26 GHz PNA Specifications-modified.docx
DOCX document 23 KB Posted
- Attached to
- Phase Noise Analyzer
- Solicitation number
- NB688000-22-01726
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NB688000-22-01726
Technical specification for Phase and Amplitude Noise Analyzer
One (1) Phase and Amplitude Noise Analyzer with the following options and specifications:
Phase and Amplitude Noise Analyzer Quantity:1 Specifications:
| • | Absolute phase noise measurement capability: 10 MHz to 26 GHz. |
| • | Residual (Additive) phase noise measurement capability: 10 MHz to 6 GHz (or higher). |
| • | Residual white PM noise floor at 1 GHz: less than equal to -180 dBc/Hz. |
| • | AM Noise Measurement capability: 10 MHz to 6 GHz (or higher). |
| • | Analyzer must have two baseband inputs that support: |
| o | Cross-spectrum analysis. |
| o | The option to be able to use external mixers as phase detectors. |
| o | The option to be able to use external amplitude detectors. |
| o | Baseband noise analysis: |
| Baseband single-channel flicker noise: less than equal to 100 nV/rtHz at 1 Hz. | |
| Baseband single-channel white noise: less than equal to 3 nV/rtHz. |
| • | Selectable Internal or External References. |
| • | DUT input power range: -5 dBm to + 20 dBm, (Must support low power). |
| • | Offset Frequency Range: |
---PM Measurements: 0.1 Hz to 100 MHz ---AM Measurements: 0.1 Hz to 1 MHz (or greater) ---Baseband Measurements 0.1 Hz to 100 MHz
Delivery: 17 weeks after receipt of order.
File details come from the government source that posted it. Updated .