NGCE-RAM-20250514.pdf
PDF 61 KB Posted
- Attached to
- Fabrication of parts
- Solicitation number
- N0017326RGF01
About this file
This is a technical drawing for a "Bar, Top" component created for the U.S. Naval Research Laboratory, located at Trumbo Point Annex, Building F15 in Key West, Florida. The detailed engineering drawing specifies a component made from 6061-T6 aluminum with a clear anodize finish, featuring precise dimensional tolerances. The drawing includes a top view and a cross-sectional view (Section A-A), with specific technical specifications such as 36x .344+/-0.005 hole configurations, 8x .64 through holes on both sides, and various dimensional tolerances ranging from ±0.1 to ±0.010 inches. The drawing follows Geometric Dimensioning and Tolerancing (GD&T) standards in accordance with ASME Y14.5-2009 and is identified by the drawing number NGCE-RAM-20250514.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Quantities REVISED.pdf | ||
| Quantities.pdf | ||
| NGCE-RAM-20250513.pdf | ||
| NGCE-RAM-20250530.pdf | ||
| NGCE-RAM-20250526.pdf | ||
| STEP files.zip | ZIP file |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AA
.010 B
A
B
8X .64 THRU
BOTH SIDES
.020 M B A C
.010 M B
6.000
36X .344+ .005 .001
SECTION A-A
.020 M A B C
.010 M A C
THIS IS A MODEL-BASED DRAWING. REFER TO SOLID MODEL FOR ALL DIMENSIONS. UNLESS 1.
OTHERWISE SPECIFIED ON THE FIELD OF THE DRAWING.
DIMENSIONAL REQUIREMENTS ON THE FIELD OF THE DRAWING SHALL BE INSPECTED.2.
UNLESS OTHERWISE SPECIFIED
APPLIES.3.
REMOVE BURRS AND BREAK SHARP EDGES.4.
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
X.X 0.1
X.XX 0.03
X.XXX 0.010
ANGULAR: 5.0
TITLE:
SIZE
B
DWG. NO. REV
WEIGHT: SCALE: 1:5
A
SHEET 1 OF 1
TRUMBO POINT ANNEX
BUILDING F15
KEY WEST, FL 33041
BAR, TOP
NGCE-RAM-20250514
Released
SEE PDM FOR
RESP. ENGR.
AND APPROVALS
GD&T IN ACCORDANCE
WITH: ASME Y14.5-2009
COAT
FINISH
MATERIAL 6061-T6 ALUMINUM
CLEAR ANODIZE
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Section View A-A |
File details come from the government source that posted it. Updated .