Amend_003_Attach_4_USACE_non_shared_Specifications.pdf

UNIFORM COMPONENT SPECIFICATIONS

Hat Castle Pin, Customized USACE (Spec 001)

GENERAL DESCRIPTION

Item is a customized USACE castle ensign shaped hat pin.

PERFORMANCE/WORK ENVIRONMENT SALIENT CHARACTERISTICS

• Worn on the straw or felt campaign ranger hat in an indoor and outdoor environment

• Shall have a two post pin back with grabbers to prevent slipping

COMPONENT

• Gold plated brass hat pin in shape of the U. S. Army Corps Of Engineers castle ensign with relief work

• Castle to be 1 1/8 inch wide and 3/4 inch high

• Gold electroplated to high gloss finish and polished border and center motif

• Gold plating must be durable and not wear or flake off

PRODUCTION SAMPLE

• Sample must be approved by the USACE COTR

UNIFORM COMPONENT SPECIFICATIONS (Spec 002) Tie Bar, Customized USACE

Item is customized tie bars, men’s and women’s with USACE castle ensign.

• Worn on the clip-on and four-in-hand tie in an indoor and outdoor environment

• Separate design to fit slide onto male and female style shirts

COMPONENT/CUSTOMIZATION

• Gold plated brass tie bar with U. S. Army Corps Of Engineers castle ensign with relief work

• Castle ensign to be 3/8” wide permanently affixed to tie bar

• Tie bar to be industry standard width and length

• Thickness minimum 1/32 inch

• Gold electroplated to have high gloss finish and polished border and center motif highlights

• Gold plating must be durable and not wear or flake off

• Sample must be approved by USACE COTR

MEN’S

WOMEN’S

UNIFORM COMPONENT SPECIFICATIONS (Spec 003) Tie Tac, Customized USACE

Item is a customized tie tac with USACE castle ensign.

• Worn on the clip-on and four-in-hand tie in an indoor and outdoor environment

• Shall have a pin back with grabber to prevent slipping

• Shall have minimum ½ inch chain and bar attachment

COMPONENT/CUSTOMIZATION

• Gold plated brass tie tac in the shape of the U. S. Army Corps Of Engineers castle ensign with relief work

• Castle to be ¾ inch wide and 1/2 inch high

• Gold plated to high gloss finish and polished border and center motif highlights

• Gold plating must be durable and not wear of flake off

• Sample must be approval by USACE COTR

U.S. Army Corps of Engineers UNIFORM COMPONENT SPECIFICATIONS (Spec 004)

Unisex, Red Volunteer Vest

Sample Size: All dimensions are based on size L.

GENERAL DESCRIPTION

The garment is a red poly/ cotton basic work vest with 3 pockets: 2 on the lower front, and 1 on the left upper front chest.

Gender: Unisex

SALIENT CHARACTERISTICS

Components

* Basic Material: The material shall be 65 Polyester/ 35 Cotton 2 x1 left hand twill, 7.5 oz/ yard sq.

* Buttons: The buttons shall be 20 Ligne, dyed to match buttons

* Emblem: The official US Army Corps of Engineers Volunteer Emblem shall be sewn on the left upper front chest, approximately ½” above the left upper pocket.

Detail Design Characteristics

* Basic: Vest style fronts with ½” bias binding continuous around the front opening, and the armholes.

* Closure: The center front has a 4 button/buttonhole closure with ¾” horizontal buttonholes. The spacing between the buttons shall be 2 ¾.”

* Pockets: There are 2 lower 4 ½” square patch pockets with diagonal bartacks at the corners.

There shall be 1 upper left chest 4 ½” square pocket.

Sizes: Stock: S – 3XL

U.S. ARMY CORPS OF ENGINEERS

UNIFORM COMPONENTS SPECIFICATIONS (Spec 005a-c)

Unisex, Short Sleeve Volunteer Polo

Sample Size: All dimensions are based on size SS L.

GENERAL DESCRIPTION

The garment is short sleeve polo with dyed to match rib knit collar and sleeve welts. Available in red, white, and tan.

Gender: Unisex

SALIENT CHARACTERISTICS

Components

* Basic Material: The material shall be 60 Polyester/ 40 Cotton pique knit 5.5 oz/ yard sq. fabric

* Buttons: The buttons shall be 17 Ligne, woodgrain buttons

* Labels: See general reference and requirements sheet.

Detail Design Characteristics

* Mainseams: The Sideseams shall be serged and clean finished; the shoulder seams shall be reinforced with tape. The bottom hem shall be blind serged.

* Closure: The center front placket shall have 3 wood grain buttons with top horizontal buttonhole and the other two are vertical 1 ½” wide x 6 ½” long clean finished placket with horizontal bar at placket bottom

* Cuffs: The cuffs shall be dyed to match rib knit cuffs.

* Emblem: The official US Army Corps of Engineers Volunteer Emblem shall be sewn on the left upper front chest, approximately 2 ½” from center front, and placed centered between the second and third buttons on the placket.

Sizes: Stock: S – 3XL

UNIFORM COMPONENTS SPECIFICATIONS

USACE VOLUNTEER HOODED SWEATSHIRT (UNISEX)(Spec 006)

The garment is a basic hooded sweatshirt with full zip closure

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• The fit shall be comfortable and allow for full range of motion

• The fabric content shall be a performance material

• The fabric weight shall be suitable for an indoor and outdoor environment

• The fabric shall be machine-washable

• The fabric shall resist fading

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

• Garment shall have full front zipper closure and pockets

COLOR CHARACTERISTICS

• Red

STYLE CHARACTERISTICS

• Pockets: Should have split muff pocket on lower front

• Collar and Sleeve Welts: Rib knit dyed to match shirt color

CUSTOMIZATION

The garment shall have an official U.S. Army Corps of Engineers Volunteer Emblem patch sewn centered on the left chest

SIZES

S-5XL

Volunteer Ball Cap, Summer, USACE (Unisex)(Spec 007a-b)

Garment is an open mesh baseball style cap

• Worn in an outdoor work environment

• The fit shall be comfortable

• The fabric content shall be a durable performance material

• The fabric weight shall be suitable for all weather conditions

• The fabric shall be colorfast

• The fabric shall resist stains

• Fabric shall be an open mesh

• Red

• Tan

STLYE CHARACTERISTICS

• Rear Outlet: Should be folded under and taped down

• Backstrap: Should be plastic tape to match twill material with holes and pins to snap for secure closure

• USACE Volunteer patch sewn or embroidered centered ½ inch above bill

M, R, XL

Volunteer Ball Cap, Twill, USACE (Unisex)

Garment is an enclosed baseball style cap

• Worn in an outdoor work environment

• The fit shall be comfortable

• The fabric content shall be a durable performance material

• The fabric weight shall be suitable for all weather conditions

• The fabric shall be colorfast

• The fabric shall resist stains

• Body: Beige

• Bill: Black

STLYE CHARACTERISTICS

• Rear Outlet: Should be folded under and taped down

• Backstrap: Should be beige fabric, sewn into a strip that is fastened with brass buckle and sewn into bottom left and right rear panels

• USACE Volunteer patch sewn on or embroidered centered ½ inch above bill

M, R, XL

U.S. ARMY CORPS OF ENGINEERS

UNIFORM COMPONENT SPECIFICATIONS (Spec 009a-b)

Red Plastic Volunteer Nameplate Magnetic Red Plastic Volunteer Nameplate Pin Back

GENERAL DESCRIPTION

Red Plastic Volunteer Nameplate– overall dimensions 3” Length x 1 ¼” Width

SALIENT CHARACTERISTICS

* Front: Red “Flat” finish plastic

* Back: White rigid vinyl plastic material.

* Logo: The Official U.S. Army Corps of Engineers logo is screened in the upper left corner. Logo shall consist of the US Army Corps of Engineer Castle and the wording “U.S. Army Corps of Engineers.”

The logo is approximately ¾” tall and 7/8” wide and placed 1/8” from the outside left edge. The word “Volunteer” is screened on the lower right hand corner and is approximately 1/8” in height and 7 /16” in width, placed ½” from right finished edge and ¼” from bottom finished edge.

* Personalization: Employee name is engraved in condensed block capital letters. Lettering in name

3/16” high, ‘020 line width, and .010 deep. Title line characters 1/8” height, .015 line width and .007 deep. Name and title are centered in space to the right of the logo.

* Fasteners: The closures are silver pin back or magnetic.

MAGNETIC

PIN BACK

LONG SLEEVE MOCK TURTLENECK (UNISEX)(Spec 0010)

The garment is a base layer mock turtleneck.

• Worn as a base layer in an indoor and outdoor work environment

• The fabric shall stretch/allow for flexibility

• The fabric weave shall be breathable, fast drying, and possess moisture wicking capabilities

• The fabric shall be anti-microbial/odor resistant

• The fabric shall be stain and snag resistant

• The fabric shall be machine washable

• The fabric shall be colorfast and resist fading, shrinking and pilling

• The fabric shall be a lightweight material

• Black

• Collar: Interlock knit, double-ply collar

• Cuffs: The cuffs should be rib knit cuffs

SIZE CHARACTERISTICS

Stock: XS – 3XL

Non-stock: XXS, 4XL, 5XL

Waist Length Parka with Detachable Hood (UNISEX) (Spec 0011)

The Bureaus’ seek consistency of style and fit in the waist length parka with detachable hood and this spec is an effort to standardize the style and fit.

The images provided below are the currently available images of waist length parka with detachable hood. With the exception of the color characteristics and customization indicated below, the waist length parka with detachable hood for each Bureau should be consistent under this specification.

The garment is a waist length parka sold with a detachable insulated hood.

Spec 0067 Detachable Hood must be able to attach to this parka, however this parka must be sold with a hood included for and is a separate specification from 0067.

• Worn as an outer layer in an outdoor work environment

• The fit shall be comfortable and allow for be full range of motion to include bending and reaching overhead

• Parka shall be fully lined and insulated

• Parka shall have a front storm flap and a two way zipper with outer snap closures

• The fabric weave shall be wind and water resistant

• The fabric shall be anti-microbial/odor resistant

• The fabric shall be stain and snag resistant

• The fabric should be machine washable

• The fabric shall be colorfast and resist fading, shrinking and pilling

• Front zippers shall be located mouth to mouth for two way movement and access up and down

• Hood shall be detachable

• Waist shall have an interior adjustable cord

• Forest Green - USACE

• Badge Tab: Reinforced with matching material and two centered reinforced eyelets for badge on left chest

• Name Tab: Reinforced with matching material and two centered reinforced eyelets for nametag on right chest

• Drawstring: Should have a concealed drawstring tunnel at the waistline, beginning and ending at the zipper tape/weather flap seams.

• Cuffs and Collar: Should be knitted cuff sewn into the lining/outer seam

• Pockets: Should have hand-warmer slash pockets on the front, at minimum one zippered patch pocket inside the breast and pockets in the side seams with secure closures

• Lining: should be sewn into the insulation batting to prevent rolling and bunching

• Side Vents: Should be closed with an inseam zipper with storm flap

• Zippers: Should have double sliders with long tabs

• Sleeves: Should be fully lined

• Hanger Loop: Should have a nylon or similar tape hanger loop sewn into the inside of the collar at center back

• Hood: Lined and insulated matching fabric with visor, drawstring front closure with cord locks and snap front closure, and snap attachments to matching placement on parka

CUSTOMIZATION

Agency Patch sewn onto top of left sleeve

SIZE CHARACTERISTICS

Men's Jackets

Size CHEST HIP SLEEVE LENGTH

S 36-38” 35-37” 33.5” M 39-41” 38-40” 34” L 42-44” 41-43” 34.8”

XL 45-48” 44-46” 35.5”

2XL 49-52” 47-49” 36.3”

3XL 53-56” 50-52” 37.0”

Women's Jackets

Size CHEST WAIST HIP SLEEVE

LENGTH

XS 31-32” 24-25” 33-35” 31.5”

S 33-35” 26-28” 36-37” 32” M 36-38” 29-31” 38-40” 32.5” L 39-41” 32-34” 41-43” 33.3”

XL 42-44” 35-38” 44-47” 34.0”

2XL 45-48” 39-42” 48-51” 34.8”

IMAGES

USACE -