Amend_003_Attach_5_FWS_non_shared_Specifications.pdf

U.S. FISH & WILDLIFE SERVICE

UNIFORM COMPONENTS SPECIFICATIONS

Special Purpose Ball Cap (Spec 001)

General Description:

Ball Cap

Performance/Work Environment Characteristics:

O to be worn in an outdoor environment O heavy weight fabric O durable O stain resistant

Color Characteristics:

O Special purpose – graphite/charcoal O YCC – green O Volunteer – navy blue

Style Characteristics:

O low profile O 6-panel O unstructured O hook and loop strap closure in back for winter ball cap O adjustable plastic strap, mesh back for summer ball cap

Custom Characteristics:

O Special purpose – FWS logo embroidered on front (winter) O YCC – YCC logo embroidered on front (summer) YCC – YCC logo embroidered with Youth Leader on front (summer) O Volunteer – Volunteer logo embroidered on front (summer and winter)

Size Characteristics:

O unisex O adjustable, one size

IMAGES

Special Purpose – Graphite

YCC and YCC Youth Leader

Volunteer – Summer

Volunteer – Winter

U.S. FISH AND WILDLIFE SERVICE

UNIFORM COMPONENTS SPECIFICATIONS (Spec 002)

LS Navy Volunteer Shirt

GENERAL DESCRIPTION

The garment is a work shirt with banded button-down collar, mitered breast pockets and embroidered nameplate eyelets with reinforcement.

Gender: Male, Female

SALIENT CHARACTERISTICS

Components

* Basic Material: The material shall be 6 oz. per sq. yd., and 100% cotton.

* Buttons: There shall be 7 buttons with vertical button holes.

General Instructions

* Collar: Two-piece, lined, banded, topstitched, button down with contrasting inside collar band.

* Pockets: One button-thru hex style pocket with double needle topstitching and diagonal bartacks at top corners. Finished dimensions are 5 ½” wide by 5 ½” length.

* Mainseams: Sleeve seams sewn with 4-thread 3/8” safety stitching. Side seams sewn with 4-thread ¼” safety stitching. Shoulder join sewn with single needle and turned so stitching is concealed.

* Hem: Fish tail shaped bottom with 3/16” double turned hem.

* Sleeves and Cuffs: Long sleeve with 2-needle topstitch. 2-piece, lined cuff with

2 pleats, placket, and 2 buttons with one buttonhole closure.

* Other: Separate 2-piece, topstitched yoke with contrasting inside yoke and collar band. Tailored sleeve placket box pleat back double needle armhole.

Oversize fit.

* Customization: An official U.S. Fish & Wildlife Volunteer Embroidery shall be applied to the left upper front of the garment.

Sizes: RG XS-4XL

LN XS-4XL

UNIFORM COMPONENTS SPECIFICATIONS (Spec 003)

Brown LE Dress Trousers

Gender: Male, Female

The garment shall be a plain front trouser with quarter top front pockets and hip pockets with flaps. Pants shall have a stripe down the outside seam.

SALIENT CHARACTERISTICS

Components

* Fabric Content & Color: Fabric shall be Brown 100% Polyester. Striping shall be

Black 100% Polyester.

* Pockets: The front pocket opening shall be a approximately 6 1/2” and shall be approximately 6" deep from the bottom of the opening. They shall be stitched, turned, and restitched. The inside front pocket facing shall be a separate piece of self material finishing approximately 1 1/4” wide. The back pockets shall have an opening of approximately 5 1/2” and shall be approximately 6" deep. Sizes 29 and smaller shall have an opening of approximately 5.” They shall be finished on the outside with an exposed top and bottom cord. The left pocket shall have a tab that buttons. The front pockets shall each have a straight bartack and each back pocket shall be bartacked with a triangular bar tacking machine.

* Waistband: The waistband shall be approximately 2” wide and shall close with a hook and eye. The eye shall be bartacked for stability. A piece of waistband stiffener, approximately 3/4” in width, shall be sewn into the top of the waistband to prevent rollover. The trousers shall be made with a continuous closed waistband. The waistband shall be set on, and shall be stitched below the lower edge through the outer fabric and the waistband curtain.

The inner waistband shall be composed of a one-piece elastic web. This web shall contain a blend of 42% Nylon / 20% Polyester / 14% Neoprene Rubber (3 strands) / 6% Lycra / 18% Cotton. The elastic web shall be constructed so that the cotton content of the band is in the upper 11/8” portion where the pressure of the belt would require the wicking properties of cotton close to the body to maintain comfort. The remainder of the band will be woven with an open mesh construction to promote breathability in the hip area. Additionally, the web shall have 35% stretch and be approximately 3” wide. The web shall be sewn at the top and at the bottom waistband seams which will reduce its stretch in the upper area to allow for a comfortable fit at the waist when bending or sitting. There shall be three rows of exposed rubber woven into the center off the web.

* Inside Trim: The right fly and crotch linings shall be the same fabric and color as the waistband curtain. The right fly lining shall be sewn to the left fly below the zipper. The crotch lining shall be serged to each front. A separate French fly made of the outer fabric shall be sewn to the inside right fly.

* Stripe: The stripe shall be applied to each leg over the out seam. Stripe shall finish approximately 1” wide.

* Belt Loops: There shall be approximately five (5) belt loops on waist sizes 30 and down, approximately seven (7) belt loops on waist sizes 31 - 48, and approximately nine

(9) on sizes 50 and larger. Each loop shall be approximately 3/4” wide, of double thickness, and stitched on the face side with a two needle machine. Except for the center back loop, which shall be tacked on, all loops shall be sewn into the bottom of the waistband and into the rocap. They shall accommodate a belt that is approximately 1 5/8” wide.

* Zippers: The trousers shall be closed with a brass ratcheting zipper. The inside left fly will be reinforced with under the zipper stitching. A straight bartack shall be sewn through from the outside of the garment to the inside at the bottom of the fly. It shall be sewn through the zipper tape, the right and left fly, and the right fly lining. The right and left fly shall be joined by an additional bar tack located below the bottom zipper stop on the inside of the trouser.

* Buttons & Snaps: One 22 ligne melamine button shall be used for the French Fly tab and one each for the left hip pocket tab.

Stock Sizes: RG 28 – 54

UNIFORM COMPONENTS SPECIFICATIONS (Spec 004)

U Navy Coaches Jacket

Gender: Unisex

Navy, Lined Coach’s Jacket.

* Basic Material: 100% Nylon Taffeta

* Lining: 100% Polyester Brushed Tricot

Detail Design Characteristics

* Construction Details:

• Snap Front

• Raglan Sleeves

• Reinforced Slash Front Pockets

• Elastic Cuffs

• Open Bottom with Drawcord

• Water Resistant

Sizes: S - 3XL

UNIFORM COMPONENTS SPECIFICATIONS (Spec 005)

Brown LE Dress Jacket

Lot #: FS4001B

Gender: Male, Female

GENERAL DESCRIPTION

The style of the garment is known as an Ike Jacket. It shall be single breasted, waist length, with a peak lapel collar and a bi-swing back. It shall fasten with four button/buttonhole closures. It shall have X-stitched epaulets and two breast pockets. The jacket shall be fully lined.

SALIENT CHARACTERISTICS

Components

* Fabric Content & Color: The shell fabric shall be 100% Polyester. The lining fabric shall be 100% Polyester.

* Front: The front shall fasten with four-button/buttonhole closures. The buttons shall be official U.S. Army, Defense Guard gold, 36 Ligne, shank style buttons.

The buttons shall be placed through 1/4” diameter, round sewn eyelets and secured with a washer and an O-Ring. (The O-Rings allow the buttons to be removed when the jacket is cleaned.) The O-Rings shall be attached to the buttons between the outer body fabric and the inside facing so that they do not show on the inside of the jacket. (There shall be an opening on the inside of the jacket that allows access to the interior of the jacket for button removal.) The buttonholes shall be keyhole style and shall be reinforced with gimp. The jacket shall fasten left over right.

There shall be two pleated style pockets with scalloped flaps located on each front panel.

There shall be two round sewn eyelets with drilled centers, horizontally spaced, located above the right breast pocket flap. These eyelets shall accommodate a nameplate. The eyelets shall be 1/4” in diameter. They shall be spaced approximately 1 7/8” apart, center to center. The bottom of each eyelet shall be placed approximately 1/2” above the top of the right breast pocket flap, centered.

There shall be two round sewn eyelets with drilled centers, vertically spaced, located above the right breast pocket flap. These eyelets shall accommodate a wingpin. The eyelets shall be 1/4” in diameter. They shall be spaced 1 1/4” apart, center to center. The bottom of the lower eyelet shall be placed approximately 1 1/8” above the top of the left breast pocket flap, centered.

There shall be two round sewn eyelets with drilled centers, horizontally spaced, applied to a self-fabric badgetab, and located above the left breast pocket flap.

The bottom of the badgetab shall be placed approximately 1/2” above the top of the left breast pocket flap, centered.

* Back: The back shall be a two-piece, bi-swing style. There shall be a seam down center back. There shall be one pleat on each back panel. The pleats shall be sewn into the shoulder seam and the waistband seam. The outer edge of each pleat shall be topstitched at approximately 1/4” margin. The pleat depth shall measure 1 1/2” from top to bottom. The pleat shall be tacked approximately 3” below the shoulder seam and 4” above the waistband seam with a single bartack.

* Pockets: There shall be two pleated breast pockets with scalloped flaps located on each front panel. The pockets shall be constructed out of body fabric and shall be lined with lining fabric. The pockets shall have a center pleat that measures approximately 1 1/4” wide. The bottom corners of each pocket shall be rounded. The top edge of each pocket shall be bound with lining fabric. The pockets shall be set to the jacket with single-needle topstitching. The pockets shall measure approximately 5 3/8” wide by approximately 5 5/8” deep.

The flaps shall be constructed out of body fabric and shall be lined with lining fabric. They shall be stitched, turned, and single-needle topstitched around three edges; each shorter end and the lower scalloped edge. The single-needle topstitching shall have a stitch margin of approximately 1/4.” The flaps shall be set to the jacket with a single-needle topstitch. The flaps shall measure approximately 5 5/8” wide by approximately 2 1/2” tall at the edges and approximately 3” tall at the center. There shall be a single keyhole buttonhole (placed vertically) in the center of each flap. The round portion of the buttonholes shall be drilled. There shall be an official U.S. Army, Defense Guard gold, 25 Ligne, shank style button placed through each 1/4” diameter drilled hole. Buttons shall be secured to each flap with a washer and an O-Ring. The buttonholes shall be reinforced with gimp.

* Sleeves: The sleeves shall be two-piece style. The sleeves shall have a hem allowance of at least approximately 1 1/4.”

* Collar and Lapel: The collar shall be constructed from two layers of body fabric and shall be interlined with fusible interfacing. The collar shall be attached to a back stand. The collar shall measure approximately 2” tall at center back. The collar points shall measure approximately 1 1/2” long. The outer edge of the collar and the collar points shall be single-needle topstitched. The under collar shall be constructed from pre-padded under collar cloth, that shall be black in color.

The peak of the lapel shall measure approximately 2 1/2” long, thus measuring approximately 3/4” longer than the collar point. The open notch between the collar point and the lapel shall not measure more than 1/8”. The lapel shall break approximately 1” above the 1st button.

* Epaulets: There shall be non-functional epaulets, constructed from two layers of fabric, centered over each shoulder seam. They shall be stitched, turned, and single-needle topstitched and shall be interlined with fusible interfacing. The single-needle topstitching shall have approximately a 1/4” stitch margin.

Epaulets shall be inserted into the armhole seam. They shall be X-stitched at the armhole end and tacked down at the neck end. The epaulets shall taper, measuring approximately 2” at the armhole edge and approximately 1 1/4” at the neck edge. The length of the epaulet shall be dependent on the shoulder seam length and shall grade as the jacket increases/decreases in size. The neck edge of the epaulet shall lie flush with the neck to collar seam. There shall be a single keyhole buttonhole (placed parallel with the long edges) located in the center of each epaulet. The round portion of the each buttonhole shall be drilled. There shall be an official U.S. Army, Defense Guard gold, 25 Ligne, shank style button placed through each 1/4” diameter drilled hole. Buttons shall be secured to each epaulet with a washer and an O-Ring. The buttonholes shall be reinforced with gimp.

* Waistband: The bottom of the jacket shall have a waistband. The band shall be a one-piece style, folded. It shall be interlined with fusible interfacing. The band shall have a single, concealed button/buttonhole closure. There shall be a 36 Ligne, 4-eye button, that is black in color, located on the underside of the left front. It shall fasten to a corresponding keyhole buttonhole located on the right front. There shall be a seam in the waistband located at center back. The seam shall line up with the center back seam of the joined back panels. The top and bottom edges of the waistband shall be single-needle topstitched. The single-needle topstitching shall have approximately a 1/4” stitch margin. There shall be an elastic insert added to each side of the waistband. The finished waistband shall measure approximately 2 1/8” wide.

* Inside Detail: The inside front panels shall have facings constructed from body fabric. They shall be interlined with fusible interfacing. There shall be an opening in the lining-to-facing seam on the right side for washer and O-Ring access. The opening shall measure approximately 6 1/4” wide. The opening shall begin approximately 1 1/2”above the top of the waistband. Each end of the opening shall be bartacked.

There shall be a welted pocket on each inside front panel. The welts shall measure 3/8” wide and shall be constructed out of body fabric. The pocket openings shall measure approximately 5” wide by approximately 7 5/8” deep.

The welted pockets shall be inserted into the facing to lining seam. The edge of the welt closest to the side seam shall be bartacked. The pocket bags shall be constructed out of body fabric and shall be double tipped.

There shall be a reinforcement patch sewn above each welted pocket, from armhole seam to lining/facing seam. The patch shall be approximately 3 1/4” wide. The patch shall be constructed from body fabric and shall be attached on the inside of the lining. The patch’s purpose is to reinforce the lining fabric as nameplates and badges are pinned to the jacket.

The jacket shall have sweat shields. They shall be constructed from body fabric and shall be attached in the bottom of the armhole seam at the side seam. The shield shall be half-moon shaped. The outer edge of the shield shall be bound with lining fabric. At the widest point (measured vertically) the patch shall measure approximately 2 ¼” wide.

There shall be a hanger loop located at center back. The loop shall be constructed from 1/4” sourtache braid. The loops shall be inserted into the lining to neck seam. The finished loop (folded in half) shall measure approximately 1 1/2” long.

The center back shall have a pleat. The pleat shall measure approximately 1” deep at the neck and shall taper to nothing at the waistband.

* Size Tag & Care Instructions: Each jacket shall have a sewn in woven label.

There shall also be a printed label with care instructions and each coat will be marked with lot number, size, country of origin, and fiber content.

* Customization: There shall be an official U.S. Fish and Wildlife emblem EM1842 attached to the right sleeve, approximately 1 1/4” below the sleeve set seam, finished. There shall be an official U.S. Fish and Wildlife emblem EM1842 attached to the left sleeve, approximately 1 1/4” below the sleeve set seam, finished. The sleeve emblems shall be attached to the body fabric only. The thread used for attachment shall match the merrowed edge thread color on the emblem.

Stock Sizes: SH 34 - 50

RG 34 - 54

LN 38 - 54

XLN 40 - 54

UNIFORM COMPONENTS SPECIFICATIONS (Spec 006)

U Navy Volunteer Vest

GENERAL DESCRIPTION

The garment shall be a straight, non-tapering vest with a four-button front, and one left upper breast pocket.

* Basic Material: The fabric shall be 65% Polyester / 35% Cotton. The color shall be Navy.

* Front: Left and right lower front edges shall be cut away, and have a slight curve. The front edges and neck shall be bound with a self-fabric that finishes ½" wide. There shall be an approximately 1 ½” wide facing along the inside of each front edge. The facing shall taper to nothing at the hem and approximately 3” above the top button/buttonhole closure. The edges of the facings shall be serged to finish the edge.

* Pockets: The left upper breast pocket shall be a spade, patch style pocket. The top of the pocket shall be hemmed with a 5/8” double turned hem and single needle topstitched at an approximately ½” margin. The pocket shall be edge-stitched to the vest on both sides and the bottom. There shall be an approximately 1 ¼” wide pencil stall on the inside edge of the pocket.

* Armhole: The armhole shall be bound with a self-fabric that finishes approximately ½" wide.

* Bottom: The lower edge of the vest shall be hemmed with an approximately 5/8” single turned hem, topstitched at an approximately ½” margin. The raw edge of the hem shall be serged to finish the edge.

* Stitching: Side and shoulder seams shall be approximately 3/8” safety stitched. The outer edges of the facings shall be serged.

* Customization: A small official U.S. Fish & Wildlife Service Volunteer emblem shall be sewn on the left breast, approximately ½” above the upper left pocket.

Sizes: RG S-2XL

UNIFORM COMPONENTS SPECIFICATIONS (Spec 007)

LS Light Blue Polo

The knit shirt shall have a three button front with a straight bottom. Sleeves shall be long with rib knit cuffs. There shall be no chest pockets.

* Basic Material: The fabric is to be 60% Cotton/40% Polyester, 6.7 oz. pique knit.

* Thread: All thread shall be DTM.

* Collar: The collar shall be rib knit and dyed to match.

* Sleeves: The sleeves shall be long with rib knit cuffs.

* Placket: The placket shall be 3 button front.

* Customization: The U.S. Fish and Wildlife Service (FWS) logo EL7306 shall be embroidered on left upper front.

Sizes: S to 3XL

UNIFORM COMPONENTS SPECIFICATIONS (Spec 008)

LS Light Blue Polo

The knit shirt shall have a three button front with a straight bottom. Sleeves shall be long with rib knit cuffs. There shall be no chest pockets.

* Basic Material: The fabric is to be 60% Cotton/40% Polyester, 6.7 oz. pique knit.

* Thread: All thread shall be DTM.

* Collar: The collar shall be rib knit and dyed to match.

* Sleeves: The sleeves shall be long with rib knit cuffs.

* Placket: The placket shall be 3 button front.

* Customization: The U.S. Fish and Wildlife Service (FWS) logo EL7306 shall be embroidered on left upper front.

Sizes: S to 3XL

UNIFORM COMPONENTS SPECIFICATIONS (Spec 009)

M Black Soft Shell Fleece Jacket

Gender: Male

The garment shall be a black soft shell fleece jacket.

Vendor: Alpha Broder

Vendor Style Number: 88099 – Black 703

* Vendor Style Description:

• 3-layer performance stretch soft shell

• Body: 7.8 oz., 97% polyester/3% spandex bonded with 100% polyester fleece

• Lining: 100% polyester tricot

• Fleece lined chin guard

• Left sleeve vertical reverse coil zipper pocket

• Articulated elbows

• Lower front pockets with contrast zipper and zipper garages

• Thermal retention shock cord drawstring at hem

Customization: An official U.S. Fish and Wildlife logo shall be embroidered on the left upper front chest.

Sizes: Maintain a Stock and/or Nonstock size range that will adequately meet customer needs.

UNIFORM COMPONENTS SPECIFICATIONS (Spec 0010)

F Black Soft Shell Fleece Jacket

Gender: Female

The garment shall be a black soft shell fleece jacket.

Vendor: Alpha Broder

Vendor Style Number: 78034 – Black 703

• 3-layer performance stretch soft shell

• Body: 7.8 oz., 97% polyester/3% spandex bonded with 100% polyester fleece

• Lining: 100% polyester tricot

• Fleece lined chin guard

• Left sleeve vertical reverse coil zipper pocket

• Articulated elbows

• Lower front pockets with contrast zipper and zipper garages

• Thermal retention shock cord drawstring at hem

• Seamless Shoulder

Customization: An official U.S. Fish and Wildlife logo shall be embroidered on the left upper front chest.

LAW ENFORCEMENT and REFUGE FEDERAL WILDLIFE OFFICER POLO SHIRT LS and SS (UNISEX)(Spec 0011)

GENERAL DESCRIPTION:

The garment shall be in both a short and long sleeve version and is a moisture wicking polo shirt with heat seals and/or embroidery as identified below

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• The fit shall be comfortable and allow for full range of motion

• The fabric content shall be a performance material

• The fabric weight shall be suitable for an indoor and outdoor environment

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall be machine-washable

• The fabric shall resist fading

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

• The fabric shall provide UV sun protection

COLOR CHARACTERISTICS

• Khaki- FWS

Customization:

1. LS Tan Refuge Officer Polo, Heat Seal: The U.S. Fish and Wildlife Law Enforcement badge on the left upper front chest of the garment. The U.S. Fish and Wildlife Department of the Interior shield embroidery shall be embroidered on the left upper sleeve and the right upper sleeve. There shall be a brown heat seal that shall be placed on the center upper back of the shirt that reads FEDERAL OFFICER FISH & WILDLIFE SERVICE. FEDERAL OFFICER shall be the first line, and FISH & WILDLIFE SERVICE shall be the second line. Measurements for back screen are as follows:

FEDERAL OFFICER Approximately 2” Tall FISH & WILDLIFE SERVICE Approximately 1-5/8” Tall

2. LS Tan Refuge Officer Polo: The U.S. Fish and Wildlife Law Enforcement badge on the left upper front chest of the garment. The U.S. Fish and Wildlife Department of the Interior shield embroidery shall be embroidered on the left upper sleeve and the right upper sleeve.

3. LS Tan Inspector Polo, Heat Seal: The U.S. Fish and Wildlife Law Inspector badge shall be embroidered on the left upper front chest of the garment. The U.S. Fish and Wildlife Department of the Interior shield embroidery shall be embroidered on the left upper sleeve and the right upper sleeve. There shall be a brown heat seal that shall be placed on the center upper back of the shirt that reads FEDERAL OFFICER FISH & WILDLIFE SERVICE. FEDERAL OFFICER shall be the first line, and FISH & WILDLIFE SERVICE shall be the second line.

Measurements for back screen are as follows:

FEDERAL OFFICER Approximately 2” Tall FISH & WILDLIFE SERVICE Approximately 1-5/8” Tall

4. LS Tan Inspector Polo: The U.S. Fish and Wildlife Law Inspector badge shall be embroidered on the left upper front chest of the garment. The U.S. Fish and Wildlife Department of the Interior shield embroidery shall be embroidered on the left upper sleeve and the right upper sleeve.

5. SS Tan Refuge Officer Polo: The U.S. Fish and Wildlife Law Enforcement badge on the left upper front chest of the garment. The U.S. Fish and Wildlife Department of the Interior shield embroidery shall be embroidered on the left upper sleeve and the right upper sleeve.

6. SS Tan Inspector Polo: The U.S. Fish and Wildlife Inspector badge on the left upper front chest of the garment. The U.S. Fish and Wildlife Department of the Interior shield embroidery shall be embroidered on the left upper sleeve and the right upper sleeve.

Men's Shirts Long or Short Sleeve

SM MD LG XL 2XL 3XL 4XL 5XL 6XL

Men's Neck Size

14/14.5 15/15.5 16/16.5 17/17.5 18/18.5 19/19.5 20/20.5 21/21.5 22/22.5

Men’s Chest Size

34-36 38-40 42-44 46-48 50-52 54-56 58-60

Sleeve Length 30/31

Sleeve

32/33

34/35

36/37

Regular

Length Tall

T = Tall – Talls should have 2” longer body

Women's Shirts Long or Short Sleeve

XS S MD LG XL 2XL 3XL

Women’s Size 2-4 6 8-10 12-14 16-18 20-22 24-26 Women’s Bust Size

32-33 34 35.5-36.5 37.5 -39 41-43 45-47 48.5-50

Sleeve Length

Tall

FWS SS Polo – INSPECTOR – Heatseal

FWS SS Polo – INSPECTOR – Plain Back

FWS LS Polo – INSPECTOR – Heatseal

FWS LS Polo – INSPECTOR – Plain Back

FWS SS Polo – REFUGE WILDLIFE OFFICER – Heatseal

FWS SS Polo – REFUGE WILDLIFE OFFICER – Plain Back

FWS LS Polo – REFUGE WILDLIFE OFFICER - Heatseal

FWS LS Polo – REFUGE WILDLIFE OFFICER – Plain Back

UNIFORM COMPONENTS SPECIFICATIONS (Spec 0012)

U Brown Flex Fit Winter Ball Cap – REFUGE OFFICER

The hat shall be an enclosed baseball style cap with six piece crown contour shape and customization.

* Basic Material: The fabric shall be made from brown cotton, twill fabric.

* Front Panel: The front panel shall be constructed of two pieces backed with a fusible monofilament fabric. The panels jointly shall be 8” wide and 6 7/8” high at the center.

* Visor: The visor and visor lining shall be the same twill fabric interlined with a visor stiffener and sewn with parallel rows of lock stitching that follow the contour of the visor.

The visor shall finish smooth without twists or puckers.

* Sweatband: The black twill sweatband shall finish a minimum of 1” wide.

* Crown: The crown pieces shall be sewn together, the seam allowance pressed flat, then sewn down the 5/8” tape with stitch type 301 or 401. The crown shall have a sewn in stabilizing strip with a horizontal stitch 3/16” above the visor. A topstitch shall be sewn at the base of the crown on the front two panels.

* Closing Seams: The visor and sweatband shall be sewn to the crown with type 301 stitch and the sweatband shall finish smooth and be flat against inside of cap. A button covered with basic material, size 22 ligne, shall be set into the crown at the junction of the six crown pieces. Each of the six panels shall have one sewn eyelet hole.

* Customization: The hat shall have one official Fish and Wildlife Service LE (Law

Enforcement) Refuge Officer badge emblem sewn to the center front panel. “U.S. FISH & WILDLIFE SERVICE” shall be embroidered on the back of the hat onto the rear two panels.

UNIFORM COMPONENTS SPECIFICATIONS (Spec 0013)

U Brown Flex Fit Winter Ball Cap - INSPECTOR

The hat shall be an enclosed baseball style cap with six piece crown contour shape and customization.

SALIENT CHARACTERISTICS

Components

* Basic Material: The fabric shall be made from brown cotton, twill fabric.

* Front Panel: The front panel shall be constructed of two pieces backed with a fusible monofilament fabric. The panels jointly shall be 8” wide and 6 7/8” high at the center.

* Visor: The visor and visor lining shall be the same twill fabric interlined with a visor sewn down the 5/8” tape with stitch type 301 or 401. The crown shall have a sewn in

* Customization: The hat shall have one official Fish and Wildlife Service LE (Law

Enforcement) Inspector badge emblem sewn to the center front panel. “U.S. FISH & WILDLIFE SERVICE” shall be embroidered on the back of the hat onto the rear two panels.

POLO SHIRT LS (Spec 0014)

GENERAL DESCRIPTION:

The garment shall be a long sleeved moisture wicking polo shirt

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• The fit shall be comfortable and allow for full range of motion

• The fabric content shall be a performance material

• The fabric weight shall be suitable for an indoor and outdoor environment

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall be machine-washable

• The fabric shall resist fading

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

• The fabric shall provide UV sun protection

• The shirt shall conform to true male sizing

• The shirt shall conform to true female sizing

• Khaki- FWS

Customization:

FWS: The garment shall have an official U.S. Fish & Wildlife logo screen embroidered on the left upper front.

Men's Shirts Long or Short Sleeve

SM MD LG XL 2XL 3XL 4XL 5XL 6XL

Men's Neck Size

14/14.5 15/15.5 16/16.5 17/17.5 18/18.5 19/19.5 20/20.5 21/21.5 22/22.5

Men’s Chest Size

34-36 38-40 42-44 46-48 50-52 54-56 58-60

Sleeve

Sleeve

Length Tall

Women's Shirts Long or Short Sleeve

XS S MD LG XL 2XL 3XL

Women’s Size 2-4 6 8-10 12-14 16-18 20-22 24-26 Women’s Bust Size

32-33 34 35.5-36.5 37.5 -39 41-43 45-47 48.5-50

Tall

UNIFORM COMPONENTS SPECIFICATIONS (UNISEX)(Spec 0015)

U Brown Flex Fit Ball Cap WINTER

The hat shall be an enclosed baseball style cap with six piece crown contour shape and direct embroidery.

* Basic Material: The fabric shall be made from brown cotton, twill fabric.

* Front Panel: The front panel shall be constructed of two pieces backed with a fusible monofilament fabric. The panels jointly shall be 8” wide and 6 7/8” high at the center.

* Visor: The visor and visor lining shall be the same twill fabric interlined with a visor sewn down the 5/8” tape with stitch type 301 or 401. The crown shall have a sewn in

* Direct Embroidery: The Organization’s logo shall be direct embroidered onto the front panel in the center. The wording and embroidery on the front panel shall be machine embroidered. The U.S. Fish and Wildlife Service name shall be direct embroidered onto the rear two panels.

Sizes: RG,M, RG,XL

UNIFORM COMPONENT SPECIFICATIONS

Navy Volunteer Cardigan Sweater (UNISEX)(Spec 0016)

The garment is a cardigan sweater.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn as an indoor or outer layer in an outdoor work environment

• The fit shall be comfortable and allow for be full range of motion to including bending

• The fabric weave shall be wind and water resistant

• The fabric shall be anti-microbial/odor resistant

• The fabric shall be stain and snag resistant

• The fabric should be machine washable

• The fabric shall be colorfast and resist fading, shrinking and pilling

• Navy – FWS

STYLE CHARACTERISTICS

• Buttons: 6 button front

• Cuffs: Ribbed

CUSTOMIZATION

FWS Volunteer shoulder patch on upper center of right sleeve

SIZE CHARACTERISTICS

Stock: XS – 3XL

Non-stock: XXS, 4XL, 5XL

FWS- Navy Volunteer Cardigan Sweater

UNIFORM COMPONENTS SPECIFICATIONS (Spec 0017)

U.S. Fish & Wildlife Large Volunteer Emblem

Vendor Name: The Emblem Source

Vendor Style Description:

• Oval Style Emblem

• Blue Embroidered Merrow

• VOLUNTEER shall be embroidered at the top across a tan background

• U.S. FISH & WILDLIFE SERVICE shall be embroidered on the bottom across a tan background

• Approximately 3.875” x 3.375”

Sizes: One size

UNIFORM COMPONENTS SPECIFICATIONS (Spec 0018)

U.S. Fish & Wildlife Small Volunteer Emblem

Vendor Name: The Emblem Source

Vendor Style Description:

• Oval Style Emblem

• Blue Embroidered Merrow

• VOLUNTEER shall be embroidered at the top across a tan background

• U.S. FISH & WILDLIFE SERVICE shall be embroidered on the bottom across a tan background

• Approximately 2.75” x 2.375”

Sizes: One size

U.S. Fish and Wildlife Service Uniform Components Specifications (Spec 0019)

U Brown Work Jacket

General Description: The garment shall be a dark brown duck work jacket.

Salient Characteristics

Components: Basic material – the material shall be 100% cotton or blended fabric suitable for outdoor conditions. The color shall be dark brown.

Detail Design Characteristics

Features: The garment shall have a polyester flannel heavyweight lining (or equal), attached quilted flannel hood with drawstrings, two font hand-warmer pockets, rib knit cuffs and waistband, and triple stitched seams.

Customization: An official U.S. Fish and Wildlife badge emblem shall be sewn on the left sleeve at shoulder. The emblem shall be attached with inconspicuous stitching using thread closely matching the emblem background color.

Sizes: Maintain a stock and non-stock size range that will adequately meet customer needs.

UNIFORM COMPONENTS SPECIFICATIONS (Spec 0020)

U Brown Boot Sock

GENERAL DESCRIPTION

The accessory shall be a medium weight mid-calf boot sock. The color shall be brown.

• Content: 70% polypropylene, 28% nylon, 2% spandex.

• Care: Machine wash inside out in warm water, no bleach. Tumble dry low. Do not dry clean.

• Temperature: Moderate/Warm Weather.

• Memory-knit construction.

• Contoured rib top.

• Spandex compression zones.

• Mesh panels.

• Cushioned shin.

• Multifilament yarn construction.

Sizes: Maintain a Stock and/or Non-stock size range that will adequately meet customer needs.