QA_R4012_8-10-18.docx
DOCX document 12 KB Posted
- Solicitation number
- N64498-18-R-4012
View the file
Other files
| File | Type | Posted |
|---|---|---|
| QAs_8-8-18.docx | DOCX document | |
| Navy_Approved_Class_HI_Shock_Testing_Machines_Jul2018.pdf | ||
| N6449818R4012-0002.pdf | ||
| Attachment 0003 - Schematic #3.pdf | ||
| Attachment 0002 - Schematic #2.pdf | ||
| N6449818R4012-0001.pdf | ||
| Attachment 0004 - Schematic #4.pdf | ||
| QA_7-10-18.pdf | ||
| Attachment 0001 - Schematic #1.pdf | ||
| N6449818R4012_RFP.pdf | ||
| CDRLS.pdf |
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Question: We noticed that item 3.1.1 describes the physical envelope of the unit and makes reference to the weight, but doesn't actually state the weight limit, nor is it shown on Schematic #4.
Is there a specific weight limit for this unit? Text of section copied below.
3.1.1 MFP envelope dimensions and weight - The MFP envelope dimension shall not exceed 62" length x 44" width x 49" Height, all of which shall include the base plate and all components. Both these weights and envelope dimensions will provide for maximum space savings. (See Schematic #4)
Answer: The weight is not listed on the schematics. Use the schematics only for maximum physical dimensions and interface locations, and general arrangement. The total MFP unit weight should not exceed 4,500 lb. wet weight.
File details come from the government source that posted it.