Amend_0002_Attach_5_FWS_non_shared_Specifications.pdf

UNIFORM COMPONENTS SPECIFICATIONS

Special Purpose Ball Cap

General Description:

Ball Cap

Performance/Work Environment Characteristics:

O to be worn in an outdoor environment O heavy weight fabric O durable O stain resistant

Color Characteristics:

O Special purpose – graphite, earth O YCC – green O Volunteer – navy blue

Style Characteristics:

O low profile O 6-panel O unstructured O hook and loop strap closure in back for winter ball cap O adjustable plastic strap, mesh back for summer ball cap

Custom Characteristics:

O Special purpose – FWS logo embroidered on front (winter) O YCC – YCC logo embroidered on front (summer) YCC – YCC logo embroidered with Youth Leader on front (summer) O Volunteer – Volunteer logo embroidered on front (summer and winter)

Size Characteristics:

O unisex O adjustable, one size

UNIFORM COMPONENT SPECIFICATIONS

Special Purpose Cloth Nametag

Cloth nametag

Performance/work environment characteristics:

O Worn in an indoor/outdoor environment

Color Characteristics:

O Light brown with dark brown border O Dark brown lettering

Style Characteristics:

O Rounded edges O First initial, last name shall be embroidered in block lettering using brown thread

Size:

O One size

U.S. FISH AND WILDLIFE SERVICE

LS Navy Volunteer Shirt

GENERAL DESCRIPTION

The garment is a work shirt with banded button-down collar, mitered breast pockets and embroidered nameplate eyelets with reinforcement.

Gender: Male, Female

SALIENT CHARACTERISTICS

Components

* Basic Material: The material shall be 6 oz. per sq. yd., and 100% cotton.

* Buttons: There shall be 7 buttons with vertical button holes.

General Instructions

* Collar: Two-piece, lined, banded, topstitched, button down with contrasting inside collar band.

* Pockets: One button-thru hex style pocket with double needle topstitching and diagonal bartacks at top corners. Finished dimensions are 5 ½” wide by 5 ½” length.

* Mainseams: Sleeve seams sewn with 4-thread 3/8” safety stitching. Side seams sewn with 4-thread ¼” safety stitching. Shoulder join sewn with single needle and turned so stitching is concealed.

* Hem: Fish tail shaped bottom with 3/16” double turned hem.

* Sleeves and Cuffs: Long sleeve with 2-needle topstitch. 2-piece, lined cuff with

2 pleats, placket, and 2 buttons with one buttonhole closure.

* Other: Separate 2-piece, topstitched yoke with contrasting inside yoke and collar band. Tailored sleeve placket box pleat back double needle armhole.

Oversize fit.

* Customization: An official U.S. Fish & Wildlife Volunteer Embroidery shall be applied to the left upper front of the garment.

Sizes: RG XS-4XL

LN XS-4XL

Sales Spec Creation Date: 03.15.10 AS Date Edited:

Brown LE Dress Trousers

Gender: Male, Female

The garment shall be a plain front trouser with quarter top front pockets and hip pockets with flaps. Pants shall have a stripe down the outside seam.

SALIENT CHARACTERISTICS

Components

* Fabric Content & Color: Fabric shall be Brown 100% Polyester. Striping shall be

Black 100% Polyester.

* Pockets: The front pocket opening shall be a approximately 6 1/2” and shall be approximately 6" deep from the bottom of the opening. They shall be stitched, turned, and restitched. The inside front pocket facing shall be a separate piece of self material finishing approximately 1 1/4” wide. The back pockets shall have an opening of approximately 5 1/2” and shall be approximately 6" deep. Sizes 29 and smaller shall have an opening of approximately 5.” They shall be finished on the outside with an exposed top and bottom cord. The left pocket shall have a tab that buttons. The front pockets shall each have a straight bartack and each back pocket shall be bartacked with a triangular bar tacking machine.

* Waistband: The waistband shall be approximately 2” wide and shall close with a hook and eye. The eye shall be bartacked for stability. A piece of waistband stiffener, approximately 3/4” in width, shall be sewn into the top of the waistband to prevent rollover. The trousers shall be made with a continuous closed waistband. The waistband shall be set on, and shall be stitched below the lower edge through the outer fabric and the waistband curtain.

The inner waistband shall be composed of a one-piece elastic web. This web shall contain a blend of 42% Nylon / 20% Polyester / 14% Neoprene Rubber (3 strands) / 6% Lycra / 18% Cotton. The elastic web shall be constructed so that the cotton content of the band is in the upper 11/8” portion where the pressure of the belt would require the wicking properties of cotton close to the body to maintain comfort. The remainder of the band will be woven with an open mesh construction to promote breathability in the hip area. Additionally, the web shall have 35% stretch and be approximately 3” wide. The web shall be sewn at the top and at the bottom waistband seams which will reduce its stretch in the upper area to allow for a comfortable fit at the waist when bending or sitting. There shall be three rows of exposed rubber woven into the center off the web.

* Inside Trim: The right fly and crotch linings shall be the same fabric and color as the waistband curtain. The right fly lining shall be sewn to the left fly below the zipper. The

Sales Spec Creation Date: 03.15.10 AS crotch lining shall be serged to each front. A separate French fly made of the outer fabric shall be sewn to the inside right fly.

* Stripe: The stripe shall be applied to each leg over the out seam. Stripe shall finish approximately 1” wide.

* Belt Loops: There shall be approximately five (5) belt loops on waist sizes 30 and down, approximately seven (7) belt loops on waist sizes 31 - 48, and approximately nine

(9) on sizes 50 and larger. Each loop shall be approximately 3/4” wide, of double thickness, and stitched on the face side with a two needle machine. Except for the center back loop, which shall be tacked on, all loops shall be sewn into the bottom of the waistband and into the rocap. They shall accommodate a belt that is approximately 1 5/8” wide.

* Zippers: The trousers shall be closed with a brass ratcheting zipper. The inside left fly will be reinforced with under the zipper stitching. A straight bartack shall be sewn through from the outside of the garment to the inside at the bottom of the fly. It shall be sewn through the zipper tape, the right and left fly, and the right fly lining. The right and left fly shall be joined by an additional bar tack located below the bottom zipper stop on the inside of the trouser.

* Buttons & Snaps: One 22 ligne melamine button shall be used for the French Fly tab and one each for the left hip pocket tab.

Stock Sizes: RG 28 – 54

- 1 -

Sales Spec Creation Date: 05.17.13 AS Date Edited:

U.S. FISH & WILDLIFE SERVICE

Brown BDU Pant

The garment shall be a cargo-style pant with a zip-fly and snap waist closure.

* Fabric Content & Color: The pant fabric shall be 65% polyester/ 35% cotton ripstop, and the color shall be brown.

* Vendor Style Description:

• Slider waistband with snap closure.

• Extra deep front pockets.

• 2 knife/accessory pockets.

• 2 cargo pockets with hook & loop closure and bellowed side gussets.

• 2 internal magazine compartments in each cargo pocket.

• Cell phone/magazine pocket.

• Double reinforced knee with built in knee pad pockets.

* Customization: N/A

Sizes: Maintain a Stock and/or Non-stock size range that will adequately meet customer needs.

U Brown Outdoor Vest – General Employee

Gender: Unisex

The garment shall be a dark brown duck outdoor work vest.

* Basic Material: The material shall be 100% cotton or blended fabric suitable for outdoor conditions. The color shall dark brown.

Detail Design Characteristics

* Features: The garment shall have polyester fill (or equal), high wind collar, two front hand-warmer pockets, straight bottom with kidney warmer flap, and double stitched seams.

* Customization: An official U.S. Fish and Wildlife emblem shall be sewn on the left upper front chest. The emblem shall be attached with inconspicuous stitching using thread closely matching the emblem background color.

Sizes: Maintain a Stock and Non-stock size range that will adequately meet customer needs.

U Navy Coaches Jacket

Navy, Lined Coach’s Jacket.

* Basic Material: 100% Nylon Taffeta

* Lining: 100% Polyester Brushed Tricot

Detail Design Characteristics

* Construction Details:

• Snap Front

• Raglan Sleeves

• Reinforced Slash Front Pockets

• Elastic Cuffs

• Open Bottom with Drawcord

• Water Resistant

Sizes: S - 3XL

U.S. Fish and Wildlife Service Uniform Components Specifications

U Brown Work Jacket

General Description: The garment shall be a dark brown duck work jacket.

Salient Characteristics

Components: Basic material – the material shall be 100% cotton or blended fabric suitable for outdoor conditions. The color shall be dark brown.

Detail Design Characteristics

Features: The garment shall have a polyester flannel heavyweight lining (or equal), attached quilted flannel hood with drawstrings, two font hand-warmer pockets, rib knit cuffs and waistband, and triple stitched seams.

Customization: An official U.S. Fish and Wildlife badge emblem shall be sewn on the left sleeve at shoulder. The emblem shall be attached with inconspicuous stitching using thread closely matching the emblem background color.

Sizes: Maintain a stock and non-stock size range that will adequately meet customer needs.

- 1 –

Sales Spec Creation Date: 03.08.10 AS

Brown LE Dress Jacket

Lot #: FS4001B

Gender: Male, Female

GENERAL DESCRIPTION

The style of the garment is known as an Ike Jacket. It shall be single breasted, waist length, with a peak lapel collar and a bi-swing back. It shall fasten with four button/buttonhole closures. It shall have X-stitched epaulets and two breast pockets. The jacket shall be fully lined.

SALIENT CHARACTERISTICS

Components

* Fabric Content & Color: The shell fabric shall be 100% Polyester. The lining fabric shall be 100% Polyester.

* Front: The front shall fasten with four-button/buttonhole closures. The buttons shall be official U.S. Army, Defense Guard gold, 36 Ligne, shank style buttons.

The buttons shall be placed through 1/4” diameter, round sewn eyelets and secured with a washer and an O-Ring. (The O-Rings allow the buttons to be removed when the jacket is cleaned.) The O-Rings shall be attached to the buttons between the outer body fabric and the inside facing so that they do not show on the inside of the jacket. (There shall be an opening on the inside of the jacket that allows access to the interior of the jacket for button removal.) The buttonholes shall be keyhole style and shall be reinforced with gimp. The jacket shall fasten left over right.

There shall be two pleated style pockets with scalloped flaps located on each front panel.

There shall be two round sewn eyelets with drilled centers, horizontally spaced, located above the right breast pocket flap. These eyelets shall accommodate a nameplate. The eyelets shall be 1/4” in diameter. They shall be spaced approximately 1 7/8” apart, center to center. The bottom of each eyelet shall be placed approximately 1/2” above the top of the right breast pocket flap, centered.

There shall be two round sewn eyelets with drilled centers, vertically spaced, located above the right breast pocket flap. These eyelets shall accommodate a wingpin. The eyelets shall be 1/4” in diameter. They shall be spaced 1 1/4” apart, center to center. The bottom of the lower eyelet shall be placed approximately 1 1/8” above the top of the left breast pocket flap, centered.

- 2 –

There shall be two round sewn eyelets with drilled centers, horizontally spaced, applied to a self-fabric badgetab, and located above the left breast pocket flap.

The bottom of the badgetab shall be placed approximately 1/2” above the top of the left breast pocket flap, centered.

* Back: The back shall be a two-piece, bi-swing style. There shall be a seam down center back. There shall be one pleat on each back panel. The pleats shall be sewn into the shoulder seam and the waistband seam. The outer edge of each pleat shall be topstitched at approximately 1/4” margin. The pleat depth shall measure 1 1/2” from top to bottom. The pleat shall be tacked approximately 3” below the shoulder seam and 4” above the waistband seam with a single bartack.

* Pockets: There shall be two pleated breast pockets with scalloped flaps located on each front panel. The pockets shall be constructed out of body fabric and shall be lined with lining fabric. The pockets shall have a center pleat that measures approximately 1 1/4” wide. The bottom corners of each pocket shall be rounded. The top edge of each pocket shall be bound with lining fabric. The pockets shall be set to the jacket with single-needle topstitching. The pockets shall measure approximately 5 3/8” wide by approximately 5 5/8” deep.

The flaps shall be constructed out of body fabric and shall be lined with lining fabric. They shall be stitched, turned, and single-needle topstitched around three edges; each shorter end and the lower scalloped edge. The single-needle topstitching shall have a stitch margin of approximately 1/4.” The flaps shall be set to the jacket with a single-needle topstitch. The flaps shall measure approximately 5 5/8” wide by approximately 2 1/2” tall at the edges and approximately 3” tall at the center. There shall be a single keyhole buttonhole (placed vertically) in the center of each flap. The round portion of the buttonholes shall be drilled. There shall be an official U.S. Army, Defense Guard gold, 25 Ligne, shank style button placed through each 1/4” diameter drilled hole. Buttons shall be secured to each flap with a washer and an O-Ring. The buttonholes shall be reinforced with gimp.

* Sleeves: The sleeves shall be two-piece style. The sleeves shall have a hem allowance of at least approximately 1 1/4.”

* Collar and Lapel: The collar shall be constructed from two layers of body fabric and shall be interlined with fusible interfacing. The collar shall be attached to a back stand. The collar shall measure approximately 2” tall at center back. The collar points shall measure approximately 1 1/2” long. The outer edge of the collar and the collar points shall be single-needle topstitched. The under collar shall be constructed from pre-padded under collar cloth, that shall be black in color.

The peak of the lapel shall measure approximately 2 1/2” long, thus measuring approximately 3/4” longer than the collar point. The open notch between the collar point and the lapel shall not measure more than 1/8”. The lapel shall break approximately 1” above the 1st button.

- 3 –

* Epaulets: There shall be non-functional epaulets, constructed from two layers of fabric, centered over each shoulder seam. They shall be stitched, turned, and single-needle topstitched and shall be interlined with fusible interfacing. The single-needle topstitching shall have approximately a 1/4” stitch margin.

Epaulets shall be inserted into the armhole seam. They shall be X-stitched at the armhole end and tacked down at the neck end. The epaulets shall taper, measuring approximately 2” at the armhole edge and approximately 1 1/4” at the neck edge. The length of the epaulet shall be dependent on the shoulder seam length and shall grade as the jacket increases/decreases in size. The neck edge of the epaulet shall lie flush with the neck to collar seam. There shall be a single keyhole buttonhole (placed parallel with the long edges) located in the center of each epaulet. The round portion of the each buttonhole shall be drilled. There shall be an official U.S. Army, Defense Guard gold, 25 Ligne, shank style button placed through each 1/4” diameter drilled hole. Buttons shall be secured to each epaulet with a washer and an O-Ring. The buttonholes shall be reinforced with gimp.

* Waistband: The bottom of the jacket shall have a waistband. The band shall be a one-piece style, folded. It shall be interlined with fusible interfacing. The band shall have a single, concealed button/buttonhole closure. There shall be a 36 Ligne, 4-eye button, that is black in color, located on the underside of the left front. It shall fasten to a corresponding keyhole buttonhole located on the right front. There shall be a seam in the waistband located at center back. The seam shall line up with the center back seam of the joined back panels. The top and bottom edges of the waistband shall be single-needle topstitched. The single-needle topstitching shall have approximately a 1/4” stitch margin. There shall be an elastic insert added to each side of the waistband. The finished waistband shall measure approximately 2 1/8” wide.

* Inside Detail: The inside front panels shall have facings constructed from body fabric. They shall be interlined with fusible interfacing. There shall be an opening in the lining-to-facing seam on the right side for washer and O-Ring access. The opening shall measure approximately 6 1/4” wide. The opening shall begin approximately 1 1/2”above the top of the waistband. Each end of the opening shall be bartacked.

There shall be a welted pocket on each inside front panel. The welts shall measure 3/8” wide and shall be constructed out of body fabric. The pocket openings shall measure approximately 5” wide by approximately 7 5/8” deep.

The welted pockets shall be inserted into the facing to lining seam. The edge of the welt closest to the side seam shall be bartacked. The pocket bags shall be constructed out of body fabric and shall be double tipped.

There shall be a reinforcement patch sewn above each welted pocket, from armhole seam to lining/facing seam. The patch shall be approximately 3 1/4” wide. The patch shall be constructed from body fabric and shall be attached on

- 4 – the inside of the lining. The patch’s purpose is to reinforce the lining fabric as nameplates and badges are pinned to the jacket.

The jacket shall have sweat shields. They shall be constructed from body fabric and shall be attached in the bottom of the armhole seam at the side seam. The shield shall be half-moon shaped. The outer edge of the shield shall be bound with lining fabric. At the widest point (measured vertically) the patch shall measure approximately 2 ¼” wide.

There shall be a hanger loop located at center back. The loop shall be constructed from 1/4” sourtache braid. The loops shall be inserted into the lining to neck seam. The finished loop (folded in half) shall measure approximately 1 1/2” long.

The center back shall have a pleat. The pleat shall measure approximately 1” deep at the neck and shall taper to nothing at the waistband.

* Size Tag & Care Instructions: Each jacket shall have a sewn in woven label.

There shall also be a printed label with care instructions and each coat will be marked with lot number, size, country of origin, and fiber content.

* Customization: There shall be an official U.S. Fish and Wildlife emblem EM1842 attached to the right sleeve, approximately 1 1/4” below the sleeve set seam, finished. There shall be an official U.S. Fish and Wildlife emblem EM1842 attached to the left sleeve, approximately 1 1/4” below the sleeve set seam, finished. The sleeve emblems shall be attached to the body fabric only. The thread used for attachment shall match the merrowed edge thread color on the emblem.

Stock Sizes: SH 34 - 50

RG 34 - 54

LN 38 - 54

XLN 40 - 54

U Navy Volunteer Vest

GENERAL DESCRIPTION

The garment shall be a straight, non-tapering vest with a four-button front, and one left upper breast pocket.

* Basic Material: The fabric shall be 65% Polyester / 35% Cotton. The color shall be Navy.

* Front: Left and right lower front edges shall be cut away, and have a slight curve. The front edges and neck shall be bound with a self-fabric that finishes ½" wide. There shall be an approximately 1 ½” wide facing along the inside of each front edge. The facing shall taper to nothing at the hem and approximately 3” above the top button/buttonhole closure. The edges of the facings shall be serged to finish the edge.

* Pockets: The left upper breast pocket shall be a spade, patch style pocket. The top of the pocket shall be hemmed with a 5/8” double turned hem and single needle topstitched at an approximately ½” margin. The pocket shall be edge-stitched to the vest on both sides and the bottom. There shall be an approximately 1 ¼” wide pencil stall on the inside edge of the pocket.

* Armhole: The armhole shall be bound with a self-fabric that finishes approximately ½" wide.

* Bottom: The lower edge of the vest shall be hemmed with an approximately 5/8” single turned hem, topstitched at an approximately ½” margin. The raw edge of the hem shall be serged to finish the edge.

* Stitching: Side and shoulder seams shall be approximately 3/8” safety stitched. The outer edges of the facings shall be serged.

* Customization: A small official U.S. Fish & Wildlife Service Volunteer emblem shall be sewn on the left breast, approximately ½” above the upper left pocket.

Sizes: RG S-2XL

U Khaki Field T-Shirt

Crew neck with matching neck and sleeve trim. Sleeve has an approximately 7/8” hem and neck has ribbed collar.

Sample Size: All measurements are based on a sample size RG-L.

Components

* Basic Material: The material shall be 100% Cotton, Jersey knit, Sand color

General Instructions

* Stitching: Seamless body construction with hemmed sleeves and bottom.

Polyester/cotton thread used in all sewing operations. Collar shall be attached by two-needle or taped over-edge construction. U.S. Fish and Wildlife logo shall be silk-screened in dark brown on left upper front.

* Customization: An official U.S. Fish and Wildlife emblem screen print shall be applied to the center of the left upper front pocket. The screen print shall be one color, Black.

Sizes: S – 3XL

SS Black Knit Polo Shirt

The knit shirt shall have a three button front, lined placket, and over-sized fit. The knit shirt shall be wrinkle resistant. Sleeves shall be short set-in with rib knit cuffs. There shall be no chest pockets.

* Basic Material: The fabric is to be 50% Cotton/50% Polyester, 6.4 oz. Pique knit. This fabric shall be wrinkle resistant and shrink resistant.

* Thread: All thread shall be DTM.

General Instructions

* Stitching: All main, shoulder, and side seams shall be set w/ 3/16” gauge stitching. Tape inserted into shoulder seams.

Detail Design Characteristics

* Collar: The collar shall be rib knit, NO-CURL, and dyed to match.

* Sleeves: The sleeves shall be short set-in with 1” rib knit cuffs.

* Placket: The placket shall be three tortoise shell button front, lined, finished 6

½” length & 1 ½” wide.

* Hem: The bottom shall have a straight hem, single turned, ¾.”

* Customization: The U.S. Fish and Wildlife Service (FWS) logo ELE581 shall be embroidered on left upper front.

Sizes: XS to 3XL

U Khaki Fire Management T-Shirt

The garment shall be a unisex khaki t-shirt.

• 100% Cotton

• Seamless Collar

• No Pocket

* Customization: An official U.S. Fish and Wildlife emblem screen print shall be applied to the left upper front. The screen print shall be one color, Black.

Sizes: Maintain a Stock and/or Nonstock size range that will adequately meet customer needs.

LS Light Blue Polo

The knit shirt shall have a three button front with a straight bottom. Sleeves shall be long with rib knit cuffs. There shall be no chest pockets.

* Basic Material: The fabric is to be 60% Cotton/40% Polyester, 6.7 oz. pique knit.

* Thread: All thread shall be DTM.

* Collar: The collar shall be rib knit and dyed to match.

* Sleeves: The sleeves shall be long with rib knit cuffs.

* Placket: The placket shall be 3 button front.

* Customization: The U.S. Fish and Wildlife Service (FWS) logo EL7306 shall be

Sizes: S to 3XL

LS Light Blue Polo

The knit shirt shall have a three button front with a straight bottom. Sleeves shall be long with rib knit cuffs. There shall be no chest pockets.

* Basic Material: The fabric is to be 60% Cotton/40% Polyester, 6.7 oz. pique knit.

* Thread: All thread shall be DTM.

* Collar: The collar shall be rib knit and dyed to match.

* Sleeves: The sleeves shall be long with rib knit cuffs.

* Placket: The placket shall be 3 button front.

* Customization: The U.S. Fish and Wildlife Service (FWS) logo EL7306 shall be

Sizes: S to 3XL

U SS Birch YCC T-Shirt

The garment shall have short sleeves and a crew neck with dyed to match neck rib knit trim.

Sample Size: All measurements are based on a sample size Medium.

Components

GENERAL DESCRIPTION:

* Basic Material: The material shall be 100% Cotton, 6.0 oz/sq. yd. Jersey knit, Heather Gray in color.

* Stitching: Body construction shall be tubular, and shall not have side seams. The sleeves and bottom of the shirt shall be hemmed. Polyester/cotton thread used in all sewing operations. Collars shall be attached with two-needle construction. Back neck and shoulder seams shall be taped. Sleeves and bottom edge shall have a 7/8” double needle cover-stitched hem.

* Customization: The YCC logo shall be screen printed on the left upper chest and on the back of the shirt in blue and green. Front screen print shall be approximately 3.75” wide and approximately 3.75” tall. Back screen print shall be approximately 10.25” wide and approximately 10.25” tall.

Sizes: RG S-3XL

U SS Navy Volunteer T-Shirt

The T-shirt shall have short sleeves and a crew neck with dyed to match neck rib knit trim.

Sample Size: All measurements are based on a sample size Large.

Components

* Basic Material: The material shall be 100% Cotton, 6.0 oz/sq. yd. Jersey knit, Navy in color.

* Stitching: Body construction shall be tubular, and shall not have side seams. The sleeves and bottom of the shirt shall be hemmed. Polyester/cotton thread used in all sewing operations. Collars shall be attached with two-needle construction. Back neck and shoulder seams shall be taped. Sleeves and bottom edge shall have a 7/8” double needle cover-stitched hem.

* Customization: Fish and Wildlife Volunteer logo shall be screen printed on the left upper chest of the shirt. This screen print shall be approximately 3” wide by approximately 3.5” tall.

Sizes: RG S-3XL

U Brown Leather Work Belt

Basket weave belt shall be 1 ½” wide and dark brown, with a brass buckle.

* Basic Material: The belt shall be 10-12 ounces ion weight and shall be 100% leather.

* Buckle: The buckle shall be brass.

* Belt: The front of the belt shall be imprinted with a basket weave pattern.

Sizes: RG-26 to RG-52.

U Brown Boot Sock

The accessory shall be a medium weight mid-calf boot sock. The color shall be brown.

• Content: 70% polypropylene, 28% nylon, 2% spandex.

• Care: Machine wash inside out in warm water, no bleach. Tumble dry low. Do not dry clean.

• Temperature: Moderate/Warm Weather.

• Memory-knit construction.

• Contoured rib top.

• Spandex compression zones.

• Mesh panels.

• Cushioned shin.

• Multifilament yarn construction.

Sizes: Maintain a Stock and/or Non-stock size range that will adequately meet customer needs.

- 1 -

Sales Spec Creation Date: 05.16.13 AS Date Edited:

U Charcoal SPO Ballcap

The item shall be an enclosed baseball style cap with six piece crown contour shape and direct embroidery.

Fabric Content & Color: The hat fabric shall be 100% cotton, and the color shall be charcoal.

* Vendor Style Description:

• Heavy weight fabric.

• Low profile.

• 6 panel.

• Unstructured.

• Adjustable.

• Hook and loop closure in back.

* Customization: An official U.S. Fish and Wildlife shield logo shall be direct embroidered on the center front.

Sizes: Adjustable, One Size

U Brown Hiking Sock

GENERAL DESCRIPTION

The accessory shall be a heavy weight hiking sock. The color shall be dark brown with white/brown heel and toe.

Vendor Style Description:

• 88% Acrylic / 10% Stretch Nylon/ 2% Spandex.

• Medium Density Padded Foot.

• Welt Top.

• Arched Support.

• Padded Heel and Toe.

Sizes: Maintain a Stock and Non-stock size range that will adequately meet customer needs.

F Black Soft Shell Fleece Jacket

Gender: Female

The garment shall be a black soft shell fleece jacket.

Vendor: Alpha Broder

Vendor Style Number: 78034 – Black 703

• 3-layer performance stretch soft shell

• Body: 7.8 oz., 97% polyester/3% spandex bonded with 100% polyester fleece

• Lining: 100% polyester tricot

• Fleece lined chin guard

• Left sleeve vertical reverse coil zipper pocket

• Articulated elbows

• Lower front pockets with contrast zipper and zipper garages

• Thermal retention shock cord drawstring at hem

• Seamless Shoulder

Customization: An official U.S. Fish and Wildlife logo shall be embroidered on the left upper front chest.

M Black Soft Shell Fleece Jacket

Gender: Male

The garment shall be a black soft shell fleece jacket.

Vendor: Alpha Broder

Vendor Style Number: 88099 – Black 703

• 3-layer performance stretch soft shell

• Body: 7.8 oz., 97% polyester/3% spandex bonded with 100% polyester fleece

• Lining: 100% polyester tricot

• Fleece lined chin guard

• Left sleeve vertical reverse coil zipper pocket

• Articulated elbows

• Lower front pockets with contrast zipper and zipper garages

• Thermal retention shock cord drawstring at hem

Customization: An official U.S. Fish and Wildlife logo shall be embroidered on the left upper front chest.

Special Purpose T-Shirt

Short-sleeve cotton T-Shirt

Performance/Work Environment characteristics:

O to be worn as an undergarment or in an outdoor environment O durable O fade resistant O lightweight 100% cotton

Color Characteristics:

O Volunteer - navy blue with volunteer logo in white O Fire Management – tan/khaki with Service Logo in black; Fire Management below in black O YCC – heather gray with YCC logo in blue and green

Style Characteristics:

O crew neck O hemmed sleeves and bottom O logo and lettering silk screened on left upper front

Customization Characteristics:

O Volunteer – Volunteer logo in white O Fire Management – Service logo in black with Fire Management in black block letters below O Field – Service logo in black O YCC – YCC logo on left upper front and YCC logo on back

Size Characteristics:

O XS – 3XL

Special Purpose Volunteer Shirt

Long-sleeve shirt

Performance/Work Environment Characteristics:

O to be worn in an indoor or outdoor environment O fade resistant O wrinkle resistant O UV protection O light weight breathable material O wicking capabilities

Color Characteristics:

O navy blue O Volunteer logo in white

Style Characteristics:

O collar with or without buttons O cuffed O front pocket with or without button O Volunteer logo embroidered above pocket

Size Characteristics:

O male and female O female sizing tailored O female – XS – 3XL, regular and long O male – S- 4XL, regular and long

Special Purpose Volunteer Polo

Short-sleeve and long-sleeve polo shirt

Performance/Work Environment Characteristics:

O to be worn in an indoor and outdoor environment O blend O wrinkle-free O UV protection O wicking capabilities O light weight O fade resistant O no shrinkage

Color Characteristics:

O light blue with Volunteer logo

Style Characteristics:

O Volunteer logo embroidered on left upper front O up to 3 buttons on placket O color is ribbed knit O sleeves on both short and long sleeve will be ribbed cuffed

Size Characteristics:

O male and female O female tailored

O XS – 3XL

UNIFORM CONPONENTS SPECIFICATIONS

Special Purpose Volunteer Vest

Vest

Performance/Work Environment Characteristics:

O to be worn in an indoor or outdoor environment O durable

Color Characteristics:

O Navy blue O volunteer emblem

Style Characteristics:

O button down or zip O cotton or fleece O one or two outside pockets O inside pocket O small volunteer logo on upper left

Size Characteristics:

O S – 3XL

Special Purpose Volunteer Windbreaker

Long-sleeve windbreaker

Performance/Work Environment Characteristics:

O to be worn in an outdoor setting O water resistant/repellent O wind resistant O durable

Color Characteristics:

O navy blue O Volunteer patch on right sleeve

Style Characteristics:

O lined O open bottom with drawstring cord O elastic or Velcro cuffs O front pockets O rust proof snap front O hip length

Size Characteristics:

O S-4XL