NGCE-RAM-20250513.pdf
PDF 61 KB Posted
- Attached to
- Fabrication of parts
- Solicitation number
- N0017326RGF01
About this file
This document is a technical engineering drawing for a bottom bar component designed for the U.S. Naval Research Laboratory, located at Trumbo Point Annex in Key West, Florida. The drawing specifies a bar made from 6061-T6 aluminum with a clear anodize finish, featuring precise dimensional tolerances and geometric specifications. The technical drawing provides multiple view perspectives of the bar, including top, side, and detailed cross-section views, with specific measurements such as 8.000 inches total length, multiple hole diameters of .531 and .640 inches, and tolerances ranging from ±0.010 to ±0.03 inches. The drawing follows GD&T (Geometric Dimensioning and Tolerancing) standards per ASME Y14.5-2009 and includes instructions to remove burrs and break sharp edges.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Quantities REVISED.pdf | ||
| Quantities.pdf | ||
| NGCE-RAM-20250514.pdf | ||
| NGCE-RAM-20250530.pdf | ||
| NGCE-RAM-20250526.pdf | ||
| STEP files.zip | ZIP file |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
.010 B
A
2 SURFS
B
8X .640+ .006
.001 THRU
BOTH SIDES
.020 M B A C .010 M B
8X .531+ .006
.001 THRU ALL
8.000
.020 M A B C
.010 M A
C
THIS IS A MODEL-BASED DRAWING. REFER TO SOLID MODEL FOR ALL DIMENSIONS. UNLESS 1.
OTHERWISE SPECIFIED ON THE FIELD OF THE DRAWING.
DIMENSIONAL REQUIREMENTS ON THE FIELD OF THE DRAWING SHALL BE INSPECTED.2.
UNLESS OTHERWISE SPECIFIED
APPLIES.3.
REMOVE BURRS AND BREAK SHARP EDGES.4.
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
X.X 0.1
X.XX 0.03
X.XXX 0.010
ANGULAR: 5.0
TITLE:
SIZE
B
DWG. NO. REV
WEIGHT: SCALE: 1:5
A
SHEET 1 OF 1
TRUMBO POINT ANNEX
BUILDING F15
KEY WEST, FL 33041
BAR, BOTTOM
NGCE-RAM-20250513
Released
SEE PDM FOR
RESP. ENGR.
AND APPROVALS
GD&T IN ACCORDANCE
WITH: ASME Y14.5-2009
COAT
FINISH
MATERIAL 6061-T6 ALUMINUM
CLEAR ANODIZE
| Sheet1 |
| Drawing View1 |
| Drawing View3 |
| Drawing View4 |
File details come from the government source that posted it. Updated .