Amend_003_Attach_10_OSMRE_non_shared_Specifications.pdf

OFFICE OF SURFACE MINING RECLAIMATION AND ENFORCEMENT

UNIFORM COMPONENT SPECIFICATIONS (UNISEX)(Spec 001)

Field Jacket

Sample Size: Unisex

GENERAL DESCRIPTION

Permanent press jacket with zipper from bottom of jacket to bottom of collar, two piece convertible collar, with two outside breast pockets with pointed flaps. This jacket should be designed to allow a liner to be placed inside for colder climates. This jacket comes in two versions: 1)With Badge Tab and Name Plate Holder and 2) Without

Badge Tab and Name Plate Holder

Gender: Unisex

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn in an indoor/outdoor environment

• The fit shall be comfortable and allow for full range of motion

• The fabric weight shall be suitable for all weather conditions

• The fabric shall be machine-washable

• The fabric shall resist fading

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

SALIENT CHARACTERISTICS

Components

* Basic Material: The material should be Forest Green.

* Thread: The thread for all sewing operations should be Rayon covered polyester or 100% spun polyester, dyed to match shade of self material, conforming to ticket number 50-2 or 3 ply and 70-2 or 3 ply of MIL-

T-43548. All lockstitch (301) should use 50 ply, all chainstitch (401) should use 50 ply for needle and 70 ply, and safety stitching (515 and 516) should use 50 ply for the looper, overedging (503 and 504) should use 70 ply, and safety stitching (515 and 516) should use 50 ply for the needle thread and 70 ply for other threads.

* Zipper: A brass Talon #42 zipper or equal is required. Zipper with brass teeth and slider-ratcheting-auto lock slider. Concealed zipper tape should be blended polyester/cotton or nylon/cotton.

General Instructions

* Cutting: Fronts, backs, sleeves, pockets and flaps should be cut lengthwise in goods. Collars and cuffs should be cut in the filling direction.

* Stitching: All joining seams, including sideseams, shoulder join, sleeve join, and bottom band should be

12-12 gauge (515 or 516) safety stitched.

Detail Design Characteristics

* Collar: Collar should be two-piece convertible style. Collar should have an interlining compatible with permanent press finish. Collar should be stitched, topstitched ¼ gauge and restitched to garment during attaching operation with 301 stitch type. Collar points should be 3” long, and collar should measure 2 ¾” at center back.

* Front: Closure: Zipper tape should be sandwiched between front and facing, attached with single needle 30 stitch, color to match self material. There should be 3/8” topstitching along the zipper.

* Inside Zipper Track: The jacket should be manufactured with an inside zipper track to accommodate zip-in/out liner with long sleeves.

* Facing: The jackets should have an approximate 3” inside facing which should be bound with 3/8” acetate or nylon tape. Along the facing edge, the zipper tape should be attached. The size and teeth of this zipper should be of such construction as to allow it to be joined with a zip-in/out liner. Facing and zip-in liner should be joined to zipper tape with 1 row of ¼” gauge 301 stitching.

* Pocket Flaps: Each flap should have 2 needle, ¼” gauge topstitching. Left flap should have a pencil division with each side of opening bartacked. Flaps should have straight side with single point at center.

Flaps should measure 6 3/8” wide, 1 5/8” at sides, and 2 ½” at center. Flaps should have buttonholes that are in alignment with buttons. Ends of flaps should be bartacked. Flaps should be attached with a 2 needle

¼” gauge.

* Pockets: Self material, attached with 2 rows, 1/4 gauge, 301 stitch. Both pockets should have a 27 ligne melamine button. Pocket size 6 ¾" wide by 6 ½” deep with mitered corners. Ends of pocket openings should be bartacked.

* Sleeves: One piece, coat style, set in sleeves, safety stitched, without vent.

* Cuffs: One piece design, clip corner, dress style, rectangular appearance, 2 " wide, and attached with 12-12 gauge (515 or 516) safety stitch. After joining cuff, turn seam allowance up and topstitch ¼” above joining seam. Each cuff should have one buttonhole with two 27 ligne melamine buttons on each cuff.

* Bottoms: Should finish with 2 ½” band. Jackets to have side knitted band, centered over side seam, 2 ½” high and 4” wide of 93% nylon/7% elastic double knit, 2 x 2 rib cardigan with color to match self material.

After joining band to main panels, the seam allowance should be folded up and caught by topstitching on outside of jacket ¼” above joining seam. The front waistbands should be topstitched at the bottom and each side.

* Patch: A National Park Service arrowhead shoulder patch shall be sewn securely in the center of the left sleeve with the top edge 1 ¾” to 2” below the shoulder seam depending on the garment size. The patch shall be sewn with inconspicuous stitching using brown thread closely matching the emblem background color.

Customization

* Badge Reinforcement: Badge tab should be constructed of self fabric, lined with 2 black metal eyelets 1” apart vertically from center to center and should be sewn ½” above left breast pocket flap. Finished tab should be 2” long and 1” wide.

Sizes: Regular XS-3XL

Long M-3XL

Image shown is the NPS jacket with badge tab and nameplate holder – for OSMRE an appropriate OSMRE agency badge will be required