Amend_0002_Attach_2_Shared_Specs_1-79.pdf

UNIFORM COMPONENT SPECIFICATIONS

100% COTTON DRESS SHIRT LS and SS (Spec 0001)

GENERAL DESCRIPTION

The Bureaus’ seek consistency of style and fit in the long and short sleeve 100% cotton dress shirts and this spec is an effort to standardize the style and fit.

The images provided below are the currently available images of each long and short sleeve 100% cotton dress shirt. With the exception of the color characteristics and customization indicated below, the long and short sleeve 100% cotton dress shirts for each Bureau should be consistent under this specification.

The garment is a 100% cotton form fitting dress shirt with two pleated breast pockets with scalloped flaps and shoulder epaulets. The shirt has military creases, a pencil slot, a shoulder emblem and badge tab, in both long and short sleeves.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn with work, dress uniform or with ceremonial dress

• The fit shall be comfortable and allow for full range of motion

• The fabric weight shall be suitable for year-round wear in an indoor and outdoor environment

• The fabric weave shall be breathable

• The fabric shall be machine-washable

• The shirt shall conform to true male sizing

• The shirt shall conform to true female sizing

COLOR CHARACTERISTICS

• Nickel Grey- NPS, USACE

• Tan- FWS, BLM

• White- USPP

• Powder Blue- USPP

STYLE CHARACTERISTICS

Components

• Linings: Should have collar and yoke linings that are compatible with the construction of the shirts.

• Thread: Sewing thread for all operations should be appropriate for the construction and purpose of the shirt and should match the shade of the body fabric.

• Buttons: Buttons should be synthetic, industry standard size for a dress shirt, of a color matching the body fabric and be resistant to burning, melting or cracking.

• Collar Stays: The collar stays should be permanent and fused or sewn to the collar lining parallel to the collar’s front edge and positioned as closely as possible to the front edge.

General Instructions

* Cutting: Collars, bands, pockets, and flaps should be cut to ensure uniformity.

* Stitching: Stitching appropriate to the construction and purpose of the shirt, and the location or application of the stitching, e.g. a lockstitch (301) or where inserting the sleeve and side closing operations, a safety stitch (516). All topstitching should be ¼” from edge. There should be 10 to 14 stitches per inch required.

* Button Holes For Two-Piece Shirt Collar: The shirt should have 7 cut buttonholes down the front. For proper appearance with clip-on tie, the stand should be fastened with one button so there should be a tie space of ¼” when collar is buttoned.

Detail Design

* Two-Piece Shirt Collar: The garment should have a two piece shirt collar. The points on the collar leaf should measure 3 ¼” in length and be topstitched ¼” from the edge. The collar leaf should be 1 ¾” from roll line to bottom edge of collar at center back. The collar stand should measure 1 5/16” at center back and be topstitched 1/16” from top and bottom edges. For proper appearance with clip on tie, the stand should be fastened with one button so that there is be a tie space of ¼” when the collar is buttoned. The collar’s interlining should be a permanent press finish of 250 weight or equal.

* Shoulder Epaulets: Shoulder epaulets should be 2” at sleeve head and tapered to 1 ¾”-1

½”. The epaulets should be stitched to the shoulder by a single needle machine forming an "X" beginning at the sleeve head and extending for approximately one-half the length of the strap. Length of epaulets should be graduated conforming to size of shirt and set not more than ½” from folded collar. Buttons attached to yokes should match shoulder epaulet buttonholes at pointed ends.

* Front for Two-Piece Shirt Collar: Each front should have a facing 2 ½” in width extending from the neckline to the bottom of the shirt, and provided by a turn under of material. The left front should contain 6 vertical buttonholes placed ¾” from the edge of the plait and be 3 ½” apart. There should be one button on the collar stand placed ¾” from edge. The button stand should be 7/8” wide and be placed on the left side of the shirt. The buttons should be securely attached to the button stand corresponding to the buttonholes on the facing.

* Badge Reinforcement: The shirt should have a 1” wide inside sling type badge holder extending from the shoulder joining seam to pocket of the left front and constructed of the basic material. Two small, uncut buttonholes should be 1 1/8” apart with the lower buttonhole approximately 1 ¼” above top of left pocket flap.

* Pocket Flaps: There should be two deep scalloped flaps, 5 7/8” wide, 2 ¼” at sides, and

2 ¾” at center. There should be a 1 ½” pencil opening through the left flap and a vertical uncut buttonhole in the center of the flap with a button sewn on top of the buttonhole.

The flaps should be topstitched 1/8” from edge and attached to the shirt front with a double row, ¼” gauge stitching. The underside of the flap should have hook and pile tape, approximately 1” long by 3/8” wide, positioned on outer points of both pocket flaps.

* Pockets: Both pockets should have 1 ½” centered pleats stitched to prevent spreading.

Pockets should be 5 ½” wide x 5 ¾” deep with bottom mitered corners. The left pocket should have a pencil slot 1 ½” from center edge. Upper hem should be ½” wide. Pockets should be topstitched 1/16” gauge with ¾” triangle tacks at upper corners. Both pockets should have an approximately 1” long by 3/8” wide piece of hook and pile tape positioned to correspond with the hook and pile tape on each outer scalloped flap point.

* Yoke & Back: The yoke should be constructed of two pieces. The outside yoke should be made of the same fabric as the outer shell of the garment and the inside yoke should be made of the lining fabric. The yoke should be 3 ½” at center back and 3 ¾” at armhole.

* Long Sleeves: Each sleeve should have a 5” long sleeve placket with a 1” wide top placket and a ½” wide bottom placket. The sleeve placket is 5” long with top and bottom facings. A vertical buttonhole should be sewn 2 ½” from top of cuff centered on top placket with matching button centered on bottom.

* Cuffs: Cuffs should be 2 ¾” in depth with rounded corners ¼” topstitching at bottom and double stitched 3/8” gauge topstitching where cuff joins sleeve. Two buttons should be centered on each cuff 1 ¼” apart with one corresponding buttonhole that is parallel with the bottom of the cuff.

* Military Creases: There should be five 1/16” sharp military creases on the shirt. There should be one crease on each front, centered vertically through pocket and flap. Spacing for military creases on shirt back should be proportionate to the size of the shirt. For lightweight fabric (4 to 6 ounces) creases must be stitched in; for heavy fabrics (10 ounce) stitches should be baked in.

* Patch: The organizations shoulder patch should be sewn securely in the center of the left sleeve with the top edge 1 ¼ to 1 ½” below the shoulder seam depending on the garment size. The patch should be sewn with matching thread and attached so that the edges do not roll-up after washing.

Men's Shirts Long or Short Sleeve

SM MD LG XL 2XL 3XL 4XL 5XL 6XL

Men's Neck Size

14/14.5 15/15.5 16/16.5 17/17.5 18/18.5 19/19.5 20/20.5 21/21.5 22/22.5

Men’s Chest Size

34-36 38-40 42-44 46-48 50-52 54-56 58-60

Sleeve Length 30/31

Sleeve

32/33

34/35

36/37

Regular

Tall

T = Tall – Talls should have 2” longer body

Women's Shirts Long or Short Sleeve

XS S MD LG XL 2XL 3XL

Women’s Size

2-4 6 8-10 12-14 16-18 20-22 24-26

Women’s Bust Size

32-33 34 35.5-36.5 37.5 -39 41-43 45-47 48.5-50

Sleeve Length

IMAGES

NPS LS “Service Dress” 100% cotton Men’s

NPS SS “Service Dress” 100% cotton Men’s

NPS LS “Service Dress” 100% cotton Women’s

NPS SS “Service Dress” 100% cotton Women’s

USACE LS “Duty” 100% cotton Men’s

USACE SS “Duty” 100% cotton Men’s

USACE LS “Duty” 100% cotton Women’s

USACE SS “Duty” 100% cotton Women’s

BLM LS “Duty” 100% cotton Men’s

BLM SS “Duty” 100% cotton Men’s

BLM LS “Duty” 100% cotton Women’s

BLM SS “Duty” 100% cotton Women’s

FWS LS “Poplin” 100% cotton Men’s

FWS SS “Poplin” 100% cotton Men’s

FWS LS “Poplin” 100% cotton Women’s

FWS SS “Poplin” 100% cotton Women’s

USPP LS “Dress” 100% cotton Men’s

USPP SS “Dress” 100% cotton Men’s

USPP LS “Dress” 100% cotton Women’s

USPP SS “Dress” 100% cotton Women’s

LONG SLEEVE DRESS SHIRT (Spec 0002)

The Bureaus’ seek consistency of style and fit in the long sleeve dress shirts and this spec is an effort to standardize the style and fit.

The images provided below are the currently available images of each long sleeve dress shirt.

With the exception of the color characteristics and customization indicated below, the long sleeve dress shirts for each Bureau should be consistent under this specification.

The garment is a form fitting dress shirt with two pleated breast pockets with scalloped flaps and shoulder epaulets. The shirt has military creases, a pencil slot, a shoulder emblem and badge tab.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn with dress uniform or with ceremonial dress

• The fit shall be comfortable and allow for full range of motion

• The fabric content shall be a performance material blend

• The fabric weight shall be suitable for year-round wear in an indoor and outdoor environment

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall be machine-washable

• The fabric shall resist fading

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

• The fabric shall provide UV sun protection

• Tan- FWS,BLM

* Stitching: Stitching appropriate to the construction and purpose of the shirt, and the location or application of the stitching, e.g. a lockstitch (301) or where inserting the the collar leaf should measure 3 ¼” in length and be topstitched ¼” from the edge. The collar leaf should be 1 ¾” from roll line to bottom edge of collar at center back. The collar stand should measure 1 5/16” at center back and be topstitched 1/16” from top and bottom edges. For proper appearance with clip on tie, the stand should be fastened with one button so that there should be a tie space of ¼” when the collar is buttoned. The collar’s interlining should be a permanent press finish of 250 weight or equal.

an "X" beginning at the sleeve head and extending for approximately one-half the length of the strap. Length of epaulets should be graduated conforming to size of shirt and set material. The left front should contain 6 vertical buttonholes placed ¾” from the edge of the plait and be 3 ½” apart. There should be one button on the collar stand placed ¾” from edge. The button stand should be 7/8” wide and be placed on the left side of the uncut buttonhole in the center of the flap with a button sewn on top of the buttonhole.

The flaps should be topstitched 1/8” from edge and attached to the shirt front with a should have a pencil slot 1 ½” from center edge. Upper hem should be ½” wide. Pockets should be topstitched 1/16” gauge with ¾” triangle tacks at upper corners. Both pockets for military creases on shirt back should be proportionate to the size of the shirt. For

Short Sleeve

SM MD LG XL 2XL 3XL 4XL 5XL 6XL

Men's Neck Size

14/14.5 15/15.5 16/16.5 17/17.5 18/18.5 19/19.5 20/20.5 21/21.5 22/22.5

Men’s Chest Size

34-36 38-40 42-44 46-48 50-52 54-56 58-60

Sleeve

T = Talls – Talls should have 2” longer body

Long or Short Sleeve

XS S MD LG XL 2XL 3XL

Women’s Size

2-4 6 8-10 12-14 16-18 20-22 24-26

Women’s Bust Size

32-33 34 35.5-36.5 37.5 -39 41-43 45-47 48.5-50

T = Talls – Talls should have 2” longer body

NPS LS “Service Dress” Men’s

NPS LS “Service Dress” Women’s

USACE LS “Duty” Men’s

USACE LS “Duty” Women’s

BLM LS “Duty” Men’s

BLM LS “Duty” Women’s

FWS LS “Poplin” Men’s

FWS LS “Poplin” Women’s

USPP LS “Dress” Men’s

USPP LS “Dress” Women’s

SHORT SLEEVE DRESS SHIRT (Spec 0003)

The Bureaus’ seek consistency of style and fit in the short sleeve dress shirts and this spec is an effort to standardize the style and fit.

The images provided below are the currently available images of each short sleeve dress shirt.

With the exception of the color characteristics and customization indicated below, the short dress shirts for each Bureau should be consistent under this specification.

The garment is a form fitting dress shirt with two pleated breast pockets with scalloped flaps and shoulder epaulets. The shirt has military creases, a pencil slot, a shoulder emblem and badge tab.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn with dress uniform or with ceremonial dress

• The fit shall be comfortable and allow for full range of motion

• The fabric content shall be a performance material blend

• The fabric weight shall be suitable for year-round wear in an indoor and outdoor environment

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall be machine-washable

• The fabric shall resist fading

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

• The fabric shall provide UV sun protection

• Tan- FWS,BLM

* Stitching: Stitching appropriate to the construction and purpose of the shirt, and the location or application of the stitching, e.g. a lockstitch (301) or where inserting the the collar leaf should measure 3 ¼” in length and be topstitched ¼” from the edge. The collar leaf should be 1 ¾” from roll line to bottom edge of collar at center back. The collar stand should measure 1 5/16” at center back and be topstitched 1/16” from top and bottom edges. For proper appearance with clip on tie, the stand should be fastened with an "X" beginning at the sleeve head and extending for approximately one-half the length of the strap. Length of epaulets should be graduated conforming to size of shirt and set material. The left front should contain 6 vertical buttonholes placed ¾” from the edge of the plait and be 3 ½” apart. There should be one button on the collar stand placed ¾” from edge. The button stand should be 7/8” wide and be placed on the left side of the uncut buttonhole in the center of the flap with a button sewn on top of the buttonhole.

The flaps should be topstitched 1/8” from edge and attached to the shirt front with a should have a pencil slot 1 ½” from center edge. Upper hem should be ½” wide. Pockets should be topstitched 1/16” gauge with ¾” triangle tacks at upper corners. Both pockets for military creases on shirt back should be proportionate to the size of the shirt. For

Short Sleeve

SM MD LG XL 2XL 3XL 4XL 5XL 6XL

Men's Neck Size

14/14.5 15/15.5 16/16.5 17/17.5 18/18.5 19/19.5 20/20.5 21/21.5 22/22.5

Men’s Chest Size

34-36 38-40 42-44 46-48 50-52 54-56 58-60

Sleeve

Long or Short Sleeve

XS S MD LG XL 2XL 3XL

Women’s Size

2-4 6 8-10 12-14 16-18 20-22 24-26

Women’s Bust Size

NPS SS “Service Dress” Men’s

NPS SS “Service Dress” Women’s

USACE SS “Duty” Men’s

USACE SS “Duty” Women’s

BLM SS “Duty” Men’s

BLM SS “Duty” Women’s

FWS SS “Poplin” Men’s

FWS SS “Poplin” Women’s

USPP SS “Dress” Men’s

USPP SS “Dress” Women’s

LONG SLEEVE WORK SHIRT (Spec 0004)

The Bureaus’ seek consistency of style and fit in the long sleeve work shirts and this spec is an effort to standardize the style and fit.

The images provided below are the currently available images of each long sleeve work shirts.

With the exception of the color characteristics and customization indicated below, the long sleeve work shirts for each Bureau should be consistent under this specification.

The garment is a work shirt with two pleated breast pockets with scalloped flaps and shoulder epaulets.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn to perform physical work primarily outdoors

• The fit shall be comfortable and allow for full range of motion

• The fabric content shall be a performance material blend

• The fabric weight shall be suitable for year-round wear in an indoor and outdoor environment

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall be machine-washable

• The fabric shall resist fading

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

• The fabric shall provide UV sun protection

• Thread: Sewing thread for all operations shall be appropriate for the construction and

• Buttons: Buttons shall be synthetic, industry standard size for a dress shirt, of a color matching the body fabric and be resistant to burning, melting or cracking .

* Cutting: Collars, bands, pockets, and flaps shall be cut to ensure uniformity.

* Stitching: Stitching appropriate to the construction and purpose of the shirt, and the location or application of the stitching, e.g. a lockstitch (301) or where inserting the from edge. There shall be 10 to 14 stitches per inch required.

the collar leaf should measure 3 ¼” in length and be topstitched ¼” from the edge. The collar leaf should be 1 ¾” from roll line to bottom edge of collar at center back. The collar stand should measure 1 5/16” at center back and be topstitched 1/16” from top and bottom edges. For proper appearance with clip on tie, the stand should be fastened with material. The left front should contain 6 vertical buttonholes placed ¾” from the edge of the plait and be 3 ½” apart. There should be one button on the collar stand placed ¾” from edge. The button stand should be 7/8” wide and be placed on the left side of the uncut buttonhole in the center of the flap with a button sewn on top of the buttonhole.

The flaps should be topstitched 1/8” from edge and attached to the shirt front with a should have a pencil slot 1 ½” from center edge. Upper hem should be ½” wide. Pockets should be topstitched 1/16” gauge with ¾” triangle tacks at upper corners. Both pockets

Short Sleeve

SM MD LG XL 2XL 3XL 4XL 5XL 6XL

Men's Neck Size

14/14.5 15/15.5 16/16.5 17/17.5 18/18.5 19/19.5 20/20.5 21/21.5 22/22.5

Men’s Chest Size

34-

38-40 42-44 46-48 50-52 54-56 58-60

Length 30/31

Length 32/33

Length 34/35

Length 36/37

Length Tall

Long or Short Sleeve

XS S MD LG XL 2XL 3XL

Women’s Size

2-4 6 8-10 12-14 16-18 20-22 24-26

Women’s Bust Size

32-33 34 35.5-36.5 37.5 -39 41-43 45-47 48.5-50

NPS LS “Work” Shirt Men’s

NPS LS Work Shirt Women’s

FWS LS “Work” Shirt Men’s

FWS LS “Work” Shirt Women’s

BLM LS “Button Up” Shirt Men’s

BLM LS “Button Up” Shirt Women’s *The women’s button up shirt need a logo embroidered on the upper left breast. This image does not show the required logo.

USACE – There are currently no images for a USACE work Shirt. The USACE work shirt will be identical to the NPS shirt, with the USACE emblem on the left shoulder.

SHORT SLEEVE WORK SHIRT (Spec 0005)

The Bureaus’ seek consistency of style and fit in the short sleeve work shirts and this spec is an effort to standardize the style and fit.

The images provided below are the currently available images of each short sleeve work shirts.

With the exception of the color characteristics and customization indicated below, the short sleeve work shirts for each Bureau should be consistent under this specification.

The garment is a form fitting work shirt with two pleated breast pockets with scalloped flaps and shoulder epaulets. The shirt has military creases, a pencil slot, a shoulder emblem and badge tab.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn to perform physical work primarily outdoors

• The fit shall be comfortable and allow for full range of motion

• The fabric content shall be a performance material blend

• The fabric weight shall be suitable for year-round wear in an indoor and outdoor environment

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall be machine-washable

• The fabric shall resist fading

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

• The fabric shall provide UV sun protection matching the body fabric and be resistant to burning, melting or cracking should.

General Instructions

* Cutting: Collars, bands, pockets, and flaps should be cut to ensure uniformity.

* Stitching: Stitching appropriate to the construction and purpose of the shirt, and the location or application of the stitching, e.g. a lockstitch (301) should or where inserting the sleeve and side closing operations, should a safety stitch (516). All topstitching should be ¼” from edge. There should be 10 to 14 stitches per inch required.

one button so there should be a tie space of ¼” when collar is buttoned. should the collar leaf should measure 3 ¼” in length and be topstitched ¼” from the edge. The collar leaf should be 1 ¾” from roll line to bottom edge of collar at center back. The collar stand should measure 1 5/16” at center back and be topstitched 1/16” from top and bottom edges. For proper appearance with clip on tie, the stand should be fastened with material. The left front should contain 6 vertical buttonholes placed ¾” from the edge of from edge. The button stand should be 7/8” wide and be placed on the left side of the uncut buttonhole in the center of the flap with a button sewn on top of the buttonhole.

The flaps should be topstitched 1/8” from edge and attached to the shirt front with a should have a pencil slot 1 ½” from center edge. Upper hem should be ½” wide. Pockets should be topstitched 1/16” gauge with ¾” triangle tacks at upper corners. Both pockets

* Short Sleeves: The sleeve should be approximately 9” long from the shoulder seam.

There should be a ¾” hem turned to the inside with the folded edge topstitched 1/16” from the upper folded edge. The bottom edge of the sleeve closing seam should bartacked within 1/8” of the lower edge.

* Bottoms: A ¼” rolled hem at the bottom of the garment is preferred.

sleeve with the top edge 1 ¼ to 1 ½” below the shoulder seam depending on the garment

Short Sleeve

SM MD LG XL 2XL 3XL 4XL 5XL 6XL

Men's Neck Size

14/14.5 15/15.5 16/16.5 17/17.5 18/18.5 19/19.5 20/20.5 21/21.5 22/22.5

Men’s Chest Size

34-

38-40 42-44 46-48 50-52 54-56 58-60

Length 30/31

Length 32/33

Length 34/35

Length 36/37

Long or Short Sleeve

XS S MD LG XL 2XL 3XL

Women’s Size

2-4 6 8-10 12-14 16-18 20-22 24-26

Women’s Bust Size

32-33 34 35.5-36.5 37.5 -39 41-43 45-47 48.5-50

NPS LS “Work” Shirt Men’s

NPS LS Work Shirt Women’s

FWS LS “Work” Shirt Men’s

FWS LS “Work” Shirt Women’s

BLM LS “Button Up” Shirt Men’s

BLM LS “Button Up” Shirt Women’s *The women’s button up shirt need a logo embroidered on the upper left breast. This image does not show the required logo.

USACE – There are currently no images for a USACE work Shirt. The USACE work shirt will be identical to the NPS shirt, with the USACE emblem on the left shoulder.

LIGHTWEIGHT DRESS SHIRT LS and SS (Spec 0006)

The Bureaus’ seek consistency of style and fit in the lightweight long and short sleeve dress shirts and this spec is an effort to standardize the style and fit.

The images provided below are the currently available images of each lightweight long and short sleeve dress shirt. With the exception of the color characteristics and customization indicated below, the lightweight long and short sleeve dress shirts for each Bureau should be consistent under this specification.

The garment is a form fitting dress shirt with two pleated breast pockets with scalloped flaps and shoulder epaulets. The shirt has military creases, a pencil slot, a shoulder emblem and badge tab, in both long and short sleeves.

This shirt is the same as the Dress Shirt, in a lighter weight fabric and in a breathable weave.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn with dress uniform or with ceremonial dress

• The fit shall be comfortable and allow for full range of motion

• The fabric content shall be a performance material blend

• The fabric weight shall be suitable for year-round wear in an indoor and outdoor environment

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall be machine-washable

• The fabric shall resist fading

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

• The fabric shall provide UV sun protection

* Stitching: Stitching appropriate to the construction and purpose of the shirt, and the location or application of the stitching, e.g. a lockstitch (301) or where inserting the the collar leaf should measure 3 ¼” in length and be topstitched ¼” from the edge. The collar leaf should be 1 ¾” from roll line to bottom edge of collar at center back. The collar stand should measure 1 5/16” at center back and be topstitched 1/16” from top and bottom edges. For proper appearance with clip on tie, the stand should be fastened with an "X" beginning at the sleeve head and extending for approximately one-half the length of the strap. Length of epaulets should be graduated conforming to size of shirt and set material. The left front should contain 6 vertical buttonholes placed ¾” from the edge of the plait and be 3 ½” apart. There should be one button on the collar stand placed ¾” from edge. The button stand should be 7/8” wide and be placed on the left side of the uncut buttonhole in the center of the flap with a button sewn on top of the buttonhole.

The flaps should be topstitched 1/8” from edge and attached to the shirt front with a should have a pencil slot 1 ½” from center edge. Upper hem should be ½” wide. Pockets should be topstitched 1/16” gauge with ¾” triangle tacks at upper corners. Both pockets for military creases on shirt back should be proportionate to the size of the shirt. For

Short Sleeve

SM MD LG XL 2XL 3XL 4XL 5XL 6XL

Men's Neck Size

14/14.5 15/15.5 16/16.5 17/17.5 18/18.5 19/19.5 20/20.5 21/21.5 22/22.5

Men’s Chest Size

34-36 38-40 42-44 46-48 50-52 54-56 58-60

Sleeve

Long or Short Sleeve

XS S MD LG XL 2XL 3XL

Women’s Size

2-4 6 8-10 12-14 16-18 20-22 24-26

Women’s Bust Size

NPS LS Lightweight (“Field”) Men’s

NPS SS Lightweight (Field”) “Men’s

NPS LS Lightweight (“Field”) Women’s

NPS SS Lightweight (“Field”) Women’s

USACE LS Lightweight Men’s

USACE SS Lightweight Men’s

USACE LS Lightweight Women’s

USACE SS Lightweight Women’s

LONG SLEEVE MOISTURE WICKING SHIRT (Spec 0007)

The Bureaus’ seek consistency of style and fit in the long sleeve moisture wicking shirts and this spec is an effort to standardize the style and fit.

The images provided below are the currently available images of each long sleeve moisture wicking shirt. With the exception of the color characteristics and customization indicated below, the long sleeve moisture wicking shirts for each Bureau should be consistent under this specification.

The garment is a shirt with two pleated breast pockets with scalloped flaps and shoulder epaulets.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn to perform physical work primarily outdoors

• The fit shall be comfortable and allow for full range of motion

• The fabric content shall be a performance material

• The fabric weight shall be suitable for hot, dry or humid climates

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall be machine-washable

• The fabric shall resist fading

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

• The fabric shall provide UV sun protection

• Mesh vents at arms and cape designed for breathability

• Thread: Sewing thread for all operations shall be appropriate for the construction and

• Buttons: Buttons shall be synthetic, industry standard size for a dress shirt, of a color

* Cutting: Collars, bands, pockets, and flaps shall be cut to ensure uniformity.

* Stitching: Stitching appropriate to the construction and purpose of the shirt, and the location or application of the stitching, e.g. a lockstitch (301) or where inserting the from edge. There shall be 10 to 14 stitches per inch required.

the collar leaf should measure 3 ¼” in length and be topstitched ¼” from the edge. The collar leaf should be 1 ¾” from roll line to bottom edge of collar at center back. The collar stand should measure 1 5/16” at center back and be topstitched 1/16” from top and bottom edges. For proper appearance with clip on tie, the stand should be fastened with material. The left front should contain 6 vertical buttonholes placed ¾” from the edge of from edge. The button stand should be 7/8” wide and be placed on the left side of the uncut buttonhole in the center of the flap with a button sewn on top of the buttonhole.

The flaps should be topstitched 1/8” from edge and attached to the shirt front with a should have a pencil slot 1 ½” from center edge. Upper hem should be ½” wide. Pockets should be topstitched 1/16” gauge with ¾” triangle tacks at upper corners. Both pockets

Short Sleeve

SM MD LG XL 2XL 3XL 4XL 5XL 6XL

Men's Neck 14/14.5 15/15.5 16/16.5 17/17.5 18/18.5 19/19.5 20/20.5 21/21.5 22/22.5

Size Men’s Chest Size

34-36 38-40 42-44 46-48 50-52 54-56 58-60

Sleeve

Long or Short Sleeve

XS S MD LG XL 2XL 3XL

Women’s Size

2-4 6 8-10 12-14 16-18 20-22 24-26

Women’s Bust Size

32-33 34 35.5-36.5 37.5 -39 41-43 45-47 48.5-

NPS – There are currently no images for a NPS moisture wicking shirt. The NPS moisture wicking shirt will be identical to the NPS lightweight shirt, with the NPS emblem on the left shoulder.

USACE – There are currently no images for a USACE moisture wicking shirt. The USACE moisture wicking shirt will be identical to the USACE lightweight shirt, with the USACE emblem on the left shoulder.

FWS – LS Moisture Wicking Shirt Men’s

FWS – LS Moisture Wicking Shirt Women’s *There is currently no image of the women’s shirt. The women’s shirt should be identical to the men’s shirt, but with true female sizing.

BLM – LS Moisture Wicking Shirt Men’s

BLM – LS Moisture Wicking Shirt Women’s *There is currently no image of the women’s shirt. The women’s shirt should be identical to the men’s shirt, but with true female sizing.

UNIFORM COMPONENTS SPECIFICATIONS

POLO SHIRT (Spec 0008)

GENERAL DESCRIPTION:

The Bureaus’ seek consistency of style and fit in the polo shirts and this spec is an effort to standardize the style and fit.

The images provided below are the currently available images of each polo shirt. With the exception of the color characteristics and customization indicated below, the polo shirts for each Bureau should be consistent under this specification.

The garment shall be a short sleeved moisture wicking polo shirt

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• The fit shall be comfortable and allow for full range of motion

• The fabric content shall be a performance material

• The fabric weight shall be suitable for an indoor and outdoor environment

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall be machine-washable

• The fabric shall resist fading

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

• The fabric shall provide UV sun protection

• Grey- USACE

• Khaki- FWS, BLM

• Baby Blue, Red- USPP

• Baby Blue - BSEE

Customization:

COE: The garment shall have an official U.S. Army Corps of Engineers logo screen printed on the left upper front. The name of the employee shall be printed on the right upper front. Both screen prints shall be black.

FWS: The garment shall have an official U.S. Fish & Wildlife logo screen embroidered on the left upper front.

BLM: The garment shall have an official Bureau of Land Management logo embroidered on the left upper front.

USPP: The red polo shall have an official U.S. Park Police U.S. Parks Police Firearms Instructor logo direct embroidered on the left upper front.

Baby blue polo shall have an official USPP logo direct embroidered on the left upper front. The Back of the Baby Blue shirt shall also have “U.S. PARK POLICE” screen printed on the back in Black.

BSEE: BSEE logo embroidered on the left upper front above the pocket and an American flag embroidered on the left upper sleeve.

Short Sleeve

SM MD LG XL 2XL 3XL 4XL 5XL 6XL

Men's Neck Size

14/14.5 15/15.5 16/16.5 17/17.5 18/18.5 19/19.5 20/20.5 21/21.5 22/22.5

Men’s Chest Size

34-36 38-40 42-44 46-48 50-52 54-56 58-60

Sleeve

Long or Short Sleeve

XS S MD LG XL 2XL 3XL

Women’s Size 2-4 6 8-10 12-14 16-18 20-22 24-26

Women’s Bust Size

32-33 34 35.5-36.5 37.5 -39 41-43 45-47 48.5-50

USACE SS Polo

FWS SS Polo

BLM SS Polo

USPP SS Polo Red

FIREARMS INSTRUCTOR

USPP SS Polo Baby Blue

BICYCLE UNIFORM

BSEE SS Polo Baby Blue *There is currently no image of the BSEE SS Polo. The BSEE SS Polo should be the same style and color as other polos, with no customization.

UNIFORM COMPONENTS SPECIFICATIONS

T-SHIRT (Spec 0009)

Gender: Male and Female

The Bureaus’ seek consistency of style and fit in the Tee shirts and this spec is an effort to standardize the style and fit.

The images provided below are the currently available images of each Tee shirt. With the exception of the color characteristics and customization indicated below, the tee shirts for each Bureau should be consistent under this specification.

The garment shall be a short sleeved 100% cotton t-shirt with screen prints.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn in an outdoor work environment

• Fade Resistant

• Pre-Shrunk

COLOR CHARACTERISTICS:

• Tan/Khaki- FWS, BLM

• Navy Blue- FWS

• Heather Grey- FWS, NPS

STYLE CHARACTERISTICS:

• Crew Neck

• Hemmed sleeves and bottom

Customization:

NPS: The garment shall have an official National Park Service Arrowhead logo screen printed on the left upper front. The garment shall have “NPS” screen printed on the center middle back.

Both screen prints shall be one color. The screen print shall be Forest Green.

FWS (Tan/Khaki): The garment shall have an official U.S. Fish & Wildlife logo screen printed on the left upper front. The screen print shall be Black.

An additional version of the T-shirt that is specifically for fire crews shall also have the words “Fire Management” printed in black, centered underneath the logo.

FWS (Navy Blue): The garment shall have the official U.S. Fish & Wildlife Volunteer logo screen printed in white on the left upper front.

FWS (Heather Grey): The garment shall have the official United States Youth Conservation Corps logo screen printed in Navy Blue and Green on the left upper front and center back.

BLM (Tan/Khaki): The garment shall have an official Bureau of Land Management logo screen printed on the left upper front. The screen print shall be Black.

An additional version of the T-shirt shall have the BLM volunteer logo screen printed on the left upper front. The screen print shall be Black.

Men's Shirts Long or Short Sleeve

SM MD LG XL 2XL 3XL 4XL 5XL 6XL

Men's Neck Size

14/14.5 15/15.5 16/16.5 17/17.5 18/18.5 19/19.5 20/20.5 21/21.5 22/22.5

Men’s Chest Size

34-36 38-40 42-44 46-48 50-52 54-56 58-60

Sleeve

Long or Short Sleeve

XS S MD LG XL 2XL 3XL

Women’s Size 2-4 6 8-10 12-14 16-18 20-22 24-26

Bust Size

32-33 34 35.5-36.5 37.5 -39 41-43 45-47 48.5-50

NPS T-Shirt

FWS T-Shirt

FIELD

FIRE MANAGEMENT

VOLUNTEER

YOUTH CONSERVATION CORPS

BLM T-Shirt

BLM T-Shirt

VOLUNTEER

LONG SLEEVE TURTLENECK (UNISEX) (Spec 0010)

The Bureaus seek consistency of style and fit in the turtleneck and this spec is an effort to standardize.

The images provided below are the current images of each turtleneck. With the exception of the customization indicated below, the turtleneck for each Bureau should be consistent under this specification.

The garment is a base layer turtleneck.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn as a base layer in an indoor and outdoor work environment

• The fabric shall stretch/allow for flexibility

• The fabric weave shall be breathable, fast drying, and possess moisture wicking capabilities

• The fabric shall be anti-microbial/odor resistant

• The fabric shall be stain and snag resistant

• The fabric shall be machine washable

• The fabric shall be colorfast and resist fading, shrinking and pilling

• The fabric shall be a lightweight material

• Black – NPS, USACE, FWS, BLM, USPP

• Collar: Interlock knit, double-ply collar that folds down to the neckline.

• Cuffs: The cuffs should be rib knit cuffs.

CUSTOMIZATION

USACE- Castle Logo embroidered in red and white on the neck/collar FWS- Lettering “USFWS” embroidered in gold on the neck/collar USPP- Lettering “USPP” embroidered in white on the neck/collar

Short Sleeve

SM MD LG XL 2XL 3XL 4XL 5XL 6XL

Men's Neck Size

14/14.5 15/15.5 16/16.5 17/17.5 18/18.5 19/19.5 20/20.5 21/21.5 22/22.5

Men’s Chest Size

34-36 38-40 42-44 46-48 50-52 54-56 58-60

Sleeve

Long or Short Sleeve

XS S MD LG XL 2XL 3XL

Women’s Size

2-4 6 8-10 12-14 16-18 20-22 24-26

Women’s Bust Size

32-33 34 35.5-36.5 37.5 -39 41-43 45-47 48.5-50

NPS

USACE

FWS

USPP

BLM *There is currently no image of the BLM turtleneck. The BLM turtleneck should be the same style and color as other turtlenecks, with no customization.

MATERNITY SHIRT (Spec 0011)

The Bureaus’ seek consistency of style and fit in the maternity shirt and this spec is an effort to standardize the style and fit.

The garment is a long sleeve maternity shirt with two pleated breast pockets with scalloped flaps.

The shirt has a shoulder emblem.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn with dress uniform

• The fit shall be comfortable and allow for full range of motion

• The fabric content shall be a performance material blend

• The fabric weight shall be suitable for year-round wear in an indoor and outdoor environment

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall be machine-washable

• The fabric shall resist fading

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

• The fabric shall provide UV sun protection

SIZING

BUST SIZE MATERNITY SIZE

33”-35” XS

36”-37” S 38”-39” M 40”-41” L

42”-43” XL

NPS

USACE

FWS

BLM *There is currently no image of the BLM maternity shirt. The BLM maternity shirt should be the same style and color as the FWS maternity shirt, with the appropriate BLM emblem on the top left shoulder.

SKIRT (Spec 0012)

Sample Size: All dimensions are based on Female’s size 12

The Bureaus’ seek consistency of style and fit in the skirt and this spec is an effort to standardize the style and fit.

The skirt shall have two quarter top front pockets, back zipper closure, pleated front, and rear kick pleat.

Gender: Female

PERFORMANCE/WORK ENVIRONMENT SALIENT CHARACTERISTICS

• Worn in an indoor and outdoor work environment

• The fabric content shall be a durable performance material blend

• The fabric weight shall be suitable for all weather conditions

• The fabric shall be machine washable

• The fabric shall be colorfast

COLOR CHARACTERISTICS

• Forest Green- NPS, USACE

• Dark Brown- BLM, FWS

Detail Design Characteristics

* Darts: There should be one dart, 3-1/2 inches in length on each side of the front and on each side of each back panel.

* Pleats: There should be an open kick pleat in the center back seam, 16” below the waistband. The kick pleat should be 2-1/4” deep, open toward the right side seam and be secured at the top with a diagonal topstitch.

* Waistband: The waistband should be 1 ¼” wide and should have a reinforced closure: a clear 22-ligne button on the inside of the waistband and a matching 22-ligne button on the outside. The skirt should be made with a continuous closed waistband. There should be 2 elastic inserts behind each sideseam, which allows the waistband to stretch 2 ½”.

The waistband should be set on the outside and closed by topstitching 1/16” from the lower edge of the band. The inner waistband edge should be bound with ¼” black twill.

* Pockets: The side pockets should have a 6.5 inch opening, be 5-1/2 inch deep from bottom of pocket opening, be made from 260 wt. pocketing material and have self goods pocket facings. The pockets should be sewn and stitched, turned and restitched. The pocket opening should have straight bartacks at each end. The front edge of the pocket opening should be topstitched 1/16”.

Sizes:

SIZE 0 2 4 6 8 10 12 14 16 18 20 22 24 26

WAIST 25 26 27 28 29 30 31.5 33 34.5 36 40 42 44 46

HIP 34 35 36 37 38 39 40.5 42 44 46 51 53 55 57

Petite 4-14 even increments Regular 4-26 even increments Tall 8-22 even increments

NPS – “Dress” Skirt

USACE – “Duty” Skirt

BLM - Skirt

FWS - Skirt

DRESS TROUSERS (Summer) (Spec 0013)

Sample Size: All dimensions are based on Male size 36R

The Bureaus’ seek consistency of style and fit in the dress trousers and this spec is an effort to standardize the style and fit.

The images provided below are the currently available images of each pair of dress trousers.

With the exception of the color characteristics and customization indicated below, the dress trousers for each Bureau should be consistent under this specification.

Plain Front with a slight flare at bottom. Quarter top front pockets, two back pockets, French fly with hook and eye closure, and two back darts. There shall be two darts on the front panel of the female’s trousers and no darts on the front of the male’s trousers.

PERFORMANCE/WORK ENVIRONMENT SALIENT CHARACTERISTICS

• Worn in an indoor and outdoor work environment in summer

• The fit shall be comfortable and allow for full range of motion to include bending, reaching, climbing, squatting without coming apart at the seams

• Reinforced stitching at high stress points (crotch, knees, armpits, etc.)

• The fabric content shall be a durable performance material blend

• The fabric weight shall be suitable for all warm/hot and humid weather

• The fabric shall be machine washable

• The fabric shall be colorfast

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

• The fabric shall provide UV sun protection

• The trousers shall conform to true male sizing

• The trousers shall conform to true female sizing

SALIENT CHARACTERISTICS

* Stitching: Center back turnunder should be no less than 2" to take care of any alterations and the seat seam should be sewn on a double needle chain stitch (401) machine, having tandem needles with an offset of 1/32nd of an inch. The inseams and outseams, seam allowances should be 1" wide and sewn with a single needle chain stitch (401) and pressed open inside. All other seams should use lock stitch (301). All exposed raw edges should be serged (503 or 504) to prevent raveling. 10-16 stitches per inch are required, except for 5 to 7 stitches per inch for blindstitching.

* Bartacks: There should be bartacks at all points of strain including base of fly curve, inside bottom edge of fly and all pocket openings. Front pocket openings should be bartacked at bottom and at top beneath waistband. Each end of hip pockets should be bartacked. Eye closure in waistband should be bartacked. All bartacks should be 3/8 to ½” in length.

* Crotch and Fly: The zipper stay is to be cut of matching specified trim and to be the exact size as the fly and to be serged together. The French fly is to be made of the same material as the trouser. The zipper to be not less than 1/2 inch under the opening. The fly lining is to have a tail covering inseam and crotch. Crotch is to be lined front and back, four quarter, with a double thickness of matching specified trim fabric. The fly should also have a tab and button closure at the bottom of the waistband. The tab should be made of basic material.

* Waistband: The waistband should be 2" wide and should be closed with a crush proof hook and eye, the eye being bartacked for stability. The finished waistband curtain, 2 3/8" wide, should be attached with a rocap machine. The waistband curtain should be made of the specified trim and should have 3 strand Snug-tex sewn into the waistband lining.

Snug-tex sewn on to the top of the waistband lining should not be authorized. Trousers should have banrol waistband stabilizer sewn into the waistband on the front of the trousers from side seam to side seam. Trousers should be made with a continuous closed waistband using the closed corner method. The waistband should be set on and should be stitched below the lower edge through the outer fabric and the waistband curtain.

* Front Pockets-- Quarter top style with a deep facing of self cloth in order that pocketing does not show. Pocketing should be made of the specified trim fabric and to be stitched, turned and topstitched. Merrowed edges should not be acceptable. Pocket opening should be a minimum of 6 1/2" and pocket depth 10 ½" to top of slant. Facing should be a minimum of 1 1/2".

* Back Pockets-- Two single welt slash pockets with flaps inserted into top - edge. Pocket to finish a minimum of 6 1/4" deep by 5 3/4" wide. Facings should be minimum of 1" deep of self-material in the body side. Pocketing should be top stitched. Pocketing should extend up to and be caught in waistband seam to prevent sagging.

* Hip Pocket Flap: Flap should be constructed of basic fabric and lined with the specified trim. It should be constructed with a concealed button hole tab so that bottom closure is concealed. No stitching should show on the outside of the flap. The flap should be spade style with a single point. The flap should measure 1 ¼” on the sides 2 ¼” at the point and the width of the pocket welt.

* Belt Loops: There should be 7 belt loops. Belt loops should be lined with no stitching to show on the outside and should be 2 1/4" high and 1" wide. All loops to be inserted into both the top and bottom waistband seams with the exception of the back center loop.

* Bottoms: All bottoms should be plain with a 2" blind stitch.

Men’s pants

Waist

26” 28” 30” 31” 32” 33” 34” 36” 38” 40” 42” 44” 46” 48” 50” 52” 54”

Length S 30” R 32” L 34”

XL 36”

Sizes: Short 28-40 even

Regular 28-38 all and 38-54 even Long 32-48 even Extra Long 32-48 even

Women’s pants

4 6 8 10 12 14 16 18 20 22 24 26 28

Waist 26” 27.5” 28” 30” 32” 34” 36” 38” 40” 42” 44” 46” 48”

Hip 36” 37.5” 38” 40” 42” 44” 46” 48” 50” 52” 54” 56” 58” Length S 30” R 32”

Sizes: Short 6-20

Regular 6-28 Long 6-20

Extra Long 6-20

NPS “Dress Trouser” Summer Men’s

NPS “Dress Trouser” Summer Women’s

USACE “Duty” Dress Trouser Summer Men’s

USACE “Duty” Dress Trouser Summer Women’s

FWS “Trouser” Dress Trouser Summer Men’s

FWS “Trouser” Dress Trouser Summer Women’s

BLM “Brown Pants” Dress Trouser Summer Men’s *there is currently no image of the BLM summer dress trouser. The BLM men’s summer dress trousr should be the same style and color as the FWS Dress Trouser summer Men’s

BLM “Brown Pants” Dress Trouser Summer Women’s

DRESS TROUSERS (Winter) (Spec 0013a)

Sample Size: All dimensions are based on Male size 36R

The Bureaus’ seek consistency of style and fit in the dress trousers and this spec is an effort to standardize the style and fit.

The images provided below are the currently available images of each pair of dress trousers.

With the exception of the color characteristics and customization indicated below, the dress trousers for each Bureau should be consistent under this specification.

Plain Front with a slight flare at bottom. Quarter top front pockets, two back pockets, French fly with hook and eye closure, and two back darts. There shall be two darts on the front panel of the female’s trousers and no darts on the front of the male’s trousers.

• Worn in an indoor and outdoor work environment in winter

• The fit shall be comfortable and allow for full range of motion to include bending, reaching, climbing, squatting without coming apart at the seams

• Reinforced stitching at high stress points (crotch, knees, armpits, etc.)

• The fabric content shall be a durable performance material blend

• The fabric weight shall be suitable for all cold weather conditions

• The fabric shall be machine washable

• The fabric shall be colorfast

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

* Stitching: Center back turnunder should be no less than 2" to take care of any alterations and the seat seam should be sewn on a double needle chain stitch (401) machine, having tandem needles with an offset of 1/32nd of an inch. The inseams and outseams, seam allowances should be 1" wide and sewn with a single needle chain stitch (401) and pressed open inside. All other seams should use lock stitch (301). All exposed raw edges should be serged (503 or 504) to prevent raveling. 10-16 stitches per inch are required, except for 5 to 7 stitches per inch for blindstitching.

* Bartacks: There should be bartacks at all points of strain including base of fly curve, inside bottom edge of fly and all pocket openings. Front pocket openings should be bartacked at bottom and at top beneath waistband. Each end of hip pockets should be bartacked. Eye closure in waistband should be bartacked. All bartacks should be 3/8 to ½” in length.

* Crotch and Fly: The zipper stay is to be cut of matching specified trim and to be the exact size as the fly and to be serged together. The French fly is to be made of the same material as the trouser. The zipper to be not less than 1/2 inch under the opening. The fly lining is to have a tail covering inseam and crotch. Crotch is to be lined front and back, four quarter, with a double thickness of matching specified trim fabric. The fly should also have a tab and button closure at the bottom of the waistband. The tab should be made of basic material.

* Waistband: The waistband should be 2" wide and should be closed with a crush proof hook and eye, the eye being bartacked for stability. The finished waistband curtain, 2 3/8" wide, should be attached with a rocap machine. The waistband curtain should be made of the specified trim and should have 3 strand Snug-tex sewn into the waistband lining.

Snug-tex sewn on to the top of the waistband lining should not be authorized. Trousers should have banrol waistband stabilizer sewn into the waistband on the front of the trousers from side seam to side seam. Trousers should be made with a continuous closed waistband using the closed corner method. The waistband should be set on and should be stitched below the lower edge through the outer fabric and the waistband curtain.

* Front Pockets-- Quarter top style with a deep facing of self cloth in order that pocketing does not show. Pocketing should be made of the specified trim fabric and to be stitched, turned and topstitched. Merrowed edges should not be acceptable. Pocket opening should be a minimum of 6 1/2" and pocket depth 10 ½" to top of slant. Facing should be a minimum of 1 1/2".

* Back Pockets-- Two single welt slash pockets with flaps inserted into top - edge. Pocket to finish a minimum of 6 1/4" deep by 5 3/4" wide. Facings should be minimum of 1" deep of self-material in the body side. Pocketing should be top stitched.