N68335-15-R-0210_Questions_and_Answers_11-18-2015.docx
DOCX document 15 KB Posted
- Attached to
- Main Rotor Blade Transportation Carts
- Solicitation number
- N68335-15-R-0210
About this file
Solicitation Questions Answers
View the file
Other files
| File | Type | Posted |
|---|---|---|
| N68335-15-R-0210_Amendment_03.docx | DOCX document | |
| N68335-15-R-0210_Amendment_02.docx | DOCX document | |
| Past_Performance_forms.docx | DOCX document | |
| SS9090.pdf | ||
| SS9016.pdf | ||
| N68335-15-R-0210_Questions_and_Answers_11-4-2015.docx | DOCX document | |
| N68335-15-R-0210_Questions_and_Answers_10-30-2015.docx | DOCX document | |
| Amendment_01_released_10-30-2015.docx | DOCX document | |
| N68335-15-R-0210_MRB_Carts_Solicitation.docx | DOCX document | |
| 65720-15009_(2).pdf | ||
| 65700-70033_(2).pdf | ||
| 65700-70018_(2).pdf |
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
N68335-15-R-0210: Questions & Answers 30 October 2015
QUESTION 1:
We are having an issue identifying information regarding the running gear for the transportation cart. There is a reference to locations of some of the running gear but there is no information regarding a suggested source of supply for the axels/brake/wheels, steering knuckles etc.
ANSWER 1:
The entire front running gear can be procured under P/N 32882-2 from:
Cignys Saginaw Products Corporation 68 Williamson St Saginaw, MI 48601 Phone: (989) 753-1411 Web: Cignys.com
5 November 2015
QUESTION 2:
Per the drawing, the primer required is MIL-P-8585. May MIL-PRF-23377 be used as an alternate number primer?
ANSWER 2:
YES
QUESTION 3:
Per the drawing, the top coat required is MIL-E-7729. May MIL-PRF-85285 be used as an alternate top coat?
ANSWER 3:
YES
QUESTION 4:
Please provide ID PLATE DRAWING SS9016K0487.
ANSWER 4:
See attached for the requested SS9016 page.
QUESTION 5:
Please provide CABLE DRAWING SS9090D09626.
ANSWER 5:
See attached for the requested SS9090 spec. This was replaced by SS9091, which is an export controlled drawing. If you would like to receive drawing SS9091, please send your request to receive it with your approved DD2345 to Shannan Germond at shannan.germond@navy.mil.
QUESTION 6:
Which running gear should be used for the 65700-70018-044? Is a manufacturer allowed to make running gear of his own design - if accompanied by detailed drawings?
ANSWER 6:
The running gear that must be used is P/N 42750-4 from Cygnys Saginaw. The manufacturer shall not make their own design. Contact information is below:
Terry Nagy Estimating / Customer Support Cignys, Saginaw 68 Williamson St.
Saginaw, MI 48601 Ph: 989-753-1411 Ext. 1104 Fx: 989-753-4386 tnagy@cignys.com
QUESTION 7:
Can ASTM A-36 steel be used as an alternate to the1010 steel called out on the drawing?
ANSWER 7:
YES
18 November 2015
QUESTION 8:
If common ASTM A-36 steel can be used in place of the 1010 called for in the drawings, what about changing the requirements for the extensive use of 4130 Chrome Moly steel to A36 for the bar stock and A1011 for the sheet stock. This change would result in very significant savings on the overall project.
ANSWER 8:
The 4130 Chrome moly will need to be used. This requested deviation is not authorized.
File details come from the government source that posted it. Updated .