P26-118 Big Joe Furnace Parts Loader- Item Description.pdf
PDF 131 KB Posted
- Attached to
- Big Joe Furnace Parts Loader
- Solicitation number
- FA813226Q0046
About this file
This is a Memorandum for Record documenting equipment specifications for a federal procurement by the 76th PMXG at Tinker Air Force Base.
The 76th PMXG is requesting purchase of one Big Joe WS40 Furnace Parts Loader or equivalent for use at Tinker Air Force Base, Oklahoma. The equipment must feature an inverted design with forks wider than the straddle and dual rail guidance systems—one on the floor using 8" outer-diameter horizontal wheels on the left straddle sides, and one on the equipment using 50" outer-diameter horizontal wheels mounted on top of both straddles. The loader must have a 4,000-pound capacity with a minimum 500-pound load at a 54-inch load center. Dimensional specifications include 84-inch fork length with 3" x 3" solid bar construction, outer diameter less than 48 inches, and inner diameter greater than 30 inches between forks. The lowered height must reach approximately 43 inches from the floor with lift height at least 12 inches above the lowered position (60-inch mast acceptable). The straddles must measure 70 inches in length with 40-inch inner diameter and 48-inch outer diameter (4-inch width per straddle leg). All other dimensions may vary to accommodate the specified requirements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| IMAGE P0397.JPG | JPG image | |
| IMAGE P0398.JPG | JPG image | |
| IMAGE P0399.JPG | JPG image | |
| IMAGE P0396.JPG | JPG image | |
| Vendor Questions and Answers 6.29.2026.pdf | ||
| CSS FA813226Q0046 - Big Joe Furnace Parts Loader.PDF |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)
TINKER AIR FORCE BASE OKLAHOMA
22 June 2026
MEMORANDUM FOR RECORD
SUBJECT: Item Description, P26-118 Big Joe Furnace Parts Loader.
1. The 76th PMXG is requesting utilization of funds for the purchase of Big Joe WS40 or Equivalent.
2. The requested equipment item descriptions/specifications are outlined below.
a. Item one - Big Joe WS40 or Equivalent.
(1) BIG JOE WS40
(2) One (1) each
(3) General Requirements:
(a) Inverted design (forks wider than straddle)
(b) Rail guidance (on floor and equipment)
Horizontal wheels on the sides of the left straddle. OD of wheel to OD of wheel is 8” (rail to rail guide is 8.25” on floor)
Equipment has guides for the straddles. Horizontal wheels on top of both straddles for guidance. OD of wheel to OD of wheel is 50”
(4) Capacity:
4,000 lb. Capacity 500 lb. load at 54-inch load center
(5) Dimensional:
Forks
• 84” length
• Lowered height must reach approx. 43” from floor
• Lift height must be at least 12” above the lowered height (60” mast is acceptable)
• 3” x 3” solid bar forks
• OD of forks must be less than 48”
• ID between forks must be greater than 30”
Straddles
• 70” length
• 40” ID, 48” OD (thus, 4” width for each straddle leg)
3. All other dimensions may vary as to meet the other requirements and dimensions listed above.
File details come from the government source that posted it. Updated .