NGCE-RAM-20250526.pdf
PDF 45 KB Posted
- Attached to
- Fabrication of parts
- Solicitation number
- N0017326RGF01
About this file
This is a technical engineering drawing for a clevis specimen part, created for the U.S. Naval Research Laboratory at the Trumbo Point Annex in Key West, Florida. The detailed drawing specifies precise dimensional requirements for a machined component, with key specifications including a 1.015±.005 diameter through hole, 1/2-20 UNF threading, and a 0.55 x 90-degree chamfer. The part is to be manufactured from 17-4PH H1150 material, with dimensional tolerances specified to 0.010 inches and angular tolerances of 5.0 degrees. The drawing follows Geometric Dimensioning and Tolerancing (GD&T) standards per ASME Y14.5-2009 and is marked as a model-based drawing, with instructions to refer to the solid model for complete dimensional information.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Quantities REVISED.pdf | ||
| Quantities.pdf | ||
| NGCE-RAM-20250513.pdf | ||
| NGCE-RAM-20250514.pdf | ||
| NGCE-RAM-20250530.pdf | ||
| STEP files.zip | ZIP file |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1.015±.005 THRU
.840±.005
1/2-20 UNF THRU ALL
.55 X 90°, NEAR SIDE
THIS IS A MODEL-BASED DRAWING. REFER TO SOLID MODEL FOR ALL DIMENSIONS. UNLESS 1.
OTHERWISE SPECIFIED ON THE FIELD OF THE DRAWING.
DIMENSIONAL REQUIREMENTS ON THE FIELD OF THE DRAWING SHALL BE INSPECTED.2.
UNLESS OTHERWISE SPECIFIED
APPLIES.3.
REMOVE BURRS AND BREAK SHARP EDGES.4.
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
X.X 0.1
X.XX 0.03
X.XXX 0.010
ANGULAR: 5.0
TITLE:
SIZE
B
DWG. NO. REV
WEIGHT: SCALE: 1:1
A
SHEET 1 OF 1
TRUMBO POINT ANNEX
BUILDING F15
KEY WEST, FL 33041
CLEVIS, SPECIMEN
NGCE-RAM-20250526
Released
SEE PDM FOR
RESP. ENGR.
AND APPROVALS
GD&T IN ACCORDANCE
WITH: ASME Y14.5-2009
COAT
FINISH
MATERIAL 17-4PH H1150
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View3 |
File details come from the government source that posted it. Updated .