ODS - 6175VL01.docx

This is an Ordering Data Sheet (ODS) for a hose assembly required by the Department of the Navy Naval Supply Systems Command under Solicitation Number N4523A26Q4048. The hose assembly specifications are highly detailed and rigid: 1/2 inch inner diameter with 120 inches overall length (±2 percent tolerance), rated for 2,000 PSI working pressure and 8,000 PSI burst pressure, with a maximum fluid temperature of 450 degrees Fahrenheit and minimum bend radius of 3 inches. The hose must be supplied as one continuous length with no splicing allowed and include vacuum service rating of 28 inches of mercury.

The hose assembly must feature a smoothbore PTFE liner with white ST-Flex silicone outer jacket, single 304 stainless steel wire braid, 304 stainless steel crimp collars, and 316 stainless steel 1/2 inch female JIC end fittings. One unit is required, and a Certificate of Compliance (COC) is mandatory. Any changes to the specification or technical requirements are prohibited without approval from the Shipyard's Administrative Contracting Officer. Quotes must include all shipping and freight charges in the unit cost, clearly state proposed delivery lead time, provide company CAGE Code, and include the vendor's signed blocks 30a and 30b on the solicitation. Payment follows federal clause 252.232-7006 and will be made only upon proof of delivery.