22-01726 Statement of work 26 GHz PNA .pdf

S

Statement of Work: Phase Noise Analyzer from up to 26 GHz 1 Last Saved: 7/12/2022 9:59 AM Double-click on for further assistance.

Use this Statement of Work document to purchase an item and/or item-related services.

TITLE: Phase Noise Analyzer from up to 26 GHz Requesting Lab/Division/Group: PML/688/(30)Time and Frequency Metrology Requisition Number: [to be entered by PR preparer]

Statement of Need The Time and Frequency Metrology group requires a phase noise analyzer with a frequency coverage range of 10 MHz to 26 GHz. The analyzer must support absolute and residual phase noise measurement, AM noise measurement, and cross-spectrum analysis.

Items and/or item-related services Section Requirements Related Information Items/Service (required)

Phase Noise Analyzer Quantity:1 Specifications:

•Frequency Range: 10 MHz to 26 GHz •Absolute and Residual (Additive) phase noise measurement capabilities •Two-channel cross-spectrum analysis •AM Noise Measurement capability •Selectable Internal or External References •Measurement PM Noise floor = -190 dBc/Hz or better •Baseband single-channel noise = less than 1 nV/rtHz •DUT input power range: -5 dBm to + 20 dBm, (Must support low power) •Offset Frequency Range ---PM Measurements: 0.1 Hz to 100 MHz ---AM Measurements: 0.1 Hz to 1 MHz (or greater) ---Baseband Measurements 0.1 Hz to 100 MHz

☐ See attached document for detailed specifications

Enter related information here

Shipping & Delivery ☐ N/A

10-12 weeks ARO ☐ Phased delivery is acceptable ☐ Software on USB / disk required ☐ Software electronic delivery acceptable Email address for software delivery

Enter related information here

Installation Installation requirements

S

Statement of Work: Phase Noise Analyzer from up to 26 GHz 2 Last Saved: 7/12/2022 9:59 AM Double-click on for further assistance.

☐ N/A ☐ Site visit recommended Enter related information here Inspection and Acceptance ☐ N/A

Inspection and acceptance is expected to take 2 weeks.

☒ Government acceptance expected to take longer than 7 days

Warranty ☐ N/A

Base Manufacturer Warranty is acceptable If you require an Extended Manufacturer Warranty, describe the warranty requirements.

Period Length:Ex. month, 6 month, year etc.

Enter related information here

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Training ☒ N/A

Training requirements Enter related information here

Maintenance

☒ N/A

Describe your maintenance requirements.

☐See attached document for detailed maintenance specifications Period Length: Ex. month, 6 month, year etc.

Enter related information here

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Repair ☒ N/A

Choose an item.

Describe your repair requirements.

Period Length: Ex. month, 6 month, year etc.

Enter related information here

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Government Furnished Material / Equipment ☒ N/A

List any government furnished material/equipment here

Enter related information here

Travel ☒ N/A

Describe any travel requirements Vendor: To the maximum extent possible, include as part of appropriate sections above (maintenance, repair, etc.).

Otherwise, it will be a separate line item, reimbursable per the Federal Travel Regulation.

Statement of Need