N6660422R0002.pdf

PDF 874 KB Posted Dec 9, 2021

Attached to: MK 39 Mod 3 EMATT Production
Solicitation number: N6660422R0002
Issued by: Department of the Navy Naval Sea Systems Command

About this file

Written by GovTribe AI · Dec 28, 2023

This solicitation is for a ten-year MK 39 Mod 3 EMATT production requirement. The Navy seeks to procure MK 39 Mod 3 Expendable Mobile Antisubmarine Warfare Training Targets, along with associated engineering services and data. Deliverables include EMATT units, portable target programmers, export variants, modular kits, engineering support services, and data in various CDRL formats. Pricing is set through firm fixed-price and cost-plus-fixed-fee contract line items ordered over up to ten option years. The solicitation identifies applicable specifications and standards and provides a detailed statement of work outlining production, configuration management, and engineering task requirements.

View the file

Other files

File	Type	Posted
Exhibit A. CDRLS_MK 39 EMATT.pdf	PDF	Dec 9, 2021
Attachment 1. DD Form 254.pdf	PDF	Dec 9, 2021
Attachment 2. EMATT TDP Option Worksheet.pdf	PDF	Dec 9, 2021
Attachment 3. PRST_Table.pdf	PDF	Dec 9, 2021

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CODE

(Hour)

PAGE(S)

until 02:00 PM local time 31 Jan 2022

A X B X C X D

G F 121 - 131

132 - 149 X H 150 - 157

RATING PAGE OF PAGES

7. ISSUED BY

(Date)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

Previous Edition is Unusable 33-134 STANDARD FORM 33 (REV. 9-97)

Prescribed by GSA FAR (48 CFR) 53.214(c)

DO-C9 1 157

(If other than Item 7)

15A. NAME 16. NAME AND TITLE OF PERSON AUTHORIZED TO

AND

ADDRESS

SIGN OFFER (Type or print)

OFFEROR

AMENDMENT NO. DATE

15B. TELEPHONE NO (Include area code) 17. SIGNATURE15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

18. OFFER DATE

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

2. CONTRACT NO.

N66604 8. ADDRESS OFFER TO

See Item 7

9. Sealed offers in original and copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and

See Section L conditions contained in this solicitation.

10. FOR INFORMATION

CALL:

A. NAME (NO COLLECT CALLS)

11. TABLE OF CONTENTS

SOLICITATION/ CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/ COSTS

2 - 34

X I CONTRACT CLAUSES

DESCRIPTION/ SPECS./ WORK STATEMENT X

PACKAGING AND MARKING

35 - 52 53 - 55

J LIST OF ATTACHMENTS

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

56 - 59 60 - 63

X K

REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

CONTRACT ADMINISTRATION DATA 64 - 73 X

SPECIAL CONTRACT REQUIREMENTS

OFFER (Must be fully completed by offeror) 74 - 77 X M

L INSTRS., CONDS., AND NOTICES TO OFFERORS

EVALUATION FACTORS FOR AWARD

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments

AMENDMENT NO. DATE

to the SOLICITATION for offerors and related documents numbered and dated):

FACILITY

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period

SOLICITATION, OFFER AND AWARD

(X) SEC. DESCRIPTION (X) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA 28. AWARD DATE

EMAIL:TEL: (Signature of Contracting Officer)

CODE CODE

B. TELEPHONE (Include area code) C. E-MAIL ADDRESS

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

PART IV - REPRESENTATIONS AND INSTRUCTIONS

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

78 - 119

PART II - CONTRACT CLAUSES

NAVAL UNDERSEA WARFARE CENTER

BEATA J JONES, CODE 0223

CONTRACTS DEPARTMENT

1176 HOWELL STREET, BLDG. 1258

NEWPORT RI 02841-1708

(401) 832-5653

FAX:

TEL:

FAX:

TEL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

6. REQUISITION/PURCHASE NO.5. DATE ISSUED

09 Dec 2021

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

[ X ]

3. SOLICITATION NO.

N6660422R0002

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 3 Each Base Year Engineering Support Services

CPFF

MK39 Mod 3 EMATT First Article Test Units (including Non-Recurring Engineering) per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

Base Year 31 March 2022 - 30 March 2023 FOB: Destination

PSC CD: 6920

ESTIMATED COST

FIXED FEE

TOTAL EST COST + FEE

0002 1 Lot

DATA

FFP

Data in accordance with Contract Data Requirements List (CDRLs), DD Form 1423, Exhibit A. Not Separately Priced (NSP).

NET AMT

0003 1 Lot

DATA RIGHTS

FFP

Government Purpose rights (GPR) or Unlimited Rights; Data in accordance with Contract Data Requirements List (CDRLs), DD Form 1423, Exhibit A.

0100 1,200 Each OPTION MK 39 Mod 3 EMATT - Base Year

FFP

MK39 Mod 3 EMATT Targets per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Base Year

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

0110 30 Each OPTION Portable Target Programmer-Base Year

FFP

Portable Target Programmer per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Base Year

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0120 500 Each OPTION EMATT Export Variants - Base Year

FFP

EMATT Export Variants per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Base Year

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0130 6,200 Hours OPTION Engineering Support Services

CPFF

MK39 Mod 3 EMATT Engineering Services IAW Statement of Work Section 4.3.

Base Year Option

PSC CD: AC32

0140 1 Lot OPTION ODCs

COST

ODCs in support of CLIN 0130

Base Year Option

0200 1,200 Each OPTION MK 39 Mod 3 EMATT - Option Year 1

FFP

MK39 Mod 3 EMATT Targets per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 1

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0210 30 Each OPTION Portable Target Programmer-Option Year 1

FFP

Portable Target Programmer per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 1

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0220 500 Each OPTION EMATT Export Variants - Option Year 1

FFP

EMATT Export Variants per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 1

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0230 6,200 Hours OPTION Engineering Support Services

CPFF

MK39 Mod 3 EMATT Engineering Services IAW Statement of Work Section 4.3.

Option Year 1

0240 1 Lot OPTION ODCs

COST

ODCs in support of CLIN 0230

Option Year 1

0300 1,200 Each OPTION MK 39 Mod 3 EMATT - Option Year 2

FFP

MK39 Mod 3 EMATT Targets per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 2

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0310 30 Each OPTION Portable Target Programmer-Option Year 2

FFP

Portable Target Programmer per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 2

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0320 500 Each OPTION EMATT Export Variants - Option Year 2

FFP

EMATT Export Variants per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 2

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0330 20,300 Hours OPTION Engineering Support Services

CPFF

MK39 Mod 3 EMATT Engineering Services IAW Statement of Work Section 4.3.

Option Year 2

0340 1 Lot OPTION ODCs

COST

ODCs in support of CLIN 0330

Option Year 2

0400 1,200 Each OPTION MK 39 Mod 3 EMATT - Option Year 3

FFP

MK39 Mod 3 EMATT Targets per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 3

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0410 30 Each OPTION Portable Target Programmer-Option Year 3

FFP

Portable Target Programmer per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 3

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0420 500 Each OPTION EMATT Export Variants - Option Year 3

FFP

EMATT Export Variants per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 3

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0430 12,600 Hours OPTION Engineering Support Services

CPFF

MK39 Mod 3 EMATT Engineering Services IAW Statement of Work Section 4.3.

Option Year 3

0440 1 Lot OPTION ODCs

COST

ODCs in support of CLIN 0430

Option Year 3

0500 1,200 Each OPTION MK 39 Mod 3 EMATT - Option Year 4

FFP

MK39 Mod 3 EMATT Targets per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 4

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0510 30 Each OPTION Portable Target Programmer-Option Year 4

FFP

Portable Target Programmer per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 4

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0520 500 Each OPTION EMATT Export Variants - Option Year 4

FFP

EMATT Export Variants per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 4

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0530 100 Each OPTION Modular Kits - Option Year 4

FFP

Modular Kits of Sprint Speed and Low Frequency Passive upgrades per the attached Statement of Work.

See step ladder pricing table in Section B - Option Year 4

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0540 6,200 Hours OPTION Engineering Support Services

CPFF

MK39 Mod 3 EMATT Engineering Services IAW Statement of Work Section 4.3.

Option Year 4

0550 1 Lot OPTION ODCs

COST

ODCs in support of CLIN 0540

Option Year 4

0600 1,200 Each OPTION MK 39 Mod 3 EMATT - Option Year 5

FFP

MK39 Mod 3 EMATT Targets per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 5

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0610 30 Each OPTION Portable Target Programmer-Option Year 5

FFP

Portable Target Programmer per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 5

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0620 500 Each OPTION EMATT Export Variants - Option Year 5

FFP

EMATT Export Variants per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 5

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0630 100 Each OPTION Modular Kits - Option Year 5

FFP

Modular Kits of Sprint Speed and Low Frequency Passive upgrades per the attached Statement of Work.

See step ladder pricing table in Section B - Option Year 5

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0640 6,200 Hours OPTION Engineering Support Services

CPFF

MK39 Mod 3 EMATT Engineering Services IAW Statement of Work Section 4.3.

Option Year 5

0650 1 Lot OPTION ODCs

COST

ODCs in support of CLIN 0640

Option Year 5

0700 1,200 Each OPTION MK 39 Mod 3 EMATT - Option Year 6

FFP

MK39 Mod 3 EMATT Targets per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 6

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0710 30 Each OPTION Portable Target Programmer-Option Year 6

FFP

Portable Target Programmer per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 6

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0720 500 Each OPTION EMATT Export Variants - Option Year 6

FFP

EMATT Export Variants per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 6

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0730 100 Each OPTION Modular Kits - Option Year 6

FFP

Modular Kits of Sprint Speed and Low Frequency Passive upgrades per the attached Statement of Work.

See step ladder pricing table in Section B - Option Year 6

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0740 6,200 Hours OPTION Engineering Support Services

CPFF

MK39 Mod 3 EMATT Engineering Services IAW Statement of Work Section 4.3.

Option Year 6

0750 1 Lot OPTION ODCs

COST

ODCs in support of CLIN 0740

Option Year 6

0800 1,200 Each OPTION MK 39 Mod 3 EMATT - Option Year 7

FFP

MK39 Mod 3 EMATT Targets per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 7

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0810 30 Each OPTION Portable Target Programmer-Option Year 7

FFP

Portable Target Programmer per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 7

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0820 500 Each OPTION EMATT Export Variants - Option Year 7

FFP

EMATT Export Variants per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 7

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0830 100 Each OPTION Modular Kits - Option Year 7

FFP

Modular Kits of Sprint Speed and Low Frequency Passive upgrades per the attached Statement of Work.

See step ladder pricing table in Section B - Option Year 7

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0840 6,200 Hours OPTION Engineering Support Services

CPFF

MK39 Mod 3 EMATT Engineering Services IAW Statement of Work Section 4.3.

Option Year 7

0850 1 Lot OPTION ODCs

COST

ODCs in support of CLIN 0840

Option Year 7

0900 1,200 Each OPTION MK 39 Mod 3 EMATT - Option Year 8

FFP

MK39 Mod 3 EMATT Targets per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 8

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0910 30 Each OPTION Portable Target Programmer-Option Year 8

FFP

Portable Target Programmer per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 8

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0920 500 Each OPTION EMATT Export Variants - Option Year 8

FFP

EMATT Export Variants per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 8

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0930 100 Each OPTION Modular Kits - Option Year 8

FFP

Modular Kits of Sprint Speed and Low Frequency Passive upgrades per the attached Statement of Work.

See step ladder pricing table in Section B - Option Year 8

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

0940 6,200 Hours OPTION Engineering Support Services

CPFF

MK39 Mod 3 EMATT Engineering Services IAW Statement of Work Section 4.3.

Option Year 8

0950 1 Lot OPTION ODCs

COST

ODCs in support of CLIN 0940

Option Year 8

1000 1,200 Each OPTION MK 39 Mod 3 EMATT - Option Year 9

FFP

MK39 Mod 3 EMATT Targets per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 9

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

1010 30 Each OPTION Portable Target Programmer-Option Year 9

FFP

Portable Target Programmer per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 9

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

1020 500 Each OPTION EMATT Export Variants - Option Year 9

FFP

EMATT Export Variants per the attached Prime Item Product Performance Specification DWG 7490774 and Statement of Work.

See step ladder pricing table in Section B - Option Year 9

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

1030 100 Each OPTION Modular Kits - Option Year 9

FFP

Modular Kits of Sprint Speed and Low Frequency Passive upgrades per the attached Statement of Work.

See step ladder pricing table in Section B - Option Year 9

NOTE: The Government reserves the right to exercise this option multiple times, up to the maximum quantity.

1040 6,200 Hours OPTION Engineering Support Services

CPFF

MK39 Mod 3 EMATT Engineering Services IAW Statement of Work Section 4.3.

Option Year 9

1050 1 Lot OPTION ODCs

COST

ODCs in support of CLIN 1040

Option Year 9

CLAUSES INCORPORATED BY FULL TEXT

B-216-H006 FEE TABLE (NAVSEA) (MAR 2019)

Labor CLIN Labor Hours Cost Per Hour*

Fee Rate Per Hour*

Loaded Hourly Rate

0130 6,200

0230 6,200

0330 20,300

0430 12,600

0540 6,200

0640 6,200

0740 6,200

0840 6,200

0940 6,200

1040 6,200

*The offeror shall divide the proposed fee for each CLIN by the quantity of labor hours indicated to complete the table. Fee is calculated based on cost less FCCOM; if FCCOM is proposed, necessary columns may be added.

In the event of any inconsistency between the above table and the CLIN pricing, the CLIN pricing shall take precedence.

(End of text)

B-231-H001 TRAVEL COSTS (NAVSEA) (OCT 2018)

(a) Except as otherwise provided herein, the Contractor shall be reimbursed for its actual travel costs in accordance with FAR 31.205-46. The travel costs to be reimbursed shall be those costs for which the Contractor has maintained appropriate documentation and which have been determined to be allowable, allocable, and reasonable by the Procuring Contracting Officer, Administrative Contracting Officer, or their duly authorized representative.

(b) Reimbursable travel costs include only that travel performed from the Contractor's facility to the worksite, in and around the worksite, and from the worksite to the Contractor's facility.

however, Procuring Contracting Officer approval shall be required prior to incurring relocation expenses and travel costs incidental to relocation.

(d) The Contractor shall not be reimbursed for the following daily local travel costs:

(i) travel at U.S. Military Installations where Government transportation is available,

(ii) travel performed for personal convenience/errands, including commuting to and from work, and

(iii) travel costs incurred in the replacement of personnel when such replacement is accomplished for the Contractor's or employee's convenience.

B-232-H004 PAYMENTS OF FEE(S) (LEVEL OF EFFORT)--BASIC (NAVSEA) (OCT 2018)

(a) For purposes of this contract, "fee" means "target fee" in cost-plus-incentive-fee type contracts, "base fee" in cost-plus-award-fee type contracts, or "fixed fee" in cost-plus-fixed-fee type contracts.

(b) The Government shall make payments to the Contractor, subject to and per the clause in this contract entitled "Fixed Fee" (FAR 52.216-8) or "Incentive Fee", (FAR 52.216-10), as applicable. Such payments shall be equal to percent ( %) of the allowable cost of each invoice submitted by and payable to the Contractor pursuant to the clause of this contract entitled "Allowable Cost And Payment" (FAR 52.216-7), subject to the withholding terms and conditions of the "Fixed Fee" or "Incentive Fee" clause, as applicable (percentage of fee is based on fee dollars divided by estimated cost dollars, including facilities capital cost of money). Fee shall not be applied on Facilities Capital Cost of Money per FAR 15.404-4(c)(3) and DFARS 215-404-71-4. Total fee(s) paid to the Contractor shall not exceed the fee amount(s) set forth in this contract.

(c) The fee(s) specified in SECTION B, and payment thereof, is subject to adjustment pursuant to paragraph (g) of the text entitled Level of Effort. If the fee(s) is reduced and the reduced fee(s) is less than the sum of all fee payments made to the Contractor under this contract, the Contractor shall repay the excess amount to the Government. If the final adjusted fee exceeds all fee payments made to the contractor under this contract, the Contractor shall be paid the additional amount, subject to the availability of funds. In no event shall the Government be required to pay the Contractor any amount in excess of the funds obligated under this contract at the time of the discontinuance of work.

(d) Fee(s) withheld pursuant to the terms and conditions of this contract shall not be paid until the contract has been modified to reduce the fee(s) per the text entitled Level of Effort", or until the Procuring Contracting Officer has advised the paying office in writing that no fee adjustment is required.

Applicable CLIN: 0001

B-232-H005 PAYMENTS OF FEE(S) (LEVEL OF EFFORT)--ALTERNATE I (NAVSEA) (OCT 2018)

(b) The Government shall make payments to the Contractor, subject to and per the clause in this contract entitled "Fixed Fee" (FAR 52.216-8) or "Incentive Fee", (FAR 52.216-10), as applicable. Such payments shall be submitted by and payable to the Contractor pursuant to the clause of this contract entitled "Allowable Cost and Payment" (FAR 52.216-7), subject to the withholding terms and conditions of the "Fixed Fee" or "Incentive Fee" clause, as applicable. Fee paid per hour shall be based on total fee dollars divided by total hours to be provided. Total fee(s) paid to the Contractor shall not exceed the fee amount(s) set forth in this contract. In no event shall the Government be required to pay the Contractor any amount in excess of the funds obligated under this contract.

B-232-H006 LIMITATION OF COST OR LIMITATION OF FUNDS CLARIFICATION (NAVSEA) (OCT 2018)

The clause entitled "Limitation of Cost" (FAR 52.232-20) or "Limitation of Funds" (FAR 52.232-22), as appropriate, shall apply separately and independently to each separately identified estimated cost.

PRICING TABLES

The below tables contain pricing according to each Base/Option Year and Quantity Range.

The Government will determine each quantity to be purchased by exercising each Option.

Note: The Government reserves the right to exercise each FFP Option multiple times, up to the maximum quantity listed in each individual CLIN.

a) MK 39 Mod 3 EMATT CLINS 0100, 0200, 0300, 0400, 0500, 0600, 0700, 0800, 0900, 1000.

CLINs 0100, 0200, 0300, 0400, 0500, 0600, 0700, 0800, 0900, 1000, MK 39 Mod 3 EMATT Quantity* Unit

Pricing

CLIN

0100 – Base Year**

Unit Pricing

CLIN

0200 – Option Year 1**

Unit Pricing

CLIN

0300 - Option Year 2**

Unit Pricing

CLIN

0400 - Option Year 3**

Unit Pricing

CLIN

0500 - Option Year 4**

Unit Pricing

CLIN

0600 - Option Year 5**

Unit Pricing

CLIN

0700 - Option Year 6**

Unit Pricing

CLIN

0800 - Option Year 7**

Unit Pricing

CLIN

0900 - Option Year 8**

Unit Pricing

CLIN

1000 - Option Year 9**

400 - 600 601 - 800 801 – 1,000

1001 – 1,200

b) Portable Target Programmer CLINS 0110, 0210, 0310, 0410, 0510, 0610, 0710, 0810, 0910, 1010.

CLINS 0110, 0210, 0310, 0410, 0510, 0610, 0710, 0810, 0910, 1010, Portable Target Programmer

Pricing

CLIN

0110 – Base Year**

Unit Pricing

CLIN

0210 – Option Year 1**

Unit Pricing

CLIN

0310 - Option Year 2**

Unit Pricing

CLIN

0410 - Option Year 3**

Unit Pricing

CLIN

0510 - Option Year 4**

Unit Pricing

CLIN

0610 - Option Year 5**

Unit Pricing

CLIN

0710 - Option Year 6**

Unit Pricing

CLIN

0810 - Option Year 7**

Unit Pricing

CLIN

0910 - Option Year 8**

Unit Pricing

CLIN

1010 - Option Year 9**

1 - 30

c) EMATT Export Variants CLINS 0120, 0220, 0320, 0420, 0520, 0620, 0720, 0820, 0920, 1020

CLINS 0120, 0220, 0320, 0420, 0520, 0620, 0720, 0820, 0920, 1020, EMATT Export Variants

Pricing

CLIN

0120 – Base Year**

Unit Pricing

CLIN

0220 – Option Year 1**

Unit Pricing

CLIN

0320 - Option Year 2**

Unit Pricing

CLIN

0420 - Option Year 3**

Unit Pricing

CLIN

0520 - Option Year 4**

Unit Pricing

CLIN

0620 - Option Year 5**

Unit Pricing

CLIN

0720 - Option Year 6**

Unit Pricing

CLIN

0820 - Option Year 7**

Unit Pricing

CLIN

0920 - Option Year 8**

Unit Pricing

CLIN

1020 - Option Year

1 - 500

d) Modular Kits CLINS 0530, 0630, 0730, 0830, 0930, 1030

CLINS 0530, 0630, 0730, 0830, 0930, 1030, Modular Kits Quantity* Unit Pricing

CLIN 0530 -

Option Year 4**

Unit Pricing

CLIN 0630 -

Option Year 5**

Unit Pricing

CLIN 0730 -

Option Year 6**

Unit Pricing

CLIN 0830 -

Option Year 7**

Unit Pricing

CLIN 0930 -

Option Year 8**

Unit Pricing

CLIN 1030 -

Option Year

1 - 100

NOTE: Step Ladder Pricing is not requested for Portable Target Programmer (CLINS 0110, 0210, 0310, 0410, 0510, 0610, 0710, 0810, 0910, 1010), EMATT Export Variants (CLINS 0120, 0220, 0320, 0420, 0520, 0620, 0720, 0820, 0920, 1020) or Modular Kits (CLINS 0530, 0630, 0730, 0830, 0930, 1030)

*To be filled in by the Offeror Ordering Periods to be specified at time of contract award, but for proposal purposes:

** Base Year = Contract award through 364 days thereafter ** Option Year 1 = 364 days after first exercise of Option ** Option Year 2 = 364 days after first exercise of Option ** Option Year 3 = 364 days after first exercise of Option ** Option Year 4 = 364 days after first exercise of Option ** Option Year 5 = 364 days after first exercise of Option ** Option Year 6 = 364 days after first exercise of Option ** Option Year 7 = 364 days after first exercise of Option ** Option Year 8 = 364 days after first exercise of Option ** Option Year 9 = 364 days after first exercise of Option

The Period of Performance for the Firm Fixed Price Option CLINs shall begin when the Option is first exercised and end one (1) year thereafter, regardless of the number of times the Option is exercised.

Section C - Descriptions and Specifications

STATEMENT OF WORK

(SOW)

MK 39 Mod 3 Expendable Mobile Antisubmarine Warfare (ASW) Training Target (EMATT)

1.0 Background

The Undersea Weapons Program Office (PMS404) has tasked the Naval Undersea Warfare Center Division Newport (NUWCDIVNPT), Code 85, to procure MK 39 Mod 3 Expendable Mobile Antisubmarine Warfare (ASW) Training Targets (EMATT). The MK 39 Mod 3 EMATT is the next evolution of the expendable ASW training target that will provide the fleet with an improved, realistic, ASW target for open-ocean and range use.

The MK 39 Mod 3 EMATT is the US Navy’s open ocean ASW Training Target. MK 39 Mod 3 EMATTs simulate the acoustic and dynamic characteristics of a submarine threat. This allows all the Navy ASW, surface, air and subsurface communities to practice their detection, tracking and weapon employment skills against a threat representative target. MK 39 Mod 3 EMATT are launched from surface ships, range support craft, and from ASW aircraft via sonobuoy tubes. Target run profiles will be programmable externally through a portable programmer to produce customized runs for specific training needs. The MK 39 Mod 3 EMATT will be capable of generating discrete tonals and tonal families, broadband noise, and transient signals.

The Portable Target Programmer (PTP) allows Fleet users to reprogram EMATTs in the field to meet real time specific training needs. The PTP has the capability to perform Built-In-Test of the EMATT and can be used to download new operating system software to upgrade the EMATT.

Foreign Military Sale variants of the MK 39 EMATT configuration are country specific; the specific countries and configuration of each FMS target will be provided at the time the FMS CLIN option is awarded.

1.1 Places of Performance: Contractor’s Facility with occasional offsite testing at Government locations (including OCONUS).

1.2 Authorized Users: MK 39 EMATT Program, Code 85

1.3 Sponsors: PMS404 (Undersea Weapons)

1.4 Types of Funding: Research, Development, Test & Evaluation, Navy (RDT&EN), Weapons Procurement, Navy (WPN), Operations and Maintenance, Navy (OMN), and Foreign Military Sales (FMS)

2.0 Scope

This Statement of Work (SOW) sets forth the services required by the Contractor for production, test and delivery of MK 39 Mod3 EMATT and Engineering Services in support of the MK 39 Mod 3 EMATT program to include inspection, test, repair, operational and testing support, and software development.

3.0 Applicable Documents

The contractor shall perform the tasking required in Section 4.0 in accordance with the below Applicable Documents.

Applicable Document #

Document # Document Title Date or Revision

3.1 7490774 Prime Item Product Performance Specification for the MK 39 Mod 3 EMATT

Rev C

3.2 ANSI/ISO/ASQ

9001-2008

Quality Management Systems 2008

3.3 N/A TDP Option Selection Worksheet 12/03/2020

3.4 N/A PMS 404 Risk, Issue, and Opportunity

Management Plan (RIOMP)

15 April 2019

3.5 8721731 EMATT Mod 3 ICD Rev A

3.6 S9310-AQ-SAF-

NAVSEA Technical Manual for Batteries, Navy Lithium Safety Program Responsibilities and Procedures

2nd Revision

3.7 SG270-BV-SAF-

High-Energy Storage System Safety Manual Rev A

3.8 S0199-133-A-O-C CM Plan for Undersea Weapons Program (PMS

404) PEO SUB

Rev D

3.9 MIL-STD-31000 Technical Data Packages Rev B

4.0 Technical Requirements

The following tasks shall be performed in accordance with Applicable Documents listed in section 3.0 and using Government Furnished Information (GFI) listed in section 6.0.

All tasking in sections 4.1 and 4.2 are included in the FFP hardware CLINs, with the exception of section 4.1.3 which is included in the CPFF CLIN 0001. Section 4.2 tasking prior to setting of the baseline at First Lot Validation, is included in CPFF CLIN 0001. Tasking in Section 4.3 is CPFF Engineering Services specified by the Government in each Technical Instruction (TI).

4.1 MK 39 EMATT Production

4.1.1 Program Review and Technical Interchange Meetings

The Contractor shall conduct Program Reviews semiannually and shall participate in Technical Interchange Meetings (TIM) weekly to provide working level status reporting including technical presentations on production status and ongoing Technical Instructions. The Contractor shall provide presentation materials prior to PMRs and TIMs. Monthly production metrics must be included in each presentation. Program risks will be monitored in accordance with Applicable Document 3.4 Risk, Issue, and Opportunity Management Plan (RIOMP), approved 15 April 2019. Schedule for meetings shall be in accordance with GFI 5.7

CDRL A001: Presentation Material

4.1.2 Quality Assurance Plan

The Contractor shall establish, document, implement, and maintain a quality system that ensures conformance to requirements and meets the requirements of Applicable Document 3.2. The Contractor shall generate a Quality

Assurance Program Plan (QAPP) for review and approval. The QAPP shall describe the Quality Management System methodology and approaches to be used under the contract. The Quality Management System shall meet the requirements of Applicable Document 3.2.

CDRL A002: Quality Assurance Program Plan (QAPP)

4.1.3 Pre-Production Validation and First Lot Validation

In accordance with Applicable Document 3.1, the Contractor shall build, test and deliver Pre-Production Validation and First Lot Validation units of MK 39 EMATTs.

CDRL A003: Test Report (Pre-Production Validation Test Report, First Lot Validation Test Report, Electronics Assembly Pre-Production Test Report);

4.1.4 MK 39 Mod 3 EMATT Production

In accordance with Applicable Document 3.1, the Contractor shall build, test and deliver MK 39 Mod 3 EMATTs.

The Contracting Officer’s Representative (COR) will provide Points of Contact for delivery locations at least 30 days prior to Required Delivery Dates. The Contractor shall deliver Factory Acceptance Functional Test Report, Environmental Test Report, In-Water Test Report, and Serial Number report with each lot.

CDRL A003: Test Report (Factory Acceptance Functional Test Report, Environmental Test Report, In-Water Test Report)

CDRL A004: Technical Report - Study/Services (Serial Number report)

4.1.4.1 Early Sampling

Sampling occurs at completion of each lot, unless the contractor requests early sampling. In accordance with Applicable Document 3.1, the Contractor may request to have the Government’s source inspector randomly select the periodic sample upon completion of no less than 30% of the anticipated inspection lot quantity but less than 100%. For the Contractor to request early sampling for any lot, the Contractor shall provide written proof that subsystem components for the entire lot are from the same manufacturer and build process prior to sampling. The written proof must at a minimum include the following subsystems:

a) Acoustic ceramic vendor

b) Hull assemblies

c) Battery

d) Solenoids

e) Motors

f) DSP/G&C/RGA Rev changes

g) Electronics modifications or changes.

CDRL A005: Certificate of Compliance

4.1.4.2 Reliability Inspection Sample

In accordance with Applicable Document 3.1, the contractor shall be responsible that the reliability inspection sample is submitted for inspection with a GFI 5.8 DD Form 1222 (Request for and Results of Tests) which will be provided as GFI. The Contractor may contact the COR to request a meeting to discuss the results of any Government test, prior to final determination of the results by the Government.

4.1.4.3 Recovered Reliability Inspection Sample Units

If the Government recovers defective units from an accepted sample, the Government may return the units to the Contractor for failure analysis. If the Contractor elects to conduct failure analysis on a recovered unit, the Contractor shall provide notice to the COR, 24 hours prior to the test event. If the Contractor elects to conduct failure analysis, it shall be responsible for all failure analysis costs.

4.1.4.4 Reliability Test Plan

In accordance with Applicable Document 3.1, if the average reliability of all reliability inspection samples is below 80%, as measured at the end of each CLIN, the Contractor shall develop a Reliability Test Plan. The Contractor shall document efforts to improve EMATT reliability in the initial delivery of Reliability Test Plan. Upon approval by the Government of the initial plan, the contractor may begin efforts to improve EMATT reliability. The Contractor shall document results of the test and investigation in the final delivery of the Reliability Test Plan.

CDRL A006: Reliability Test Plan

4.1.4.5 Failure Review Board

If the reliability inspection sample does not meet the requirements of Applicable Document 3.1, the Contractor shall conduct a Failure Review Board. The Failure Review Board shall consist of both Government and Contractor personnel. Upon completion of Failure Review Board, the Contractor shall submit a Corrective Action plan. Upon Government approval of the Corrective Action plan, the Contractor shall submit a reliability inspection sample in accordance with Applicable Document 3.1.

CDRL A007: Technical Report - Study/Services (Corrective Action Plan)

CDRL A008: Technical Report - Study/Services (Failure Review Board Report)

4.1.5 Air Launch Certification

In accordance with Applicable Document 3.1, all design changes to NAVSEA Drawing #8721731 require approval by the appropriate NAVAIR personnel, in addition to the NAVSEA process documented in Applicable Document 3.8, prior to incorporation into production units. Therefore, when any Request for Variance (RFV) or Engineering Change Proposal (ECP) is submitted, the Contractor shall review NAVSEA Drawing #8721731 and submit updates as required.

For minor changes to NAVSEA Drawing #8721731, the Contractor shall submit five (5) modified test units for non-destructive testing. Minor changes are defined as changes to the Center of Gravity, within 10% of the existing tolerance, or material changes.

For major changes to NAVSEA Drawing #8721731, the Contractor shall submit fifteen (15) modified test units with for destructive testing. Major changes are defined as any changes not defined as minor in this paragraph 4.1.5.

CDRL A009: Technical Report - Study/Services (Air Launch certification package)

4.1.6 Battery Certification

In accordance with Applicable Document 3.1, Lithium batteries shall comply with Applicable Document 3.6 Navy Lithium Safety Program Responsibilities and Procedures of S9310-AQ-SAF-010. If total stored system energy equals or exceeds 1,000 watt-hours, then the Contractor shall also comply with the requirements of Applicable Document 3.7 SG270-BV-SAF-010. If the contractor elects to use any batteries which have not been previously tested by Naval Surface Warfare Center Carderock, the Contractor shall fabricate and deliver eighteen (18) cells, and five (5) full assembly batteries as certification test assets to the Government. All batteries fabricated by the contractor will be required to pass Government-conducted destruction testing as detailed in Applicable Document 3.6, and 3.7. For changes to NAVSEA Drawing #312454 or lower-level drawings, the Contractor shall submit a Battery Design Package with any RFVs or ECPs.

CDRL A00A: Technical Report - Study/Services (Battery Design Package)

4.2 Configuration Management

The Contractor shall implement Configuration Management (CM) in accordance with the Applicable Document 3.8 CM Plan for Undersea Weapons Program (PMS 404) PEO SUB S0199-133-A-O-C, to establish and maintain a configuration baseline. The Contractor shall prepare a Configuration Management Plan, in accordance with Applicable Document 3.8. The contractor’s plan shall at a minimum include, the submission of Engineering Change Proposal (ECP) to the Government for any change(s) to the MK 39 Mod 3 EMATT baseline. Class II ECPs may be submitted quarterly. ECPs shall be submitted via the CMPro Database.

CDRL A00B Supplier’s Configuration Management Plan (Configuration Management Plan)

4.2.1 Technical Drawings

As part of any ECP that is required under this contract, the Contractor shall develop and provide technical drawings that fully disclose the hardware and electrical/electronic design. The Contractor shall prepare the drawings that support the production and manufacture of hardware configuration items. The Contractor shall deliver all software and source code for software configuration items. The Contractor shall document Commercial Off-The-Shelf (COTS) and Non-Developmental Items (NDI) to a level of detail needed, to include at a minimum: suggested source of supply, manufacturer name, and part number, and supporting information such as critical requirements and provisions to support product specification analysis and procurement. The Contractor shall maintain Interface Control Documents (ICD) to document external interface design requirements for external interfaces to ship systems such as handling, launch and recovery equipment when the contractor updates associated drawings. The contractor shall maintain all drawings in the CMPro Database.

Technical drawings and documentation shall be Production Level as specified in Applicable Document 3.9 MIL-STD-31000. The Contractor shall document any changes to: product drawings and associated lists, commercial drawings and associated lists, and test equipment drawings for the production and manufacture of the MK 39 Mod 3 EMATT System. The Contractor shall develop and maintain Computer Aided Design (CAD) drawing files in a Government-approved format. All drawings and CAD files shall meet the requirements of Applicable Document 3.3, Technical Data Package (TDP) Option Selection Worksheet. The Contractor shall identify any software that will be delivered with restrictive rights or special license rights as required by DFARS 252.227-7014.

CDRL A00H Engineering Change Proposal (ECP)

CDRL A00J Request For Variance (RFV)

4.2.2 MK 39 Mod 3 EMATT Drawing Tree

The Contractor shall maintain the drawing tree for the MK 39 Mod 3 EMATT in accordance with Applicable Document 3.9…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Dec 11, 2021.