CSS FA813226Q0046 - Big Joe Furnace Parts Loader.PDF
PDF 490 KB Posted
- Attached to
- Big Joe Furnace Parts Loader
- Solicitation number
- FA813226Q0046
About this file
This is a Combined Synopsis/Solicitation (RFQ) for commercial products issued by the Air Force Sustainment Center's Maintenance Contracting Branch at Tinker Air Force Base, Oklahoma. The solicitation is for one Big Joe WS40 Furnace Parts Loader or equivalent, structured as a Firm Fixed Price (FFP) contract. This is a 100% small business set-aside; large businesses are ineligible for award. The NAICS code is 333924.
The Big Joe WS40 must meet specific technical requirements including an inverted design with forks wider than the straddle, rail guidance systems with horizontal wheels on both floor and equipment levels, a 4,000-pound load capacity with a 500-pound load at a 54-inch load center, and precise dimensional specifications including 84-inch fork length, 70-inch straddle length, 3" x 3" solid bar forks, and a lift height of at least 12 inches above the lowered height (60-inch mast acceptable). Quotes are due by July 6, 2026 at 12:00 PM Central Daylight Time and must be submitted via email to Annita Wooten, Contracting Officer. All offerors must be registered in the System for Award Management (SAM) prior to quoting, with active registration required at time of award. Shipping is FOB Destination (Tinker AFB, OK 73145) only, with no separate shipping charges allowed; shipping costs must be included in the quoted price. Quotes must be valid for a minimum of 90 days from submission date. Payment terms are Net 30, with invoices submitted through the Wide Area Workflow (WAWF) application. Award will be based solely on lowest total price, provided all quotations conform to solicitation requirements. Offerors must certify to NAICS 333924 and provide item specifications, technical information, and warranty details with their quotes.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| IMAGE P0397.JPG | JPG image | |
| IMAGE P0398.JPG | JPG image | |
| IMAGE P0399.JPG | JPG image | |
| IMAGE P0396.JPG | JPG image | |
| Vendor Questions and Answers 6.29.2026.pdf | ||
| P26-118 Big Joe Furnace Parts Loader- Item Description.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Combined Synopsis/Solicitation Supply
Solicitation # FA813226Q0046 – Big Joe Furnace Parts Loader Tinker AFB, OK
The Air Force Sustainment Center’s Maintenance Contracting Branch (AFSC/PZIMC, Road A, Bldg 3705, Tinker AFB, OK 73145-3303) anticipates the award of a Firm Fixed Price (FFP) contract for Big Joe Furnace Parts Loader.
This is a combined synopsis/solicitation for commercial products prepared in accordance with RFO FAR part 12.
This announcement constitutes only solicitation. Offers are being requested and a separate written solicitation will not be issued.
This acquisition is a 100% Small Business Set-aside
Large businesses are not eligible for award.
NAICS Code 333924
The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.
DESCRIPTION
CLIN DESCRIPTION/PRODUCT QTY
UNIT
OF
ISSUE
0001 Big Joe WS40 or Equivalent in accordance with (IAW) the Item Description
See below requirements.
a. Item one – Big Joe WS40 or Equivalent.
(1) BIG JOE WS40
(2) One (1) each
(3) General Requirements:
(a) Inverted design (forks wider than straddle)
(b) Rail guidance (on floor and equipment) •Horizontal wheels on the sides of the left straddle. OD of wheel to OD of Wheel is 8” (rail to rail guide is 8.25” on floor) •Equipment has guides for the straddles. Horizontal wheels on top of both straddles for guidance. OD of wheel to OD of wheel is 50”
(4) Capacity:
•4,000 lb. Capacity •500 lb. load at 54-inch load center
(4) Dimensional:
•Forks
• 84” length
• Lowered height must reach approx. 43” from floor
• Lift height must be at least 12” above the lowered height (60” mast is acceptable)
• 3” x 3” solid bar forks
• OD of forks must be less than 48”
• ID between forks must be greater than 30”
• Straddles
• 70” length
• 40” ID, 48” OD (thus, 4” width for each straddle leg)
1 Lot http://www.acquisition.gov/
TERMS, CONDITIONS, PROVISIONS, & CLAUSES
EVALUATION CRITERIA
Issuance of award will be based on one evaluation factor: the lowest total price.
All quotations must conform to the solicitation requirements, to include all stated terms, conditions, representations, and certifications. All items will be evaluated to ensure they conform to the requirements set forth in this solicitation.
QUOTE SUBMISSION INFORMATION
Quotes are due to the point of contact (POC) below By 6 July 2026, 12:00 PM (Noon) Central Daylight Time
Annita Wooten, Contracting Officer (Primary POC) annita.wooten@us.af.mil
All quotes must be good for no less than 90 days after the quote submission date above.
All Offerors must be registered in the System for Award Management (SAM; https://sam.gov/) prior to quoting.
Failure to have an active registration status in SAM by the time of award will make that Offeror ineligible to receive the award with no exceptions.
SHIPPING INFORMATION
Shipping for each item will be FOB Destination only (Tinker AFB, OK 73145). Separate charges for shipping/freight will not be allowed. Please work this into your quoted price.
PAYMENT TERMS
Payment terms will, by default, be Net 30, which means the Government has 30 days to pay you after you submit your invoice. You may offer payment discounts for early payment, but this will not be considered in quote evaluation.
Invoices must be submitted in Wide Area Workflow (WAWF) application, which can be found in the Government's Procurement Integrated Enterprise Environment (PIEE; https://piee.eb.mil/). Payment will be made after the invoice is signed in WAWF and after the item is received and accepted by the Government; do not submit invoices until the item has been delivered/performed.
All quotations must conform to the solicitation requirements, to include all stated terms, conditions, representations, and certifications.
See attached documents for further details https://sam.gov/ https://piee.eb.mil/
PROVISIONS AND CLAUSES
All clauses and provisions can be found on the following websites:
Revolutionary FAR Overhaul Federal Acquisition Regulation (RFO FAR) – https://www.acquisition.gov/far-overhaul
Revolutionary FAR Overhaul Defense Federal Acquisition Regulation Supplement (R-DFARS) – https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html
52.212‐1 ‐‐ Instructions to Offerors – Commercial Products and Commercial Services
As prescribed in RFO 12.205(a)(1), the following addendum is provided for this solicitation and hereby amends all language therein:
1. Quotes in response to this solicitation must be submitted no later than 6 July 2026 / 12:00 PM CDT. Quotes must be submitted via email to Annita Wooten. The Government reserves the right to consider late quotes.
NOTICE TO OFFERORS – SOLICITATION REQUIREMENTS
If you disagree with any of the solicitation requirements (which includes all stated terms, conditions, representations, and certifications), you must inform the Government of your issue with the aforementioned requirements and provide your rationale for disagreement. The Government reserves the right to reject any/all quotes which do not conform to the solicitation requirements
2. All price quotations must be submitted on the Quote Sheet (see last pages of this document), which must be filled out completely.
3. Shipping will be FOB Destination (Tinker AFB, OK 73145) only. Separate charges for shipping/freight will not be allowed. Please work this charge into your quote’s total price.
4. Please provide item specifications/technical information to us. This information must be sufficient for us to determine that each item either fits/does not fit the description of what we’re asking for.
5. We intend to issue the award without interchanges; however, the Government reserves the right to conduct interchanges with the Offeror if later determined by the Contracting Officer to be necessary. The Government may waive informalities and minor irregularities in quotations received; therefore, the Offeror’s initial quotation should be complete and contain the Offeror’s best terms from a price and technical standpoint.
6. Contractor’s must certify to NAICS 333924
Failure to follow all of these instructions may render you ineligible for award.
[End of Provision Addendum]
52.212-4 -- Contract Terms and Conditions – Commercial Products and Commercial Services Clauses/Provisions IAW RFO 12.205:
52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements- Representation 52.204-7, System for Award Management 52.229-11, Tax on Certain Foreign Procurements—Notice and Representation 52.240-90, Security Prohibitions and Exclusions Representations and Certifications 52.240-91, Security Prohibitions and Exclusions Other RFO Clauses/Provisions https://www.acquisition.gov/far-overhaul https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html
52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions).
52.204-13, System for Award Management Maintenance 52.204-19, Incorporation by Reference of Representations and Certifications 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law 52.219-6, Notice of Total Small Business Set-Aside 52.219-28, Post Award Small Business Program Representation 52.222-3, Convict Labor 52.222-19, Child Labor—Cooperation with Authorities and Remedies 52.222-35, Equal Opportunity for Veterans 52.222-36, Equal Opportunity for Workers with Disabilities 52.222-37, Employment Reports on Veterans 52.222-50, Combating Trafficking in Persons 52.222-54, Employment Eligibility Verification 52.222-90, Addressing DEI Discrimination by Federal Contractors 52.223-23, Sustainable Products and Services 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.229-12, Tax on Certain Foreign Procurements 52.232.33, Payment by Electronic Funds Transfer-System for Award Management 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) 52-233-3, Protest After Award (Aug 1996) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) 52.244-6, Subcontracts for Commercial Products and Commercial Services 52.247-34, FOB Destination 52.252-1, Solicitation Provisions Incorporated by Reference 52.252-2, Clauses Incorporated by Reference 52.252-5, Authorized Deviations in Provisions 52.252-6, Authorized Deviations in Clauses
The following R-DFARS clauses are included but not limited to:
252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.203-7002, Requirement to Inform Employees of Whistleblowers Rights 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7008, Compliance with Safeguarding Covered Defense Information Controls 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting 252.204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services—Representation 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services 252.204-7024, Notice on the Use of the Supplier Performance Risk System 252.204-7998, Alt. I, Annual Representations and Certifications 252.223-7008, Prohibition of Hexavalent Chromium 252.225-7001, Buy American and Balance of Payments Program 252.225-7012, Preference for Certain Domestic Commodities 252.225-7048, Export-Controlled Items 252.225-7056, Prohibition Regarding Business Operations with the Maduro Regime 252.225-7059, Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region 252.225-7060, Prohibition on Certain Procurements from the Russian Federation 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7006, Wide Area WorkFlow Payment Instructions 252.232-7010, Levies on Contract Payments 252.247-7023, Transportation of Supplies by Sea
ATTACHMENTS
# DESCRIPTION DATE PAGES
1 Item Description 22 June 2026 1 2 CSS 22 June 2026 6
QUOTE SHEET
Solicitation # FA813226Q0046 - P26-118 Big Joe Furnace Parts Loader Tinker AFB, OK
Offerors are REQUIRED to return the portion of this CSS below with the completed information and authorized signature. Offerors may also provide their company’s quotation sheet in addition to this response page.
SECTION 1 – OFFEROR INFORMATION
Company Name
Address
CAGE Code and SAM UEI The Government cannot enter into contracts or agreements with Offerors not registered in SAM. For registration information, visit the SAM website (https://www.sam.gov/) and follow the instructions in the Quick Start Guide For SAM Registration, which can be found under the Help Tab and User Guides submenu.
Business Size
Web Page URL
Point of Contact
POC Phone # and email address
SECTION 2 – SUPPLIES AND PRICE
*** Please provide us with warranty information for any and all items in this RFQ ***
Delivery Time
___________ Days after Receipt of Order
CLIN
DESCRIPTION/PRODUCT
QTY
UNIT OF
ISSUE UNIT PRICE
TOTAL
PRICE
0001 Big Joe Furnace Parts Loader IAW Item Description 1 Lot
TOTAL QUOTE AMOUNT
SECTION 3 – CERTIFICATION OF RESPONSE
The Offeror is required to sign this document and return a copy to issuing office. By signing and returning this, the Offeror agrees to furnish and deliver all items set forth or otherwise identified above and on any additional sheets subject to the terms, conditions, provisions, clauses, and specifications of the solicitation and award (if received). The Offeror may be required to provide commercial product literature for any or all items quoted above as required/requested by the Contracting Officer.
NAME OF OFFEROR’S REPRESENTATIVE TITLE
SIGNATURE DATE
File details come from the government source that posted it. Updated .