FMS STATEMENT OF WORK - PN 90249 MATS FUNCTIONAL TEST SET_FINAL 10.29.26.pdf

STATEMENT OF WORK

FMS Mats Functional Test Set

FOR THE V-22 AIRCRAFT

1.0 SCOPE

This Statement of Work (SOW) establishes the tasks that must be performed by the contractor for the manufacture, assembly, inspection and delivery of Intermediate (I) Level Peculiar Support Equipment (PSE) end items in support of the Japan Ground Self-Defense Force (GOJ/JGSDF) MV-22B Block C Tiltrotor Aircraft Program via Foreign Military Sales (FMS). This effort will result in a Small Business Set Aside Contract.

APPLICABLE DOCUMENTS

Drawing 3909AS9999, Rev B Identification Plate Support Equipment MIL-HDBK-61A Configuration Management Guidance MIL-HDBK-781A Reliability Test Methods, Plans, and Environments

For Engineering Development, Qualification, and Production MIL-STD-130 Identification Marking of U.S. Military Property DFARS Clause 252.204-7012 Safeguarding Covered Defense Information and

Cyber Incident Reporting Parts List 9049, Rev AB PSDAF-V22 Mats Functional Test Set Parts List Drawing List, Rev A PSDAF-V22 Mats Functional Test Set Drawing List Drawing 10000023100, Rev AE Functional Test Set, MATS Drawing 10000023331, Rev BC Panel Functional Control Assembly PSDAF-V22 Drawing 10000023332, Rev AD Cable Electrical Power Harness PSDAF-V22 Drawing 10000023333, Rev AD Cable FMU Electrical Harness PSDAF-V22 Drawing 10000023336, Rev AD Cable Input Power Extender PSDAF-V22 Drawing 10000023337, Rev BC Cable MV Capacitance PSDAF-V22 Drawing 10000023339, Rev CB Product Structure Diagram PSDAF-V22 90249 Drawing 10000023363, Rev BC PCB Assy, Display PSDAF V-22 Drawing 10000023365, Rev BB PCB Fab, Display PSDAF-V22 Drawing 10000023458, Rev BC Schematic, V-22 MATS Drawing 10000023873, Rev BB Bracket Internal V-22 Functional Test Set Drawing 10000023925, Rev CC Front Panel V-22 Drawing 10000023926, Rev BB Overlay Front Panel V-22 Drawing 10000023930, Rev AD Placard Contents PSDAF-V22 Drawing 10000024100, Rev AB Lens EMI 2.40 X 1.85 Gray 16 w/ Gold Plating Drawing 10000024101, Rev AB Lens 2.40 X 1.85 Green 50 Drawing 10000024102, Rev AB Lens EMI 1.85 X 1.00 Gray w/ Gold Plating Drawing 10000024103, Rev AB Lens 1.85 X 1.00 Green 50 Drawing 10000024109, Rev AE Foam Insert 1122 Case PSDAF-V22 Drawing 10000024235, Rev AC Cover Modified PSDAF V-22 Drawing 10000024659, Rev AC Placard UID Bell/Boeing V-22 Drawing 10000024665, Rev AD Case Modified V-22 Drawing 10000025014, Rev AB Enclosure Modified Fuel 2-Pak 90436_A0_fab_readme.doc Fab file list & descriptions, contacts, instructions 90436_A0_ThruHolePlated.ncd ASCII, NC Drill, Through hole plated 90436_A0_ThruHoleNonPlated.ncd ASCII, NC Drill, Non plated Through Hole 90436_A0_ContourNonPlated.ncd ASCII, NC Drill, Contour Non Plated.

90436_A0.ipc 356 IPC-D-356 Netlist 90436_A0_BottomMask.gdo BottomMask Gerber 274X 90436_A0_BottomPaste.gdo BottomPaste Gerber 274X 90436_A0_DrillDrawing.gdo Drill Drawing Gerber 274X 90436_A0_L1.gdo Layer 1 TOP Gerber 274X 90436_A0_L2.gdo Layer 2 Gerber 274X 90436_A0_L3.gdo Layer 3 Gerber 274X 90436_A0_L4.gdo Layer 4 Gerber 274X 90436_A0_Panel.gdo Panel Outline Gerber 274X 90436_A0_TopMask.gdo TopMask Gerber 274X 90436_A0_TopPaste.gdo TopPaste Gerber 274X

90436_A0_TopSilkscreen.gdo TopSilkscreen Gerber 274X 90436_A0_BottomSilkscreen.gdo BottomSilkscreen Gerber 274X 90436_A0_Scores.gdo V-Score Gerber 274X 10000023365_AA_FAB_DWG.pdf FAB Drawing, Fablink 10000023365_AA_ip356 356 IPC

90249_41364_DL_NULL_0001_NULL_NULL_0001_29_U_N_N_N_N

90249_41364_PL_AB_0001_AB_NULL_0001_29_U_N_N_N_N

10000011847_51190_NULL_BC_0001_BC_NULL_0001_29_U_N_N_N_N

10000011847_BC_S0001_BC_F0001

10000023338_DA_S0001_DA_F0001

10000023363_51190_NULL_BC_0001_BC_NULL_0001_29_U_N_N_N_N

10000023849_41364_NULL_AB_0001_AB_NULL_0001_29_U_N_N_N_N

10000027064_41364_NULL_AA_0001_AA_NULL_0001_29_U_N_N_N_N

10000024266 – Test Procedure 10000024267 – Calibration Procedure

2.0 REQUIREMENTS

2.1 General

The contractor shall provide materials and services as required to procure, manufacture, assemble, inspect and deliver quantity below to support V-22 FMS outfitting of the I-Level PSE end item in accordance with the respective Government furnished drawing package as called out below:

CLIN Platform Part Number NIIN Nomenclature Qty

1001 V-22 FMS 90249 01-566-8231 Functional Test Set, MATS 1

2.2 Production Deliveries Inspection

The contractor shall notify the NAVAIR Technical POC a minimum of thirty (30) days prior to planned acceptance the opportunity to inspect, at the discretion of the Government, to ensure continued compliance with the drawings and requirements of the contract. A Certificate of Conformance may be authorized.

2.3 Quality Assurance Program

The Contractor shall maintain a quality system that ensures that each I PSE end item is manufactured in accordance with the approved drawings. Shall be ISO9001 Compliant.

2.4 Item Unique Identification (IUID) Marking of US Military Property

In accordance with DFARS Clause 252.211-7003 Item Identification and valuation, the contractor is required to mark and register all end items and their components meeting the requirements called out in latest version of MIL-STD-130 at time of contract award. These include components for which the Governments unit acquisition cost is $5,000 or greater, or any component, subassembly or embedded part that is serially managed, mission essential or a controlled inventory item.

2.4.1 Construct and Method

Details on creating the UID and the marking method are contained in MIL-STD-130N. The UID may be either UID Construct #1 or Construct #2 with Construct #2 being the preferred method.

2.4.2 UID Location and Marking

The locations and marking methods selected should bear no impact on the performance of the part and minimal configuration change(s) to the part. The UID (including 2D Matrix) should be incorporated onto the data plate, in accordance with drawing 3909AS9999 Rev B. If the 2D matrix can't be incorporated onto the data plate, a 2D matrix sticker can be applied onto the main data plate provided it can be done without covering any critical data. When the 2D Data Matrix is placed directly onto the data plate, the Part Number, Serial Number and CAGE human readable characters are not required. If the above cannot be accomplished, a separate data plate can be attached which contains the 2D Matrix plus the human readable characters for the Part Number, Serial Number and CAGE. This added data plate should be attached in close proximity to the main data plate.

2.4.3 Permanency and Legibility

The UID marking and identification plates, tags, or labels when used on equipment, parts, assemblies, subassemblies, units, sets, or groups shall be permanent during the normal life expectancy of the item and be capable of withstanding the environmental test and cleaning procedures specified for the item. Legibility shall be as required for ready readability as per MIL-STD-130.

2.4.4 UID Registration

The prime contractor has the responsibility to furnish Item Unique Identification (IUID) data to the IUID registry.

Data submission of IUID data and acquisition cost should be via Wide Area Work Flow (WAWF), IUID XML file, IUID flat file or web entry. Additional information regarding data submission as well as the actual marking can be found at <http://www.acq.osd.mil/dpap/UID/>.

2.4.5 Records

The contractor shall maintain an accurate, current list of UIDs for all manufactured items on this contract and supply to the government upon request. The list shall include P/N, Serial #, CAGE, UID Location, Construct used, how it was marked and the registration method used.

2.5 Government Inspection and Acceptance

Inspection and Acceptance of all items shall be performed by DCMA.

3.0 Packaging, Handling, Storage and Transportation (PHS&T)

3.1 Packaging Requirements

The Contractor, and any subcontractors or vendors shall comply with best commercial practices for PHS&T procedures in the protection of sensitive electronic components from electrostatic discharge damage. The Contractor shall ensure that all unit, intermediate, and shipping containers are marked in compliance with recognized best commercial practices. The Contractor shall select the most economical mode of transportation for equipment, Support Equipment (SE) end items, spare and repair parts consistent with transportation priority, and required delivery dates. For items FOB destination basis, commercial bills of lading shall be used.

3.2 Marking

Marking shall be in accordance with MIL-STD-129R. Additionally, special marking labels (fragile, delicate, etc.)

shall be applied to all unit, intermediate and shipping containers as an integral part of the total pack. The contractor shall select the appropriate special marking label (s) as additional means to protect the items during packaging, handling, storage, transit, and removal from the pack.

Packaging shall be marked with the following: - Part Number - Nomenclature - Quantity - Merial Number - Government contract or purchase order number - Contractor’s name and address - National Stock Number

4.0 Cybersecurity Maturity Model Certification (CMMC) Program

Cybersecurity is a top priority for the Department of Defense (DoD). The defense industrial base (DIB) faces increasingly frequent and complex cyberattacks. To strengthen DIB cybersecurity and better safeguard DoD information, the DoD developed the Cybersecurity Maturity Model Certification (CMMC) Program to assess DoD cybersecurity requirements pertaining to Federal Contract Information (FCI) and Controlled Unclassified Information (CUI).

The items in this acquisition have been deemed to fall into CMMC Level 2- Self-Assessment. CMMC Level 2 requires implementation of the 110 security requirements set forth in NIST SP 800–171 Rev. 2 to protect CUI in contractor information systems. Level 2 assessments are conducted every three years.

CMMC Level 2 self-assessment scores are entered by the OSA into SPRS http://www.acq.osd.mil/dpap/UID/

5.0 Shipping

Shipments shall be transported via a traceable means of transportation. All shipments under this contract shall be addressed per below:

SHIP TO MAPAC: BJA005

TPS Aviation, Inc.

1501 Crocker Avenue Hayward, CA 94544-7038

ATTN: Maia Boac fms@tpsaviation.com mailto:fms@tpsaviation.com

3.0 Packaging, Handling, Storage and Transportation (PHS&T)