N66001-17-R-0170 RFP Attach 4 Desired Personnel Qualifications.pdf

RFP Attachment 4

N66001-17-R-0170 A4-1

DESIRED PERSONNEL QUALIFICATIONS

The contractor shall provide personnel who are fully qualified and competent to perform the full range of tasks described in the Statement of Work. The desired qualifications for personnel under this contract are stated below:

1. PROGRAM MANAGER

– Master's degree in management, engineering, computer science, mathematics, or physics; or other technical discipline or

– 12-plus years Department of Defense (DoD) contract/task management experience in a Command, Control, Communications, Computers, and Intelligence (C4I) development environment.

– 5 years of general management experience with 2 years of specific work in DoD project management of technical work including task, cost, schedule, and risk planning and execution.

– Extensive experience with practices and guidelines of Department of Defense Instruction 5000.01 and 5000.02.

– At least 2 years’ experience in management of integration and installation of Link-16 Systems domestically and/or internationally.

– 4 years of combined/cumulative experience with management of the following technical areas or programs:

Tactical Data Link (TDL) Systems; Advanced Combat Direction System (ACDS); Ship Self Defense System (SSDS); TDL Interoperability; Cooperative Engagement Capability (CEC) and Command and Control Processor (C2P) Family of Systems (including C2P Re-host; Common Data Link Management System (CDLMS)/Next Generation C2P (NGC2P), and C2P Modernization) ; or similar Command and Control (C2) systems .

2. SENIOR ENGINEER

– Masters degree in engineering, computer science, mathematics or physics and 4 years of technical experience at the systems level in DoD projects; or

– Bachelor's degree in engineering, computer science, mathematics, or physics and 6 years of technical experience at the systems-level in DoD projects; or

– 10-plus years operational and/or engineering experience in Navy C4I systems.

– 4 years or more of experience in progressively more responsible roles in the management of the research, design, development, test, evaluation, and integration of various communication systems at the System Integration Facility/Combined Test Bed (SIF/CTB), the Ballistic Missile Defense System Test bed, San Diego (BTS), or in a similar lab environment, or experience in the operations and management of AEGIS Systems, or experience in Satellite TDL Systems, Joint Range Extension Applications Protocol (JREAP), Link-22 Data Link Processor (DLP) or similar technical experience to the aforementioned systems.

– 4 years or more of experience in the management of integration, test, installation, performance checks, inspections, and training of Link-16 systems at international locations or remote sites.

– 4 years or more of combined experience with the following technical areas or programs: Tactical Data Link (TDL) Systems; Advanced Combat Direction System (ACDS); Ship Self Defense System (SSDS); TDL Interoperability; Cooperative Engagement Capability (CEC) and Command and Control Processor (C2P) Family of Systems (including C2P Re-host; Common Data Link Management System (CDLMS)/Next Generation C2P (NGC2P) and C2P Modernization);or similar technical experience.

– 4 years of experience with software development utilizing MIL-STD-6016, MIL-STD-3011, STANAG 5616, STANAG 5522, and integrating Joint Range Extension (JRE) capability onto U.S. and foreign military platforms.

– 4 years of experience in C, C++, Linux and real-time operating systems.

– Good working knowledge of C and C++

– Experience with Systems Integration and Complex system analysis

– Experience gathering and analyzing data to determine system requirements

A4-2

– Experience developing work plans and estimates as they relate to systems integration work tasks and team members

– Experience designing and implementing tests to verify proper system operation

– Ability to research, evaluate, and recommend solutions and technologies based on customer needs

– Experience with drafting technical instructions, engineering plans, technical designs, and other systems integration and test and evaluation related documents

3. ENGINEER

– Bachelor's degree in engineering, computer science, mathematics, or physics and 5 years of technical experience at the systems-level in DoD projects; or

– 8 years operational and/or engineering experience in Navy C4I systems.

– 4 years or more of experience in progressively more responsible roles in the management of the research, design, development, test, evaluation, and integration of various communication systems at the System Integration Facility/Combined Test Bed (SIF/CTB), the Ballistic Missile Defense System Test bed, San Diego (BTS), in a similar aforementioned lab environment, experience in the operations and management of AEGIS Systems, experience in Satellite TDL Systems, Joint Range Extension Applications Protocol (JREAP), Link-22 Data Link Processor (DLP), or similar technical experience to the aforementioned systems.

– 2 years or more of experience in the management of integration, test, installation, performance checks, inspections, and training of Link-16 systems at international locations or remote sites.

– 2 years or more of combined experience with the following technical areas or programs: Tactical Data Link (TDL) Systems; Advanced Combat Direction System (ACDS); Ship Self Defense System (SSDS); TDL Interoperability; and Cooperative Engagement Capability (CEC); and Command and Control Processor (C2P) Family of Systems (including C2P Re-host; Common Data Link Management System (CDLMS)/Next Generation C2P (NGC2P), and C2P Modernization) ; or similar technical experience.

– 3 years of experience with software development utilizing MIL-STD-6016, MIL-STD-3011, STANAG 5616, STANAG 5522, and integrating Joint Range Extension (JRE) capability onto U.S. and foreign military platforms.

– 3 years of experience in C, C++, Linux and real-time operating systems.

– Experience with Systems Integration and Complex system analysis

– Experience gathering and analyzing data to determine system requirements

– Experience developing work plans and estimates as they relate to systems integration work tasks and team members

– Experience designing and implementing tests to verify proper system operation

– Ability to research, evaluate, and recommend solutions and technologies based on customer needs

– Experience with drafting technical instructions, engineering plans, technical designs, and other systems integration related documents

4 JUNIOR ENGINEER

– Bachelor's degree in engineering, computer science, mathematics, or physics; or

– 5 years operational and/or engineering experience in Navy C4I systems.

– 1 year or more of experience in progressively more responsible roles in the management of the research, design, development, test, evaluation, and integration of various communication systems at the System Integration Facility/Combined Test Bed (SIF/CTB), the Ballistic Missile Defense System Test bed, San Diego (BTS), in a similar aforementioned lab environment, experience in the operations and management of AEGIS Systems, experience in Satellite TDL Systems, Joint Range Extension Applications Protocol (JREAP), Link-22 Data Link Processor (DLP), or similar technical experience to the aforementioned systems.

– Familiarity with or operational experience in the management of integration, test, installation, performance checks, inspections, and training of Link-16 systems at international locations or remote sites.

– Familiarity with or combined operational experience with the following technical areas or programs:

Tactical Data Link (TDL) Systems; Advanced Combat Direction System (ACDS); Ship Self Defense

A4-3

System (SSDS); TDL Interoperability; Cooperative Engagement Capability (CEC); and Command and Control Processor (C2P) Family of Systems (including C2P Re-host; Common Data Link Management System (CDLMS)/Next Generation C2P (NGC2P), and C2P Modernization); or similar technical experience.

– 1 year of experience with software development utilizing MIL-STD-6016, MIL-STD-3011, STANAG 5616, STANAG 5522, and integrating Joint Range Extension (JRE) capability onto U.S. and foreign military platforms.

– 1 years of experience in C, C++, Linux and real-time operating systems.

– Ability to conduct Systems Integration and Complex system analysis

– Ability to gather and analyzing data to determine system requirements

– Ability to research, evaluate, and recommend solutions and technologies based on customer needs

– Knowledge of drafting technical instructions, engineering plans, technical designs, and other systems integration related documents

5. SENIOR ANALYST

– Bachelor's degree in engineering, computer science, mathematics, physics or other technical discipline or

– Associate’s degree in engineering, computer science, mathematics, physics or other technical discipline and

2 years’ experience in a DoD C4I operationally relevant environment; or

– 5-plus years technician experience in Navy C4I systems.

– 4 years or more of progressively more responsible experience in all phases of military data link; testing, requirements analysis, definition, design specifications, integration, system installation, and training for complex military systems.

– 2 years of experience in test and analysis of Tactical Data Link (TDL) and Link-16 at the System Integration Facility or similar environment.

– 2 years of experience working on the development of Data Analysis and Reduction Tools (DART), specifically the Advanced Script Generator (ASG) and/or Data Format Translator (DFX) or similar technical discipline.

– 4 years of experience with utilizing MIL-STD-6016, MIL-STD-3011, STANAG 5616, STANAG 5522, and integrating Joint Range Extension (JRE) capability onto U.S. and foreign military platforms.

– 4 years of experience providing C2P support for AEGIS Combat System test efforts, operating C2P software, test execution using the Multiple Link System Test and Training Tool (MLST3), and resolving C2P hardware issues.

– 4 years of experience analyzing C2P Test Observation Reports (TORs). Including at least two years of experience using the C2P DART to analysis of C2P Data eXtraction (DX) files for C2P family of systems.

– Experience executing work plans for systems integration work tasks

– Experienced in the preparation and review of technical instructions, engineering plans, technical designs, and other systems integration and test related documents

6. ANALYST

– Associate’s degree in engineering, computer science, mathematics, or physics and 1 year of experience in a DoD C4I operationally relevant environment; or

– 3-plus years technician experience in Navy C4I systems.

– 2 years or more of progressively more responsible experience in all phases of military data link; testing, requirements analysis, definition, design specifications, integration, system installation, and training for complex military systems.

– 1 year of experience in test and analysis of Tactical Data Link (TDL) and Link-16 at the System Integration Facility or similar environment.

– 1 year of experience working on the development of Data Analysis and Reduction Tools (DART), specifically the Advanced Script Generator (ASG) and/or Data Format Translator (DFX) or similar technical discipline.

A4-4

– 2 years of experience with utilizing MIL-STD-6016, MIL-STD-3011, STANAG 5616, STANAG 5522, and integrating JRE capability onto U.S. and foreign military platforms.

– 2 years of experience providing C2P support for AEGIS Combat System test efforts, operating C2P software, test execution using the MLST3, and resolving C2P hardware issues.

– 2 years of experience analyzing C2P TORs. Including at least two years of experience using the C2P DART to analysis of C2P DX files for C2P family of systems.

– Ability to execute work plans for systems integration work tasks

– Ability to draft technical instructions, engineering plans, technical designs, and other systems integration related documents

– Experienced in the preparation of technical instructions, engineering plans, technical designs, and other systems integration and test related documents

7. PROGRAMMER

– Associate (AS) degree in engineering, physics, computer science, mathematics, or other technical discipline.

One year of additional relevant experience may be substituted for each of the two years of study.

– 1 year or more of progressively more responsible experience in all phases of military data link; testing, requirements analysis, definition, design specifications, integration, system installation, and training for complex military systems.

– 6 months of experience working on the development of Data Analysis and Reduction Tools (DART), specifically the Advanced Script Generator (ASG) and/or Data Format Translator (DFX) or similar technical disciplines

– 1 year of experience in C, C++, Linux and real-time operating systems

– 1 year of experience with software development utilizing MIL-STD-6016, MIL-STD-3011, STANAG

5616, STANAG 5522, and integrating JRE capability onto U.S. and foreign military platforms.

8. TECHNICAL WRITER

– High school graduate or equivalent.

– 1 year or more of experience preparing technical documentation in accordance with DoD directives to document military data link; testing, requirements analysis, definition, and design specifications.

– 6 months of experience in documentation for test and analysis of Tactical Data Link (TDL) and Link-16 at the

System Integration Facility or similar environment.

– Experience includes the consolidation of inputs from multiple personnel to generate informative reports, user manuals, and training documents.

– Knowledge of word processing and database systems.

9. ADMINISTRATIVE ASSISTANT

– High school graduate or equivalent.

– 6 months or more of progressively more responsible experience in documentation delivery, shipping, tracking, inventory, spare parts control and cost accounting of equipment and systems in a Government environment.