Attachment (12) Pump as-built (reference).pdf

This is a technical engineering drawing from Peerless Pump Company showing specifications for a vertical pump assembly. The drawing details a U.S. Motors driver with 150 HP, 1191 RPM, 3 phase, 60 Hz, 460 volts specifications, with a VHS driver shaft type and H445TPA frame. The pump has an 8350 GPM flow rate with 50 ft bowl head rating.

The drawing includes detailed dimensional specifications showing a total height of approximately 156 inches, discharge flange measurements of 20.00 x 150# ANSI RF with 20 holes, and a 24HH single-stage bowl assembly. Key components detailed include the discharge head (20x20x24.5 FA), line shaft (φ1.69), and minimum submergence requirements. The drawing is certified for approval purposes and was prepared for Ames, Inc./Green Contracting Co. in February 2016 as part of Building 77H Repair Pump Motor 1C project documentation.