05A._Product_File,_hardware.pdf

XY Series Hinges smmccabe Text Box Continuous Hinges Exterior Doors Only

Ives Architectural XY Series hinges

Aluminum Geared Hinges

ANSI CERTIFIED

All Ives Aluminum Geared Hinges are certified to ANSI 156.26, Grade 1 XY Models . . . . . . . . . . . .Grade 1 150lb and 300lb door test HD Models . . . . . . . . . . . .Grade 1 150lb door test

UL LISTED

All Ives Aluminum Geared hinges are tested and approved UL 10C (90 minutes).

MATERIAL

6063-T6 Aluminum

HINGE DUTY

All Ives Aluminum Geared Hinges are Heavy Duty(XY and HD Models)

XY Models:

handle the opening and closing of the door better over time. All sizes have 37 Bearings.

help with installation.

eliminates pinch points

HD Models: Features transmission gear design with bearings that are evenly spaced every 3" on center - Amount of bearings varies by size

- 83" . . . . . . . . . . . . . . . . . .32 Bearings

- 85" . . . . . . . . . . . . . . . . . .32 Bearings

- 95" . . . . . . . . . . . . . . . . . .36 Bearings

- 120" . . . . . . . . . . . . . . . . .47 Bearings

STANDARD LENGTHS

83", 85", 95", 119"(XY Models), 120"(HD Models) Custom lengths available up to 119", consult factory. Handing Required for 224HD

FINISHES

BHMA US Description Base Material 628 US28 Clear Aluminum Anodized Aluminum

Custom Finishes Available, Consult Factory

FIELD MODIFICATIONS

Ives Aluminum Geared Continuous hinges can be cut to length from both ends during installation.

XY Models

The unique mounting pattern of the XY hinge allows it to be cut down to 69" while still having double row fastners regardless of the original length of the hinge. Requires the hinge to be cut from both ends.

a 69" long hinge.

HD Models

The unique mounting pattern allows to cut up to 6" from bottom while still having double row fasteners. If cut more than 13.5", other modifications may be necessary.

DOOR WEIGHT

For doors up to 200 lbs, no door reinforcement is required. For doors between 200 and 450 lbs a 16 gauge channel in the frame is required. For doors up to 600 lb, rivet nuts are required in the frame in addition to the

HOSPITAL TIPS

Hospital Tip (HT) for XY models The new XY models features a new ligature resistant and tamper resistant Hospital Tip Cap. The new design provides a single uniform 45°

Hospital Tips (HT) for HD models The standard hospital tip option includes an angle machined channel cover and bearing to provide a flush angled surface. Recommended for HT retrofit applications only.

General Hinge Information

HD Model XY Model -

Slot Adjustability XY Model - Bearings smmccabe Rectangle

Ives Architectural XY Series hinges

Aluminum Geared Hinges

Options: Optional Mounting Hardware:

HT Hospital Tip

EPT Electric Power Transfer WD Wood Door and Frame TW8 CON Electrical Through Wire Panel with Allegion Connect

Available Accessory Kits:

Security Screws - Hollow Metal Security Screws - Wood Thread Forming Screws

027XY Full Mortise - Wide Door Leaf

UL10C certified Meets ANSI 156.26 for 150lbs and 300lbs

600 pounds with reinforcing

Standard lengths 83", 85", 95", 119"

Standard Mounting Hardware

Finishes

Custom Anodizing and Painting are available, consult factory

For Single Door Applications For pairs of doors see chart and general information

1 7/8" 2 3/4"

2 11/16"

5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door

McKinney is a brand associated with Corbin Russwin, Inc., an ASSA ABLOY Group company.

Copyright © 2012-2016, Corbin Russwin, Inc. All rights reserved.

Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.FM-4

800-346-7707 | www.mckinneyhinge.com Check the web site for the up-to-date catalog

FU

LL

M O

R

TI

SE

B

EA

R

IN

G

H

IN

G

ES

Three Knuckle Heavy Weight Series

TA386

TA786

Specifications

Inches mm Gauge No. of Holes

Fasteners

Machine Wood

41/2" x 4" 114.3 x 101.6 .180 8 1/2 x 12-24 11/4 x 12

41/2" x 41/2" 114.3 x 114.3 .180 8 1/2 x 12-24 11/4 x 12

5" x 41/2" 127 x 114.3 .190 8 1/2 x 12-24 11/4 x 12

5" x 5"* 127 x 127 .190 8 1/2 x 12-24 11/4 x 12

6" x 5"* 152.4 x 127 .203 10 1/2 x 1⁄4-20 11/2 x 14

6" x 6"* 152.4 x 152.4 .203 10 1/2 x 1⁄4-20 11/2 x 14

* Not available in Brass Base material.

No. ANSI Cross Reference Base Material Weight

TA386 A5111 Stainless HVY

TA386 A2111 Brass HVY

TA786 A8111 Steel HVY

Application

Heavy weight hinges should be used on all extra heavy doors or those exposed to high frequency use

Use for the common flush door/frame/wall application

Beveled Edge - where doors are beveled on hinge side specify TA5386 or TA5786

For available finishes see page 29

Decorative flat tips are available on 41/2" and 5"

Recommended for use on high frequency and/or heavy wood or metal doors in schools, hospitals or other public buildings where heavy traffic is experienced.

Options:

Code Description

NRP Non-Removable Pin

RC Round Corner – 1/4" radius furnished unless specified otherwise

HT Hospital Tip

SSF Safety Stud Feature

QC ElectroLynx® Hinge – 2, 4, 6, 8, 10 or 12 wire available

CC Concealed Circuit – 2, 4, 6, 8, 10 or 12 wire available

CC-18 Concealed Circuit – 2, 4, 6, 8 or 10 wire available (2-18AWG wires and the remainder 28AWG wires)

MM Magnetic Monitoring

FT Flat Decorative Tip (TA786 only)

Updated March 2016

FM-3

800-346-7707 | www.mckinneyhinge.com Check the web site for the up-to-date catalog

McKinney is a brand associated with Corbin Russwin, Inc., an ASSA ABLOY Group company.

Copyright © 2012-2016, Corbin Russwin, Inc. All rights reserved.

Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

FU

LL

M O

R

TI

SE

B

EA

R

IN

G

H

IN

G

ES

Three Knuckle Standard Weight Series

No. ANSI Cross Reference Base Material Weight

TA314 A5112 Stainless STD

TA314 A2112 Brass STD

TA714 A8112 Steel STD Application

TA314

TA714

Use for the common flush door/frame/wall application

Decorative tips are available

For available finishes see page 29

The full mortise bearing hinge is recommended for standard weight, medium frequency doors, or doors with closing devices.

Options:

Code Description

NRP Non-Removable Pin

RC Round Corner – 1/4" radius furnished unless specified otherwise

HT Hospital Tip

SSF Safety Stud Feature

QC ElectroLynx® Hinge – 2, 4, 6, 8, 10 or 12 wire available

CC Concealed Circuit – 2, 4, 6, 8, 10 or 12 wire available

CC-18 Concealed Circuit – 2, 4, 6, 8 or 10 wire available (2-18AWG wires and the remainder 28AWG wires)

MM Magnetic Monitoring

Specifications

Inches mm Gauge No. of Holes

Fasteners

Machine Wood

31/2" x 31/2"* 88.9 x 88.9 .123 6 1/2 x 10-24 1 x 10

4" x 4"* 101.6 x 101.6 .130 8 1/2 x 12-24 11/4 x 12

41/2" x 4" 114.3 x 101.6 .134 8 1/2 x 12-24 11/4 x 12

41/2" x 41/2" 114.3 x 114.3 .134 8 1/2 x 12-24 11/4 x 12

5" x 41/2"* 127 x 114.3 .146 8 1/2 x 12-24 11/4 x 12

5" x 5"* 127 x 127 .146 8 1/2 x 12-24 11/4 x 12

* Not available in Brass Base material

Decorative Tip Options (TA714 only)

FT Flat Tip

RT Round Tip

GT Grooved Tip

LT Lined Tip

BT Ball Tip

ST Steeple Tip

Note: Not available on 31/2 " x 31/2" hinges

FT

GT LT

RT

BT

ST

Updated March 2016

88 Series Exit device

Mortise – 3215 (Schlage

B502-191 cams)

Rim – 3216

Mortise lock and vertical rod device combination — same direction

Two vertical rods — double egressTwo rim devices with mullion — same direction

Two vertical rod devices — same direction (do not use with overlapping astragal)

Left hand reverse orientation

LHR

(Left hand reverse)

RHR

(Right hand reverse)

Outside

Right hand reverse orientation

Orientation

LHR

(L f h d )

RHR

(Ri h h d ) g Orientation

Door handing

Double door applications

Key retracts latch bolt, knob is rigid.

K-NL function trim is locked when key is removed.

Available with 88 Rim only.

To order trim, specify 880K-NL-R.

Trim operation lever

Standard operation Blank escutcheonNL Function

Key locks and unlocks lever. Lever always active. BE suffix, E.G., 371L-BE.

Lever will be locked when key is removed.

smmccabe Rectangle smmccabe Rectangle smmccabe Text Box At Pull side of Interior Stairway Doors.

smmccabe Typewritten Text Exit Devices are to be Less Bottom Rods and with Coordinators to Accommodate Astragal.

Standard levers

01 02

Knurling available

03*

Knurling available

06*

Default lever

Knurling available

07 12

(Handed)

17*

Knurling available

Standard trims

Exit only Key locks thumbpiece Pull when dogged Key locks knob

Key locks lever #06 Standard

Key locks thumbturn

(Pull required)

Product description 8827EO 8827TP1,2 8827DT 8827K1,2,3 8827L1,2,4,5,6 8827TL1,5,6

Trim description — 880TP-V 880DT-V 880K-V 373L 377T x 880DT-V

Escutcheon plate size

— 3" x 14 3/16" x 3/32" 3" x 14 3/16" x 3/32" 3" x 14 3/16" x 3/32" 11 1/16" x 7 1/2" x 7/8" 11 1/16" x 7 1/2" x 7/8"

Grip mounting center

— 5 1/2" 5 1/2" — — —

Projection — 2" 2" 2 3/4" 2 5/8" 1 13/16"

ANSI function 01 05 02 08 08/09 11/12

Cylinder type — Rim — Rim 1 1/4" Mortise 1 1/4" Mortise

Sex bolt quantity

#425 (optional) 16 12 12 12 12 12

Optional trims

Key locks thumbpiece

Dummy trim Pull when dogged Key locks knob Exit only

Product description 8827TP x 608TP1,3 8827DT x 608DT 8827K x 606K1,3 8827L x 880EO

Trim description 608TP-V 608DT-V 606K-V 880EO-V

Escutcheon plate size 1 5/8" x 13 1/2" x 3/16" 1 5/8" x 13 1/2" x 3/16" 1 5/8" x 8 3/4" x 3/16" 3" x 14 3/16" x 3/32"

Grip mounting center 5 1/2" 5 1/2" — —

Projection 2 1/6" 2 1/6" 2 3/4" —

ANSI function 03 02 08 01

Cylinder type Rim — Rim —

Sex bolt quantity

#425 (optional)

NR NR NR 12

1 If no cylinder operation is required, specify “BE” blank escutcheon, trim always operable; example 8827TP-BE.

2 Matching dummy trim available,use suffix “DT”; example 8827K-DT.

3 Can be furnished with NL action, thumbpiece or knob operates only when key is used. Use suffix NL; example 8827TP-NL.

4 When using sex bolts, an 889 cover plate is required. See page 24.

5 When using on wood doors without sex bolts, “WDA” cover plate is required. See page 24.

6 The 373L and 377T are shipped L or TL. An NL cylinder plate is also furnished standard (for operation only when key is used).

NR-Not recommended

Notes

EO DTTP

TP DT K EO

K L T smmccabe Rectangle smmccabe

Mounted on some of the Outside of Exterior Doors as Noted in the Hardware Schedule.

Specifications Device functions Device ships EO, DT, NL, TP, L, K

Handing Field reversible

Crossbar length 42" (1067 mm) field sizeable

Device centerline 39 13/16"

Crossbar centerline to finished floor

36 13/16" (935 mm) at center

Lock stile case 8 1/4" X 2 3/4" x 15/16" (210 mm x 70 mm x 24 mm)

Hinge stile case 6" X 1 3/4" x 15/16" (152 mm x 44 mm x 24 mm)

Crossbar tubing 1" (25 mm) outside diameter

Projection Neutral – 4 3/4" (121 mm)

Depressed – 4" (102 mm)

Latch bolt 3/4" (19 mm), throw

Fasteners All necessary mounting fasteners are included.

Electrical options RX Crossbar monitor switch in end case

E Electric unlocking (BE trim only)

Mechanical options RCB Reinforced crossbar

KN Knurled crossbar

Strikes 299 - Dull black

* Not applicable with all strike and mullion combinations, consult factory.

88 rim devices for all types of single and double doors with mullion, UL listed for accident hazard installations. Covers stock hollow metal doors with 86 or 161* cutouts. This device is field reversible.

Finishes – US26, US26D, US3, US4, US10B, US10, SPBLK

Hex key dogging comes standard on 88 Rim exit devices

The 299 Strike ships standard, optional strikes available

RX

Crossbar monitor switch opening monitor crossbar smmccabe

Single Doors Not Labeled

88-F fire exit rim devices for all types of 4' X 8' (1219 mm X 2438 mm) single and

8' X 8' (2438 mm x 2438 mm) double doors with 9954 mullion, UL listed, 3 hours.

This device is handed.

Finishes – US26, US26D, US3, US4, US10B, US10, SPBLK

Specifications Device functions Device ships EO, NL, TP, L, K

Handing Handed

Crossbar length 42" (1067 mm) field sizable

Device centerline 39 13/16"

Crossbar centerline to finished floor 36 13/16" (935 mm) at center

Lock stile case 8 1/4" X 2 3/4" x 15/16" (210 mm x 70 mm x 24 mm)

Hinge stile case 6" X 1 3/4" x 15/16" (152 mm x 44 mm x 24 mm)

Crossbar tubing 1" (25 mm) outside diameter

Projection Neutral – 4 3/4" (121 mm)

Depressed – 4" (102 mm)

Latch bolt Deadlocking – 3/4” (19 mm), throw

Fasteners All necessary mounting fasteners are included.

Electrical options RX Crossbar monitor switch in end case

E Electric unlocking (BE trim only)

Mechanical options RCB Reinforced crossbar

KN Knurled crossbar

Strikes 268 - Dull black

The 268 Strike ships standard, optional strikes available

RX

Crossbar monitor switch opening monitor crossbar smmccabe

Single Doors Labeled

8827-F surface mounted vertical rod devices for all types of 8' X 8' (2438 mm x 2438 mm), UL listed, 3 hours. Fits door stiles as narrow as 3 3/4" (95 mm). This device is field reversible.

Finishes – US26, US26D, US3, US4, US10B, US10, SPBLK

Specifications Device functions Field reversible

Device ships EO, TP, K, L, TL

Crossbar length 42" (1067 mm) field sizable

Device centerline 3913/16"

Crossbar centerline to finished floor

36 13/16" (935 mm) at center

Lock stile case 8 1/4" x 2 x 15/16" (210 mm x 51 mm x 24 mm)

Lock case 4 5/8" x 5 3/4" x 1 1/16" (117 mm x 146 mm x 27 mm)

Faceplate 1 1/4" x 8" x 7/32" (32 mm x 203 mm x 6 mm)

Cylinder backset 2 3/4" (70 mm)

Hinge stile case 6" x 1 3/4" x 15/16" (152 mm x 44 mm x 24 mm)

Crossbar tubing 1" (25 mm) outside diameter

Projection Neutral – 4 7/8" (124 mm)

Depressed – 4" (102 mm)

Latchbolt 5/8" (16mm) throw

Fasteners and sex bolts (SBN)

Includes screw pack for 1 3/4" (44 mm) and 2 1/4"

(57 mm) thick metal or wood doors. Sex nuts and bolts included.

Electrical options RX Crossbar monitor switch in end case

E Electric unlocking (BE trim only)

Mechanical options RGB Reinforced crossbar

KN Knurled crossbar

PL Pullman latch top and bottom

Strikes Bottom - 304L

304L Bottom Strike

Top Latch

Bottom Latch

Top Latch

RX

Crossbar monitor switch opening monitor crossbar smmccabe Text Box Pair Fire Rated Doors Mounted on Both Leafs smmccabe Typewritten Text Less Bottom Rods

* Note: Durable powder coated finishes available at specific special request. PLEASE CONTACT FACTORY.

Finishes*

Color US Number BHMA

Number

Chromium, polished

US26 625

Chromium, dull US26D 626

Brass, polished US3 605

Brass, dull US4 606

Bronze, dull-oxidized

US10B 613

Bronze, dull US10 612

Sprayed black SPBLK

L Series Commercial mortise locks

Our L9000 Series locks are ideal for use in schools, hospitals and factories, where the finest hardware must also deliver consistent, dependable operation and stand up to constant use and abuse.

Our L400 Series locks are designed for use as primary locks where no latching is required, such as restrooms and small doors to utility spaces.

They also offer optimum security when used as auxiliary locks in other applications.

1. High-strength steel alloy cylinder retainer

2. Armored front in brass, bronze or stainless steel; adjustable for door bevel

3. 1" (25 mm) stainless steel throw deadbolt

4. Deeper retainer groove in cylinder shell increases security against wrenching and pullout; all cylinders backward compatible

5. 6-pin Everest® cylinder with patented keys standard

6. Steel case and parts are corrosion resistant

Strength and durability

1. Fully wrapped heavy-gauge steel case protects against door edge attacks

2. All-metal zinc dichromate-plated working parts

3. Inside lock case protects electronic components

4. Two-piece anti-friction tongue reduces wear and tear

5. Outside and inside trim thru-bolted together and through the door

Security built in

6. Break-away spindle prevents unsecured failures and provides easy spindle replacement

7. Hub blocking plate protects lock against spindle manipulation

8. Spring-loaded fusible link provides fail secure mode in case of fire

9. Inside lever applied by screwless shank mounting – no exposed trim mount screws

Adaptable to your application

10. Universal lock case – ten functions in one case

11. Floating mounting tabs automatically adjust to fit a beveled door edge

12. Field-reversible handing without opening lock case

13. External spring cages allow for simple trim retrofit

14. Locking thumbturn on the inside of door visually shows when the door is locked and unlocked

15. Lever rotation in both directions (up and down) for ease of use

16. Independent lever rotation

2.875"

4.625"

1.969"

To learn more about suiting of Schlage and Von Duprin products with our decorative or standard levers contact your security consultant or visit allegion.com/us.

Accent

05 06

Latitude

St Annes

Asti

2.563"

4.75"

4.313"

2"

3.125"

2.5"

.5"

4.625"

2.875"

3.75"

2.281"

4.125"

2"

3.125"

4"

2"

2.625"

Finish options

Color Bright brass

Satin brass

Antique brass

Satin bronze

Oil rubbed

Bronze

Satin nickel

Bright chrome

Satin chrome

Bright stainless steel

Satin stainless steel

Aged bronze

ANSI/BHMA

number

605 606 609 612 613 619 625 626/626AM 629 630/630AM 643

US number US3 US4 US5 US10 US10B US15 US26 US26D US32 US32D US11

AM = Antimicrobial.

See pricebook for additional trim and finish availability. 33A, 95 & 99 devices not available in 619 & 630 finishes.

smmccabe Rectangle

Choose from three types of escutcheon and two rose sizes to add tough, durable performance to your lockset.

8" 203mm

8" 203mm

8" 203mm

Roses

L Full face Specify by adding ‘L’ after lever design.

Material: Cold-forged brass, bronze or stainless steel

Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e

Size: 8" x 1 3⁄4" x 7⁄16"

(203 mm x 44 mm x 11 mm)

A Wrought rose 2 1⁄8" (54 mm) diameter

Available for use on L Series knob and lever designs. Specify by adding ‘A’ after lever design

Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e

B Wrought rose 2 9⁄16" (65 mm) diameter

Available for use on L Series knob and lever designs. Specify by adding ‘B’ after lever design.

Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e

C Wrought rose 2 5⁄8" (66 mm) diameter

Available for use on L Series knob and lever designs. Specify by adding ‘C’ after lever design.

Finishes: 605, 606, 609, 619, 625, 626, 629, 630, 643e

L Concealed Specify by adding ‘C’ suffix to function and by adding ‘L’ after lever design.

Material: Cold-forged brass, bronze or stainless steel

Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e

Size: 8" x 1 3⁄4" x 7⁄16"

(203 mm x 44 mm x 11 mm)

N Escutcheon Specify by adding ‘N’ after lever design.

Material: Heavy wrought reinforced brass, bronze or stainless steel

Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e

Size: 8" x 2 9⁄16" x 7⁄16"

(203 mm x 65 mm x 11 mm)

Schlage ANSI

L9050 F04

LV9050

Office and inner entry lock

Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. When outside is locked, latchbolt is retracted by key outside or by knob/lever inside. Outside knob/lever remains locked until thumbturn is returned to vertical or unlocked by key. Auxiliary latch deadlocks latchbolt when door is closed. Inside liner is always free for immediate egress.

L9080EU

LV9080EU

Electrically unlocked (fail secure)

Outside knob/lever unlocked by 24V AC or DC. Latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

L9056

LV9056

L9050 with automatic unlocking

Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by rotating inside thumbturn. Outside knob/lever unlocked by key outside, thumbturn or closing door. Rotating inside knob/ lever simultaneously retracts latchbolt and unlocks outside knob/lever. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

L9080EL-RX / LV9080EL-RX

L9080EU-RX / LV9080EU-RX

Request to exit (RX) electrified lock

Same as L9080EL and L9080EU functions. In addition, a micro-switch positioned inside the lock case monitors the retractor crank, and is actuated when rotation of the inside or outside knob/levers rotates the retractor hub.

The switch signals the use of that opening to security systems, allowing a non-disruptive means of immediate egress. Specify per L283-263 with L functions, specify

L283-239 with LV functions. Inside lever is always free for immediate egress.

L9070 F05

LV9070

Classroom lock

Latchbolt retracted by knob/lever from either side unless outside is locked by key. Unlocked from outside by key.

Inside knob/lever always free for immediate exit. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

L9076 F06

LV9076

Classroom holdback lock

Latchbolt retracted by knob/lever from either side unless outside is locked by key. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is closed. Depress inside knob/lever and turn key 360° for holdback feature. Inside lever is always free for immediate egress.

L9080 F07

LV9080

Storeroom lock

Latchbolt retracted by key outside or by knob/lever inside.

Outside knob/lever is always inoperative. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

Schlage ANSI

L9080EL

LV9080EL

Electrically locked (fail safe)

Outside knob/lever continuously locked by 24V AC or

DC. Latchbolt retracted by key outside or by knob/lever inside. Switch or power failure allows outside knob/ lever to retract latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. Inside knob/lever always free for immediate exit. Inside lever is always free for immediate egress.

smmccabe Rectangle smmccabe Typewritten Text At Library Door smmccabe Rectangle

Schlage ANSI

L9460 F17

Cylinder x thumbturn lock

Deadbolt thrown or retracted by key outside or thumbturn inside.

Schlage ANSI

L460 E06071

Cylinder x thumbturn lock Deadbolt thrown or retracted by key outside or thumbturn inside.

L9462 F16

Double cylinder lock*

Deadbolt operated by key from either side.

L462 E06061

Double cylinder lock*

Deadbolt operated by key from either side.

L9463

Classroom lock

Deadbolt thrown or retracted by key from outside.

Inside thumbturn cylinder retracts deadbolt, but cannot project it.

L463 E06091

Classroom lock

Deadbolt thrown or retracted by key from outside.

Inside thumbturn cylinder retracts deadbolt, but cannot project it.

L9464 F18

Cylinder lock

Deadbolt thrown or retracted by key from one side. No trim on opposite side.

L464 E06081

Cylinder lock

Deadbolt thrown or retracted by key from one side. No trim on opposite side.

L9460 x XL11-635

L9460 with pull

Knob/lever both sides fixed. Deadbolt thrown or retracted by key outside or thumbturn inside.

L480

Door bolt

Deadbolt thrown or retracted by thumbturn from one side. No trim on opposite site.

L9460 x XL11-886

Single cylinder deadlock with pull

Deadbolt thrown or retracted by key outside or thumbturn inside. No latch, but inside knob or lever is spring-loaded. Rotating inside knob/lever also retracts deadbolt. Fixed outside knob/lever.

L496

Deadbolt with “occupied” indicator

Deadbolt thrown or retracted by key outside or thumbturn inside. When deadbolt is thrown

“Occupied” plate is displayed.

(Previously XL11-911)

L9462 x XL11-886

Double cylinder deadlock with pull*

Deadbolt thrown or retracted by key from either side. No latch, but inside knob/lever is spring-loaded. Rotating inside knob/lever also retracts deadbolt. Fixed outside knob/lever.

L9464 x XL11-886

Deadlock with pull

Deadbolt thrown or retracted by key from one side. No latch, but inside knob/lever is spring-loaded. Rotating inside knob/lever also retracts deadbolt. Fixed outside knob/lever.

smmccabe Rectangle smmccabe Typewritten Text At Bathroom Doors

* In a double-door application where the dummy will be used as the strike order 10-091 Armored

Front Strike separately.

Schlage ANSI

L9010 FO1

Passage latch

Latchbolt retracted by knob/lever from either side at all times. Inside lever is always free for immediate egress.

Schlage ANSI

L9444

LV9444

Privacy with deadbolt and coin turn outside

Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by inside thumbturn or outside coin turn. Throwing deadbolt locks outside knob/lever. Rotating inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/lever. Rotating outside coin turn retracts deadbolt and unlocks outside knob/lever.

Specify per L283-056 for Torx screws.

Available with rose trim only. Inside lever is always free for immediate egress. (Previously

XL11-868)

L0170

Half dummy trim

Knob/lever on one side fixed by mounting bar.

L0172

Full dummy trim

Knob/lever on both sides fixed by mounting bar.

L9175

Half dummy trim with lock case

Fixed knob/lever on one side inoperable.

Includes lock case and armored front. Options same as L9176 below.

L9176

Full dummy trim with lock case*

Fixed knob/lever on both sides. Includes lock case and blank armor front. May be ordered with optional XL11-743 armored front with cutout to receive deadbolt.

L9040 F22

LV9040

Bath/bedroom privacy lock

Latchbolt retracted by knob/lever from either side unless outside is locked by inside thumbturn. Turning inside knob/lever or closing door unlocks outside knob/lever. To unlock from outside remove emergency button, insert emergency thumbturn

(furnished) in access hole and rotate. Inside lever is always free for immediate egress.

L9044

LV9044

Privacy with coin turn outside

Latchbolt retracted by knob/lever from either side unless outside is locked by inside thumbturn or outside coin turn. Operating inside knob/lever, closing door, rotating inside thumbturn or rotating outside cointurn unlocks outside knob/lever. Specify per

L283-056 for Torx® screws. Available with rose trim only. (Previously XL11-868)

L9440

LV9440 F19

Privacy with deadbolt

Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by inside thumbturn. Throwing deadbolt locks outside knob/lever. Rotating inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/lever. To unlock from outside remove emergency button, insert emergency thumbturn in access hole and rotate. Inside liner is always free for immediate egress. (Previously XL11-761.)

smmccabe Rectangle smmccabe Typewritten Text At Staff Bathrooms

Cylinders for Schlage L Series mortise locks

Design Function

Core mechanism

Everest 29 restricted (GD suffix)

Keyed construction (HD suffix)

Disposable construction (BDC suffix)

Housing less core (BD suffix)

L & N escutcheons (cylinders with compression ring and spring)

All except L9060 outside

80-308 80-138 80-115 80-108

L9060 outside 80-304 80-134 80-112 80-104

Sectional trim (cylinder with compression ring, spring and 1⁄4" blocking ring).

All except L9060 outside

80-301 80-131 80-109 80-101

L9060 outside 80-304 + 36-082-050

80-134 36-082-050

80-112 36-082-050

80-104 36-082-050

Notes 1. Available in 605, 606, 609, 612, 613, 619, 625, and 626 finish. Cores furnished 606 and 626 only.

2. All cylinders are 1 3⁄8" long.

Cylinder Only Compr. Ring & Spring With Blocking Ring

L583-255 Cam for all functions

Except L9060 outside

K510-680 Cam for

L9060 outside

Mortise cylinders with straight cam for exit devices

Number Core type

80-302 Everest 29 restricted core

80-110 Disposable constr. core

80-132 Keyed constr. core

80-102 Housing less core

Furnished with compression ring, spring and 1⁄4" blocking ring.

Notes 1. Available in 605, 606, 612, 613, 629, 625, and 626 finish.

Cores furnished 606 and 626 only.

2. All cylinders are 1 3⁄8" long.

K510-730 Straight cam, other applications

Cores

11⁄2"

Ives Architectural hardware products C12

Coordinators – Bar Coordinators and Filler Bars

B Pu lls

P la te s

A H in ge s

P iv ot s

C1

Fl us h Bo lt s &

C oo rd in at or s D

La tc he s, C at ch es

B ol ts

E St op s F

Ex te rio r H ar dw ar e

G M is ce lla ne ou s H ar dw ar e

COR Series Bar Coodinators when one door needs to close before the other.

the active stop, holds the active door open until the trigger mechanism is released by the closing of the inactive leaf.

allows the active door to close under extreme pressure.

widths.

so a FL filler bar can be provided to maintain architecturally clean lines.

to maintain clean line.

MB3F, MB1V, MB2V, and MB3V for other stop applied hardware.

FL Series Filler Bars openings.

For Openings Where Doors Are Same Size

Coordinator Length of For Opening Common Number Channel Widths Applications

COR32 32" 34" - 52" Pair of 2'0" Doors

COR42 42" 52" - 72" Pair of 2'6" Doors

COR52 52" 62" - 92" Pair of 3'0" Doors

COR60 60" 70" - 108" Pair of 3'6" Doors

COR72 72" 84" - 132" Pair of 4'0" Doors

For Openings Where Doors Are Unequal Size

The coordinator length should equal the active door width plus approximately 1/2 the inactive door width. The coordinator must be 6" longer than the active door width and shorter than the overall frame opening between stops.

Filler Bar Number Length Dimensions

FL20 20" 1-5/8" W x 5/8" D x 20" L

FL32 32" 1-5/8" W x 5/8" D x 32" L

FL44 44" 1-5/8" W x 5/8" D x 44" L

Meets ANSI/BHMA A156.3, Type 21A.

UL Listed for installation on labeled frame.

Finishes Ives Finish US28 US26D 315AN

BHMA 628 713 711

Finishes Ives Finish US28 US26D 315AN

BHMA 628 713 711

smmccabe Rectangle smmccabe Rectangle smmccabe Typewritten Text Black Anodized

C13

Coordinators – Mounting Brackets

B Pulls &

Plates A

H inges &

Pivots C

Flush Bolts &

Coordinators D

Latches, Catches & Bolts

EStops F

Exterior H ardw are G

M iscellaneous H ardw are

MB1and MB2 Mounting Brackets damaging the COR coordinator, such as a parallel arm closer or a non-fire-rated surface vertical rod strike.

for the height of the coordinator and mounting bracket.

MB1F, MB2F and MB3F Fire Rated Mounting Brackets MB1V, MB2V and MB3V without damaging the COR Coordinators, such as fire-rated surface vertical rod exit device strikes.

coordinator and mounting bracket.

Product Jamb Depth Stop Width Dimensions

MB1 4-3/4" Min. Over 2-1/2" 4" W x 3" D x 15/16" T

MB2 4-3/4" Min. Up to 2-1/2" 4" W x 3-1/4" D x 1-5/8" T

Product Jamb Depth Stop Width Dimensions

MB1F 5" 1-1/2" - 2-1/4" 4" W x 3" D x 1-5/8" T

MB1V 5" 1-1/2" - 2-1/4" 4" W x 3" D x 1-5/8" T

MB2F 5-7/8" 2-3/8" - 3-1/4" 4"W x 4" D x 1-5/8"T

MB2V 5-7/8" 2-3/8" - 3-1/4" 4"W x 4" D x 1-5/8"T

MB3F 6-7/8" Over 3-3/8" 4"W x 3-1/2" D x 1"T

MB3V 6-7/8" Over 3-3/8" 4"W x 3-1/2" D x 1"T

Finishes Ives Finish USP SP28 SPBLK

BHMA 600 689 622

Finishes Ives Finish USP SP28 SPBLK

BHMA 600 689 622

MB1V MB2V

MB3V

smmccabe Rectangle

37LCN Door Control Catalog phone: 877-671-7011 fax: 800-248-1460 www.allegion.com/us 009426 rev. 2/16

AVAILABLE

NOT AVAILABLE

Features

4040XP

Series

The 4040XP is LCN’s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications.

Certifications Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy American Act

Body Construction Cast Iron Body Full Complement Bearings

Fluid

Handing Non-Handed

Templating

Size Green Dial

Warranty 30 years

Cover Metal, Optional

Fasteners

Mounting

Arms Regular Arm

Finishes/Colors/ Powder Coat

Custom colors optional

Optional plated finishes

Special Templates

PLA

STIC

META

L

HIN

GE (P

ULL)

SIDE

TOP JAMB (P

ULL

TOP JAMB (P

USH)

PARALL

EL A

RM

STOP FA

CE

MOUNTING COVER

180° 180° 180° 110°110°

STA

NDARD (S

INGLE)

REG

ULA

R (D

OUBLE)

HOLD

-O

PEN

FU

SIB

LE

LI

NK

EDA/H

EDA

CUSH/H

CUSH

SCUSH/SHCUSH

DOUBLE

EGRESS

*ARM FUNCTIONFINISH CYLINDER

NON-H

ANDED

NON-S

IZED

ACCESSIB

ILI

TY

DELAYED ACTION***

AVB**

POW

DER COAT

PLA

TED

smmccabe Rectangle smmccabe Rectangle smmccabe

All Door Closers are to be Mounted on Least Objectionable Side to Public View.

38 LCN Door Control Catalog

2-1/4" 57 mm

11" 279 mm

1-1/16" 27 mm

3/4" 19 mm2-11/16"

68 mm 10-7/16" 625 mm

5/8" 16 mm

12-1/4" 311 mm

3-1/2" 89 mm

3-3/4" 95 mm

4040XP-18

Hinge (Pull Side) Mounting

Mounting details

4040XP

Series

Butt Hinges

Auxiliary Stop

Reveal

Top Rail

Clearance

Delayed Action

Maximum Opening smmccabe

Interior Doors Pull Mount

41LCN Door Control Catalog

Mounting details

4040XP

Series

EDA and CUSH Mounting

Clearance

Head Frame

CUSH ARM

Delayed Action

Maximum Opening

Notes:

e es ose s o e e t o s e to s o t t e s oe s sto o ts e o te o e t te te sto o t o o e t te te sto o ts

CUSH mount

EDA mount

AB

4" 102 mm

14-1/16" 357 mm

3-1/2" 89 mm

12-1/4" 311 mm

4040XP-18PA

2-1/4" 57 mm

5-1/4" 133 mm

5-1/4" 133 mm

AB

4" 102 mm

5-1/2" 140 mm

14-1/16" 357 mm

3-1/2" 89 mm

12-1/4" 311 mm

4040XP-18PA

2-1/4" 57 mm

6" 152 mm

5-1/4" 133 mm smmccabe Text Box Interior Doors Push Mount smmccabe

Exterior Doors

42 LCN Door Control Catalog phone: 877-671-7011 fax: 800-248-1460 www.allegion.com/us 009426 rev. 5/16

4040XP-3071

Cast Iron Cylinder Assembly

Non-handed

4041-3071 DEL

Cast Iron Cylinder Assembly

Used for delayed action closing

Non-handed

4040XP-72

Plastic Cover

Non-handed

Standard

4040XP-72MC

Metal Cover

Handed

Optional

4040XP-18

Plate

4040XP-18G

Plate frame face in flush ceiling condition minimum head frame

4040XP-18TJ

Plate minimum head frame

4040XP-18PA

Plate measured from the stop top rail

Cylinders

Installation Accessories

Covers

Accessories

4040XP

Series

4040XP-62PA

PA Shoe mounting

4040XP-18TJ 4040XP-18PA

Plate

4040XP 72

43LCN Door Control Catalog

4040XP-3077

Regular Arm

Non-handed

4040XP-3077ELR

Extra Long Arm

Non-handed

Optional

4040XP-3049

Hold-Open Arm

Non-handed parallel arm mounting

Optional

4040XP-3077L

Long Arm

Non-handed

Optional

4040XP-3049EDA/62G

Hold-Open Extra Duty Arm with 62G

Handed

Features forged, solid steel main and forearm for potentially function is adjusted at the shoe

Optional

4040XP-3049SCNS

Spring HCUSH Arm

Non-handed solid forged steel main arm and the soffit shoe

Handle controls hold-open function

Optional

4040XP-3077CNS

Cush-N-Stop® Arm

Non-handed

Features solid forged steel main arm

Optional

4040XP-3049CNS

HCUSH Arm

Non-handed templated stop/hold-open points

Handle controls hold-open function

Optional

4040XP-3049L

Long Hold-Open Arm

Non-handed mount

Optional

4040XP-3077EDA

Extra Duty Arm

Non-handed

Features forged, solid steel main and forearm for potentially

Optional

4040XP-3049EDA

Hold-Open Extra Duty Arm

Handed solid steel main and forearm for

Hold-open function is adjusted at the shoe

Optional

4040XP-3077EDA/62G

Extra Duty Arm with 62G

Non-handed

Features forged, solid steel main and forearm for potentially

Optional

4040XP-3077SCNS

Spring CUSH Arm

Non-handed solid forged steel main arm and the soffit shoe

Optional

Arms

Accessories

4040XP

Series

4040XP-3077 4040XP-3077L 4040XP-3077ELR

Optional

4040XP 3077SCNS 4040XP 3049SCNS

4040XP 3077EDA 4040XP 3049EDA

smmccabe Rectangle smmccabe Rectangle

45LCN Door Control Catalog

Table of sizes

Ordering Information

4040XP

Series

Closer will be shipped with:

- Standard cylinder

- Regular arm unless options listed below are selected.

1. Select finish Standard Powder Coat __________

Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass.

Reduced opening force 4040XP Series closers

CAUTION !

How-to-order 4040XP Series closers

* Maximum opening force.

*4040XP *4040XP

Exterior (and vestibule) door width

610mm

30 36 42 48

Interior door width

610mm

30 38 48 54 60 1524mm

* usta e i e t ru .

Closer options

Cylinder Delayed Action (4041 DEL)

Cover Metal (specify right or left hand) (MC)

Finish Custom Powder Coat (RAL) ___________

(handed metal cover required) Plated Finish, US ______________

(handed metal cover required) SRI primer (use with powder coat finishes only)

Arm Regular (REG) Regular w/62PA (Rw/PA) Regular w/62A (R/62A) Long (LONG) Extra Long (XLONG) Hold-Open (H) Hold-Open w/62PA (Hw/PA) Long Hold-Open (HLONG) Extra Duty Arm (EDA) Extra Duty Arm with 62G (EDA/62G) Hold Open Extra Duty Arm (HEDA)

(Handed) Hold Open Extra Duty Arm with 62

(HEDA/62G)(Handed) Cush-N-Stop (CUSH) HCush-N-Stop (HCUSH) Spring Cush (SCUSH) Spring HCush (SHCUSH)

Optional Screw Packs TB* w/Self-Reaming and Tapping (TBSRT) Wood & Machine Screw (WMS) TB*, Wood & Machine Screw (TBWMS) TORX Machine Screw (TORX) TB* & TORX Machine Screw (TBTRX)

* Specify door thickness if other than

Installation Accessories Plate, 4040XP-18 Plate, 4040XP-18TJ Plate, 4040XP-18G Plate, 4040XP-18PA CUSH Shoe Support, 4040XP-30 Blade Stop Spacer, 4040XP-61 Auxiliary Shoe, 4040XP-62A PA Flush Panel Adapter, 4040XP-419

Special Template

ST- _________

DOOR WIDTH 36 42 48

5LCN Door Control Catalog

General information

STANDARD POWDER COAT FINISHES

LCN powder coating provides superior protection against the effects of weather conditions and is an environmentally friendly process. The high quality, chip resistant finish is far superior to any previously offered.

Corrosion resistance surpasses 100 hours salt spray testing (four times the industry standard). Non-metallic components also provide the same high resistance to the effects of the elements. All LCN products must be shipped with a finish.

LCN STANDARD FINISHES

(CLOSEST BHMA EQUIVALENT):

OPTIONAL PLATED FINISHES

Visible components such as metal covers, arms, fasteners, and finish plates are plated to match the selected finish. Surface mounted tracks are powder coated to compliment the plated finish. Hidden assemblies such as cylinders, tracks, and mounting plates are supplied with a powder coated finish. Plated finishes require handing of closers.

LCN PLATED FINISHES:

US 3 Bright Brass (BHMA 632) US 4 Satin Brass (BHMA 633) US 10 Satin Bronze (BHMA 639) US 11 Satin Bronze (BHMA 643) US 15 Satin Nickel (BHMA 646) US 26 Bright Chrome (BHMA 651) US 26D Satin Chrome (BHMA 652)

LCN PAINTED FINISHERS

Aluminum ALUM (BHMA 689) Dark Bronze DKBRZ (BHMA 695)

SPECIAL RUST INHIBITING (SRI) PROCESS

For installations where a higher level of protection against weather conditions, or the effects of a potentially corrosive atmosphere is required, LCN offers a special rust inhibiting (SRI) process. Ferrous metal components receive an SRI pretreatment and a standard powder coat finish of your choice, or a custom powder coat finish for a nominal additional cost. Closers treated with the SRI process exceed the 100 hour protection level available with standard LCN powder coated finishes. For details, contact your local SSC representative or the LCN factory.

STANDARD ANODIZED FINISHES

LCN Senior Swing & Benchmark electromechanical power operators are offered with an anodized finish. Anodizing is an electrochemical process that thickens and toughens the protective oxide on aluminum metal.

LCN ANODIZED FINISHES:

Aluminum ANCLR (BHMA 628) Dark Bronze ANDKBRZ (BHMA 710)

OPTIONAL CUSTOM POWDER COAT FINISHES

LCN offers custom powder coating to provide a custom appearance and all the corrosion resistance of standard powder coat finishes at a nominal additional cost. LCN uses the RAL numbering system for the 150+ custom colors available. Contact your local SSC representative for a brochure showing the available custom colors. Note:

Custom powder coat finishes require a metal cover.

ALUM ALUMINUM (BHMA 689)

DKBRZ DARK BRONZE (BHMA 695)

STAT STATUARY BRONZE (BHMA 690)

LTBRZ LIGHT BRONZE (BHMA 691)

BLK BLACK (BHMA 693)

BRASS BRASS (BHMA 696)

Finishes

B14

Protection Plates

B

Pu lls

P la te s A

H in ge s

P iv ot s C

Fl us h Bo lt s &

C oo rd in at or s D

La tc he s, C at ch es

B ol ts

E St op s F

Ex te rio r H ar dw ar e

G M is ce lla ne ou s H ar dw ar e

8400 Series Protection Plates steel or aluminum; and 1/8” thick high impact polyethylene in clear or black.

Optional screw packs are available for TEK or TORK screw heads.

Refer to the following chart for ordering.

Kickplate Gasket Tape Tape is recommended when using a brass plate on a metal door to reduce tarnishing from electrolytic oxidation. One tape pack will cover an the perimeters of a 8” x 34” kickplate. Order 8401 Gasket Tape.

8400 Protection Plate 8402 (UL)* Protection Plate *UL mark appears in upper right corner. Factory supplied screws must be used.

Number of screw packs required by plate size (specify TEK Screws or TORK screws).

22”-25” 26”-33” 34”-41” 42”-48” 4”-8” 1 1 1 1 9”-16” 1 1 1 1 17”-24” 1 1 1 2 25”-32” 1 1 2 2 33”-40” 1 2 2 2 41”-48” 2 2 2 2

Finishes brass 24” x 48” max. size US Number US3 US4 US10 US10B US15 US26 US26D

BHMA 605 606 612 613 619 625 626

Finishes stainless steel US Number US32 US32D

BHMA 629 630

Finishes aluminum US Number US28

BHMA 628

Finishes plastic Clear and Black

Residential Grade Kickplates available Carded only, finishes PA28, PA3, PA619, PA716, B3, B505, B619, B716 smmccabe Rectangle

73E - Push Plate - .125" Thick 6" x 16" Plate

Specifications:

Material: Aluminum, Brass, Bronze, Stainless Steel

Features: Four beveled edges.

smmccabe Text Box Bathroom Doors ctavener Pencil ctavener

Architectural Accessories & Door Trim

Available Finishes:

• US28/628

• 313/710

• 315/711

• Powder Coat

• US3/605

• US4/606

• US10/612

• US10B/613

• US10BE/613E

• US26/625

• US26D/626

• US32D/630

• US32/629

• US32DMS

• US32D316

• US32316

• US3LIFETIME

112 - Door Pull

ROCKWOOD Manufacturing Company Rockwood, Pennsylvania 15557 Phone: (800) 458-2424 • Fax: (800) 922-9212 www.rockwoodmfg.com • info@rockwoodmfg.com Copyright © 2011-2015, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited. CS-112 11/15

Specifications:

MATERIAL:

Aluminum, Brass, Bronze, Stainless Steel

FASTENER:

1/4 - 20 x 21/4" thru bolt & finish washer (standard 13/4" door)

OPTIONS:

• Back to back mounting in pairs — use BTB suffix and mounting type number (112BTB5)

• Concealed mounting single pulls — use C suffix and mounting type number (112C6)

• Advise if door thickness is other than 13/4"

• Heavy duty versions of most fastening types available – use suffix HD to fastening type number

(112BTB5HD)

• 21/2" Barrier Free clearance — use BF prefix (BF112)

MATERIAL SIZE:

1" dia.

CTC:

12"

OVERALL:

13"

BASE:

1"

PROJECTION:

3"

CLEARANCE:

2"

WEIGHT:

4.0 lbs.

ANSI A156.6: J401

smmccabe Rectangle smmccabe Text Box Bathroom Doors and the Outside of Exterior Doors.

smmccabe Highlight smmccabe Highlight

DORMA

ED100

ED250

Compact Low Energy/ Full Energy Swing Door Operators

ED100 & ED250

Low Energy/Full Energy Compact Swing Door Operators

The DORMA ED100 and ED250 are compact next generation electro mechanical swing door operators that are innovative, simple, and elegant.

Innovative State-of-the-art microprocessor motion control system continuously monitors and controls the door through the entire cycle.

Wind load control and power boost options ensure safe and secure opening and closing in changing conditions.

Optimized settings for primarily manual or automatic use.

Advanced automatic power assist combines minimal push forces (as low as ANSI size 1) with reliable closing.

Modular design allows new applications to be added and adjustments made post installation without replacing the operator.

Integrated connections for safety sensors and other accessories.

Green design & performance The ED100/ED250 operators reflect DORMA’s commitment to the environment in both manufacture and performance. Each unit is smaller and lighter than previous swing door operators. Lower weight in turn reduces the amount of energy required for shipping.

Once installed, the ED100/ED250 helps to minimize heat loss due to doors closing improperly.

DORMA Entrance Systems

Toll Free: 877.367.6211

Fax: 877.423.7999 www.dorma-usa.com

Simple The ED100/ED250 operator is exceptionally easy to install. The low-profile height (less than 3") makes installation easy and minimizes modifications to adjacent work.

The universal design allows the same operator to be used for any hand of door.

Mounting plate installation provides a simple one-person install process with easy electrical hookup and without heavy lifting.

Modular concept and intelligent coordination make it simple to field-fit the operator to any application, single or pair.

Fully integrated electronics and optional mechanical coordinator minimize the need for extra devices.

Simple configuration with on-board electronics and easy-to-install design make the system fast to install and maintain.

Elegant The compact ED100 and

ED250 operators are discreet both visually and audibly. Their elegant Contur design blends into and enhances any décor.

With virtually silent operation, the automation of the door can be easily integrated without compromising the style and feel of the entrance.

DORMA ED100: for doors up to 220 lb (100 kg)

DORMA ED250: for doors up to 550 lb (250 kg)

Dimensions: 27" long

× 2-3/4" high × 5-1/8" deep

The operators can be installed as push versions with standard arms or pull versions with a slide channel.

5.12CT (reprinted 6.12) 2.5M USA 070004275.12CT (reprinted 6.12) 2.5M USA 07000427

CHAPTER

DORMA

DORMA

ED400-IG

Low energy operator

DORMA ED400-IG

276_

Copyright © 2008 Pemko Manufacturing Co. All rights reserved.

Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

276_CUT Rev 1 - 04.01.08

TITLE:

PREPARED FOR:

PREPARED BY:

DATE:

COMMENTS:

COMMERCIAL ThREShOLDS:

SADDLE ThREShOLDS

AVAILABLE FINISHES: A, B, D, G

WIDTH: 7” (177.5 mm) HEIGHT: 1/4” (6.4 mm)

A (Mill Finish Aluminum) B (Mill Finish Extruded Bronze [Brass]) D (Dark Bronze Anodized) G (Gold Anodized) smmccabe Rectangle

305_R

Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

305_R_CUT Rev 1 - 05.14.08

TITLE:

PREPARED FOR:

PREPARED BY:

DATE:

COMMENTS:

PERIMETER GASKETING:

STANDARD PERIMETER GASKETING

AVAILABLE FINISHES: B, C, D, G

WIDTH: 3/16” (4.8 mm)

PROFILE HEIGHT: 7/8” (22.2 mm) TOTAL HEIGHT WITH INSERT: 1-1/8” (28.6 mm)

B (Mill Finish Extruded Bronze [Brass]) C (Clear Anodized Aluminum) D (Dark Bronze Anodized Aluminum) G (Gold Anodized Aluminum) smmccabe Rectangle

315_N

Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

315_N_CUT Rev 1 - 05.14.08

TITLE:

PREPARED FOR:

PREPARED BY:

DATE:

COMMENTS:

DOOR BOTTOMS: DOOR BOTTOM SWEEPS

AVAILABLE FINISHES: B, C, D, G, SN

WIDTH: 1/4” (6.4 mm)

PROFILE HEIGHT: 1-1/4” (31.8 mm) TOTAL HEIGHT WITH INSERT: 1-11/16” (42.9 mm)

B (Mill Finish Extruded Bronze [Brass]) C (Clear Anodized Aluminum) D (Dark Bronze Anodized Aluminum) G (Gold Anodized Aluminum) SN (Satin Nickel Anodized Aluminum) smmccabe Rectangle

369_P

Copyright © 2014 Pemko Manufacturing Co. All rights reserved.

Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

369_P_CUT Rev 3 - 04.29.14

TITLE:

PREPARED FOR:

PREPARED BY:

DATE:

COMMENTS:

ASTRAGALS & MEETING STILES:

MEETING STILE GASKETING

AVAILABLE FINISHES: A, D, G

PROFILE WIDTH: 5/32” (4.0 mm) TOTAL WIDTH WITH INSERT: 11/32” (8.8 mm) HEIGHT: 13/32” (10.3 mm)

A (Mill Finish Aluminum) D (Dark Bronze Anodized Aluminum) G (Gold Anodized Aluminum) smmccabe Rectangle

ED400IG