Attach_4_-_USACE_non_shared_Specifications.pdf

UNIFORM COMPONENT SPECIFICATIONS

Hat Castle Pin, Customized USACE

GENERAL DESCRIPTION

Item is a customized USACE castle ensign shaped hat pin.

PERFORMANCE/WORK ENVIRONMENT SALIENT CHARACTERISTICS

• Worn on the straw or felt campaign ranger hat in an indoor and outdoor environment

• Shall have a two post pin back with grabbers to prevent slipping

COMPONENT

• Gold plated brass hat pin in shape of the U. S. Army Corps Of Engineers castle ensign with relief work

• Castle to be 1 1/8 inch wide and 3/4 inch high

• Gold electroplated to high gloss finish and polished border and center motif

• Gold plating must be durable and not wear or flake off

PRODUCTION SAMPLE

• Sample must be approved by the USACE COTR

LONG SLEEVE MOCK TURTLENECK (UNISEX)

The garment is a base layer mock turtleneck.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn as a base layer in an indoor and outdoor work environment

• The fabric shall stretch/allow for flexibility

• The fabric weave shall be breathable, fast drying, and possess moisture wicking capabilities

• The fabric shall be anti-microbial/odor resistant

• The fabric shall be stain and snag resistant

• The fabric shall be machine washable

• The fabric shall be colorfast and resist fading, shrinking and pilling

• The fabric shall be a lightweight material

COLOR CHARACTERISTICS

• Black

STYLE CHARACTERISTICS

• Collar: Interlock knit, double-ply collar

• Cuffs: The cuffs should be rib knit cuffs

SIZE CHARACTERISTICS

Stock: XS – 3XL

Non-stock: XXS, 4XL, 5XL

Waist Length Parka with Detachable Hood, USACE (UNISEX)

The garment is a waist length parka with a detachable insulated hood.

• Worn as an outer layer in an outdoor work environment

• The fit shall be comfortable and allow for be full range of motion to including bending

• Parka shall be fully lined and insulated

• Parka shall have a front storm flap and a two way zipper with outer snap closures

• The fabric weave shall be wind and water resistant

• The fabric shall be anti-microbial/odor resistant

• The fabric shall be stain and snag resistant

• The fabric should be machine washable

• The fabric shall be colorfast and resist fading, shrinking and pilling

• The front zippers shall be located mouth to mouth for two way movement and access up and down

• The hood shall be insulated and detachable

• The fabric shall be GORE-TEX or equivalent

• Forest Green - COE

• Badge Tab: Reinforced with matching material and two centered reinforced eyelets for badge on left chest

• Name Tab: Reinforced with matching material and two centered reinforced eyelets for nametag on right chest

• Drawstring: Should have a concealed drawstring tunnel at the waistline, beginning and ending at the zipper tape/weather flap seams.

• Cuffs and Collar: Should be knitted cuff sewn into the lining/outer seam

• Pockets: Should have hand-warmer slash pockets on the front, at minimum one zippered patch pocket inside the breast and pockets in the side seams with secure closures

• Lining: should be sewn into the insulation batting to prevent rolling and bunching

• Zippers: Shall have double sliders with long tabs and storm flaps

• Sleeves: Should be fully lined

• Hanger Loop: Should have a nylon or similar tape hanger loop sewn into the inside of the collar at center back

• Hood: Lined and insulated matching fabric with visor, drawstring front closure with cord locks and snap front closure, and snap attachments to matching placement on parka

• Part of integrated outwear system (waist length overshell, fleece jacket and down parka)

CUSTOMIZATION

The appropriate agency patch sewn centered onto top of left sleeve

SIZE CHARACTERISTICS

Stock: XS – 3XL

Non-stock: XXS, 4XL, 5XL

SECTION C UNIFORM COMPONENT SPECIFICATIONS

Tie Bar, Customized USACE

Item is customized tie bars with USACE castle ensign.

• Worn on the clip-on and four-in-hand tie in an indoor and outdoor environment

• Separate design to fit slide onto male and female style shirts

COMPONENT/CUSTOMIZATION

• Gold plated brass tie bar with U. S. Army Corps Of Engineers castle ensign with relief work

• Castle ensign to be 3/8” wide permanently affixed to tie bar

• Tie bar to be industry standard width and length

• Thickness minimum 1/32 inch

• Gold electroplated to have high gloss finish and polished border and center motif highlights

• Gold plating must be durable and not wear or flake off

• Sample must be approved by USACE COTR

Tie Tac, Customized USACE

Item is a customized tie tac with USACE castle ensign.

• Worn on the clip-on and four-in-hand tie in an indoor and outdoor environment

• Shall have a pin back with grabber to prevent slipping

• Shall have minimum ½ inch chain and bar attachment

COMPONENT/CUSTOMIZATION

• Gold plated brass tie tac in the shape of the U. S. Army Corps Of Engineers castle ensign with relief work

• Castle to be ¾ inch wide and 1/2 inch high

• Gold plated to high gloss finish and polished border and center motif highlights

• Gold plating must be durable and not wear of flake off

• Sample must be approval by USACE COTR

Volunteer Ball Cap, Summer, USACE (Unisex)

Garment is an open mesh baseball style cap

• Worn in an outdoor work environment

• The fit shall be comfortable

• The fabric content shall be a durable performance material

• The fabric weight shall be suitable for all weather conditions

• The fabric shall be colorfast

• The fabric shall resist stains

• Fabric shall be an open mesh

• Red

• Tan

STLYE CHARACTERISTICS

• Rear Outlet: Should be folded under and taped down

• Backstrap: Should be plastic tape to match twill material with holes and pins to snap for secure closure

• USACE Volunteer patch sewn or embroidered centered ½ inch above bill

SIZES

M, R, XL

Volunteer Ball Cap, Twill, USACE (Unisex)

Garment is an enclosed baseball style cap

• The fabric content shall be a durable performance material

• The fabric weight shall be suitable for all weather conditions

• The fabric shall be colorfast

• Body: Beige

• Bill: Black

• Backstrap: Should be beige fabric, sewn into a strip that is fastened with brass buckle and sewn into bottom left and right rear panels

• USACE Volunteer patch sewn on or embroidered centered ½ inch above bill

M, R, XL

Volunteer Ball Cap, USACE (Unisex)

Garment is a summer baseball style cap

• The fabric content shall be a durable performance material

• The fabric weight shall be suitable for all weather conditions

• The fabric shall be colorfast

• Tan

USACE Volunteer patch sewn on centered ½ inch above bill

Regular and X-Large

UNIFORM COMPONENTS SPECIFICATIONS

USACE VOLUNTEER HOODED SWEATSHIRT (UNISEX)

The garment is a basic hooded sweatshirt with full zip closure

• The fit shall be comfortable and allow for full range of motion

• The fabric content shall be a performance material

• The fabric weight shall be suitable for an indoor and outdoor environment

• The fabric shall be machine-washable

• The fabric shall resist fading

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

• Garment shall have full front zipper closure and pockets

• Pockets: Should have split muff pocket on lower front

• Collar and Sleeve Welts: Rib knit dyed to match shirt color

The garment shall have an official U.S. Army Corps of Engineers Volunteer Emblem patch sewn centered on the left chest

S-5XL