ODS - 6175VL02.docx

This is an Ordering Data Sheet (ODS) specifying the technical requirements for a single hose assembly to be procured by the Department of the Navy Naval Supply Systems Command under solicitation N4523A26Q4048.

The required product is one hose assembly with a 1/2 inch inner diameter and 780 inches overall length (±2 percent tolerance) rated for 2,000 PSI working pressure and 8,000 PSI burst pressure, with a maximum fluid temperature of 450 degrees Fahrenheit and minimum bend radius of 3 inches. The hose must be fabricated as one continuous length with no splicing allowed, featuring a smoothbore PTFE (Teflon) liner covered with white ST-Flex silicone outer jacket, reinforced with single 304 stainless steel wire braid, 304 stainless steel crimp collars, and fitted with 316 stainless steel 1/2 inch female JIC ends. The hose must also meet vacuum service rating requirements of 28 inches HG. A Certificate of Compliance is required, and any specification changes require approval from the shipyard's Administrative Contracting Officer. Quotes must include all shipping and freight charges in the unit cost (FOB Destination basis), specify delivery lead time, provide company CAGE Code, and include signed documentation on the solicitation blocks. Invoicing and payment will follow standard Navy procedures with payment made upon proof of delivery.