Blue Maternity Slacks Tech Data.docx

SLACKS, MATERNITY

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

ATTACHMENT 1 DEC 2019

1. The following technical data is provided for inclusion to the subject specification to maintain the Marine Corps requirements. These changes are effective immediately on current and future procurements until such time as the document is amended or revised.

a. DELETE: Paragraph 2.1 CLASSIFICATION. The slacks shall be of one type in the following sizes:

Schedule of Sizes Extra Small Small Medium

4-6 8-10

Large 12-14 Extra Large 16-18

REPLACE: Paragraph 2.1 CLASSIFICATION. The slacks shall be one type in the following classes:

Class 1: Green 2243 Class 2: Sky Blue 2319

Schedule of Sizes Extra Small Small Medium

4-6 8-10

Large 12-14 Extra Large 16-18

b. DELETE: Paragraph 3.3.1 Basic Material. The basic material 11 for the slacks shall be a serge, woven with a singles yarn blended of a maximum of 83 percent polyester and a minimum of 17 percent wool fiber (62's U.S. standard of finer), and woven with a 100 percent continuous filament texturized polyester yarn into an end to end, and pick and pick arrangement in both the warp and filling. The weave shall be a 2 up 2 down, right hand twill. The cloth shall be scoured, brushed, sheared, pressed and decated. The cloth shall weigh 10.5-11.0 ounces per linear yard based on a 56 inch width cloth when testing according to ASTM D 2776 Option C after conditioning as directed in ASTM 1775 with a minimum of 65 ends and 55 picks per inch.

The minimum breaking strength shall be 160 pounds of warp and

The minimum breaking strength shall be 160 pounds of warp and 140 pounds filling when tested accordingly to ASTM D 5034 Option G-T or G-E. The cloth shall have a maximum dimensional change of 2.5 percent in both warp and filling direction when testing according to AATCC 135 and minimum tearing strength of 6.0 pounds in both the warp and filling direction when tested Subj:

TECHNICAL DATA FOR PURCHASE DESCRIPTION SLACKS, MATERNITY A-A59531 21 DEC 1999

accordingly to ASTM D 1424. The pH shall be 5.5- 8.5 when tested accordingly to ASTM D 2165. The color of the cloth shall be class 1 or class 2 (as defined in the contract or order) and shall match the standard sample under artificial daylight having a color temperature of 7500 Kevlin and shall be a good approximation to the standard sample under incandescent lamplight at 2800 Kelvin. The cloth shall "good (4)" colorfastness. to wet/dry cleaning, perspiration, light and laundering (after 3 cycles) when tested according to AATCC 132, AATCC 15, AATCC 16 Option A and AATCC 61-3A respectively. The cloth shall show "fair (3)" colorfastness to crocking when testing according to AATCC 8 using the AATCC Chromatic Transference Scale. The cloth shall rate "good" for piling resistance when testing according to ASTM D 2511. Certificates of compliance shall be submitted for all requirements and the government reserves the right to inspect such items to determine the validity of certification

c. DELETE: Paragraph 3.3.2 Knitted Cloth. The cloth for the front stretch panel shall be interlock knit, tubular, stretch type, nylon cloth, Green Shade 2245. The cloth shall weight 6.5 to 8.0 oz/sq yd. when tested according to test method ASTM D 3776 Option C and have a minimum of 30 wales per inch and 35 ounces per inch when test according to test method ASTM D 3887. Samples shall be conditioned as directed in ASTM D 1776.

REPLACE: Paragraph 3.3.2 Knitted cloth. The cloth for the front stretch panel shall be interlock knit, tubular, stretch type, nylon cloth, and the color shall be class 1 or class 2 as specified. The cloth shall weight 6.5 to 8.0 oz/sq yd. when tested according to test method ASTM D 3776 Option C and have a minimum of 30 wales per inch and 35 ounces per inch when test according to test method ASTM D 3887. Samples shall be conditioned as directed in ASTM D 1776.

.ADDITIONAL INFORMATION FOR A‐A‐59531:

PATTERN DATE: 19 APRIL 1996

PAGE 2, PARA. 3.3.1, DELETE LAST SENTENCE IN IT'S ENTIRETY.

PAGE 2, PARA. 3.3.3, DELETE LAST SENTENCE IN IT'S ENTIRETY.

PAGE 3, PARA. 3.4.2 LABEL/TAG, DELETE IN IT'S

ENTIRETY AND SUBSTITUTE THE FOLLOWING:

"LABEL/TAG. EACH ITEM SHALL BE INDIVIDUALLY BAR‐CODED WITH A PAPER TAG FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE BY SCANNER.

THE BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT THE INITIALS "UPC" MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND OR PACKAGED

AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM."

PAGE 4, ADD NEW PARAGRAPH 3.4.3 DSCP EXCLUSIVE

LABEL, EACH SLACK SHALL HAVE A DLA TROOP SUPPORT LABEL. THE DLA TROOP SUPPORT LABEL SHALL BE SEWN TO THE BOTTOM OF THE WAISTBAND OPPOSITE THE SIZE LABEL 1/2 INCH OFF CENTER BACK. (Ref. W2349)

ADDITIONAL INFORMATION FOR COMMERCIAL AQL'S:

AQL'S FOR COMMERCIAL ITEM DESCRIPTIONS (CID'S):

VISUAL ‐ GENERAL INSPECTION LEVEL II, AQL ‐ 1.0 DIMENSIONAL ‐ SPECIAL INSPECTION LEVEL S‐2, AQL ‐ 2.5

ACCEPTABILITY OF LOTS WILL BE DETERMINED BY THE USE

OF "SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES", ANSI/ASQC Z1.4

MIL‐STD‐129R w/CHANGE 2 ‐ DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR SHIPMENT AND STORAGE

DATED: 27 SEPTEMBER 2019

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER. MIL‐STD‐147E w/CHANGE 2

27 JUNE 2019

DEPARTMENT OF DEFENSE STANDARD PRACTICE PALLETIZED UNIT LOADS

DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:

LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR‐CODED WITH A PAPER TAG FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC" MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER HUMAN‐READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG ‐ USE TYPE VII (PRESSURE SENSTIVE LABEL) OF MIL‐DTL‐32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER) OF MIL‐DTL‐32075.

image1.png