N66604_15_R_1701_0004.pdf

1300477840

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this modification is to extend the closing of this solicitation to 26 July 2016 at 2:00 p.m. EST.

1. CONTRACT ID CODE PAGE OF PAGES

1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 18-Jul-2016

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N66604-15-R-1701

X 9B. DATED (SEE ITEM 11)

26-May-2016

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

18-Jul-2016

CODE

NAVAL UNDERSEA WARFARE CTR. DIV., NPT.

JUSTEN K.J. CANTAN, CODE 0221, CONTRACTS DEPA

1176 HOWELL STREET, BLDG. 1258

NEWPORT RI 02841-1708

N66604 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N66604-15-R-1701

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been modified:

GENERAL INFORMATION

FSC: 3444

NUWCDIVNPT Control Number: 151701

NUWCDIVNPT Requisition Number(s): 1300477840

NUWCDIVNPT POC: Negotiator Name Justen K.J. Cantan (Phone: (401) 832-8976; Fax: (401) 832-4820; Email:

justen.cantan@navy.mil)

Amendment #0004:

The purpose of this amendment is to extend the closing date of this solicitation to 26 July 2016 at 2:00 p.m. EST.

# Question Response 1 Can you confirm whether the main BEG body was manufactured from a single casting (or multiple castings) or manufactured as a large weldment?

“81346/ASTM-A183 GR-F304L" reveals that the BEG Main Body is neither a casting nor a weldment, but a forging. Please refer to Drawing 7383856, Sheet 7-3, part number 13, which provides the material form/condition.

2 If castings, can you please provide casting drawings and your current approved sources for these castings?

“81346/ASTM-A183 GR-F304L" reveals that the BEG Main Body is neither a casting nor a weldment, but a forging. Please refer to Drawing 7383856, Sheet 7-3, part number 13, which provides the material form/condition.

3 Is the forging provided as GFE, or is the contractor required to procure the forging?

The contractor is required to procure the forging.

4 If contractor is required to procure, we need to know the source. The specified CAGE code 81346 only shows "American Society for Testing and Materials" (ASTM) which does not appear to be a forging house.

This is part of the procurement and the Government does not know the previous source utilized for the forging.

5 Although we incorrectly referred to this as a casting instead of a forging, we still need the original forging drawings to determine how much machining will be required to finish this part according to the prints. For example, forgings with 1/4" excess material will require considerably more time to machine than forgings with only 1/8" excess material.

This is part of the procurement and any forging drawings are the responsibility of the vendor. The Government does not know the forging house utilized and also does not have forging drawings.

All other terms and conditions remain unchanged.

N66604-15-R-1701

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 19-Jul-2016 02:00 PM to 26-Jul-2016 02:00 PM.

(End of Summary of Changes)