File details come from the government source that posted it. Updated .