N6339418R0011-0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to provide responses to industry questions.

1. CONTRACT ID CODE PAGE OF PAGES

1 65

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 02-Oct-2018

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N6339418R0011

X 9B. DATED (SEE ITEM 11)

14-Sep-2018

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

02-Oct-2018

CODE

N63394

PORT HUENEME DIVISION 4363 MISSLE WAY

PORT HUENEME CA 93043-4307

N63394 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N6339418R0011

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

Q&A - AMENDMENT 0001

Document Description

Page # Section/ Paragraph

Question/Comment Government Response

Solicitation 74 Section E Inspection & Acceptance

Section E states FOB Destination.

Clarify if FOB Destination for all CLINs will be CONUS or OCONUS.

The solicitation has been amended to change all supply CLINs from FOB Destination to FOB Origin.

Solicitation 133 7.1.1 Element 1: Production Capabilities

7.1.1.a. Will the Government exempt the proposed Work Breakdown Structure (WBS) from the Volume 1 page count, in the same fashion they exempted the Integrated Management Schedule (IMS) from the page count in Section 8.1.2.f.?

The solicitation has been amended to exempt the WBS from the page count.

Attachment J-S-2 - Price Cost Template

Tab "CLINs 0102- 0106"

Tab "CLINs 0102-0106"

The Total Estimated Cost does not equal the total from the CLINs above, 0102- 0106, is this intentional?

Attachment J-S-2 has been revised to reflect the correct total.

Solicitation Pages 5-7, 74-76

Section B, Section E

All Kits are FOB Destination, is the Government expecting a single price regardless of the destination or number of shipments to a destination (i.e. same price for 8 kits to Norfolk vs 1 kit to Rota)?

The solicitation has been amended to change all supply CLINs from FOB Destination to FOB Origin.

The Government may require the contractor to ship all supplies on a cost-reimbursable basis under the applicable ODC CLIN.

Solicitation Pages 42-

Section C Can the Government clarify which paragraphs are applicable to the FFP CLINs and which are applicable to the Engineering Services CLINs? For example, Section 5.3 requires Obsolescence Management and Reporting. Will the government fund this under the engineering services CLIN on a continuing basis?

The requirements listed in Section C, SOW paragraph 5, apply to the CLINs as follows:

(1) Paragraph 5.4 applies to the

FFP CLINs for ORDALT Kits, INCO Kits, and OBA Spares;

(2) Paragraphs 5.11.3, 5.11.5, 5.11.6, 5.11.7, 5.11.8, and

5.11.9 apply to the FFP CLINs for installation; and

(3) Paragraphs 5.1 through 5.3, 5.5 through 5.10, and 5.12 apply to the CPFF CLINs for engineering services.

CLINs for CPFF engineering services and associated ODCs will be incrementally funded with tasking specified via Technical Instructions in accordance with

5252.242-9115 TECHNICAL

INSTRUCTIONS (APR 2015).

Solicitation Pages 30 -

Section B, CLINs 0092 -

Is there a listing for which equipment is included in the On-Board Allowance (OBA) spares and Installation and Checkout (INCO) spares?

The solicitation has been amended to include the parts lists for the OBA Spares and INCO Kit CLINs.

Solicitation 47 Section C, 5.1.12

Section C, paragraph 5.1.12 of the RFP states: "In conjunction with the COR and Contracting Officer, the Contractor shall assign standard eCRAFT labor categories to each existing proposed and executed labor category on the Task Order/Contract." Please clarify if this statement means that after award other labor categories not identified in the RFP may be used that are still compliant with eCRAFT?

For the CPFF engineering service CLINs, the offerors are required to propose and perform using the labor categories and equivalent eCRAFT codes specified in Section L, paragraph 10.2(b)(i). For the FFP installation service CLINs, the contract awardee will be required to work with the COR and Contracting Officer after award to assign standard eCRAFT labor categories.

Solicitation 50 Section C, 5.7.1 A host of products and activities are listed which are elements of Integrated Logistics Support (ILS). However, the RFP does not establish an ILS program as is typically required to support the ISEA. The Labor Categories and Annual Hours table does not list the personnel required to perform these activities. Clarify if the requirement for this contract is only for maintenance and update of existing documents, or will new development efforts be required.

The IPS (or ILS) requirements are incidental to the engineering services and any engineering changes. Any engineering changes will require commensurate update or maintenance of existing ILS/IPS documentation to meet supportability requirements specific to any such change(s). The labor categories and annual hours for developing the CPFF Estimates Table in Section L, paragraph 10.2(b)(i) adequately lists anticipated personnel required to perform the technical services (including logistics support).

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 16-Oct-2018 04:00 PM to 15-Nov-

2018 04:00 PM.

SECTION B - SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

Provide engineering sustainment services in accordance with Section C (Base Year)

To:

Provide engineering sustainment services in accordance with Section C (Base Year).

SUBCLIN 0001AA

The PSC code R425 has been added.

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

The NAICS code 334111 has been added.

The MDAP/MAIS Code 000 has been added.

SUBCLIN 0002AA

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

SUBCLIN 0003AA

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

SUBCLIN 0004AA

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

SUBCLIN 0005AA

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0006

Base Year - See Note C of Section B

Base Year - See Note C of Section B NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The FOB has changed from Destination to Origin (Shipping Point).

The PSC code 7021 has been added.

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0007

Option Year One - See Note B and C of Section B

Option Year One - See Notes B and C of Section B.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The FOB has changed from Destination to Origin (Shipping Point).

The PSC code 7021 has been added.

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0008

Option Year Two - See Note B and C of Section B

Option Year Two - See Notes B and C of Section B.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The FOB has changed from Destination to Origin (Shipping Point).

The PSC code 7021 has been added.

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0009

Option Year Three - See Note B and C of Section B

Option Year Three - See Notes B and C of Section B.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The FOB has changed from Destination to Origin (Shipping Point).

The PSC code 7021 has been added.

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0010

Option Year Four - See Note B and C of Section B

Option Year Four - See Notes B and C of Section B.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The FOB has changed from Destination to Origin (Shipping Point).

The PSC code 7021 has been added.

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0011

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0012

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0013

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0014

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0015

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0016

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0017

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0018

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0019

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0020

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0021

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0022

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0023

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0024

CLIN 0025

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0026

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0027

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0028

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0029

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0030

CLIN 0031

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0032

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0033

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0034

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0035

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0036

CLIN 0037

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0038

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0039

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0040

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0041

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0042

The PROG code S10 has been added.

CLIN 0043

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0044

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0045

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0046

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0047

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0048

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0049

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0050

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0051

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0052

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0053

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0054

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0055

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0056

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0057

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0058

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0059

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0060

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0061

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0062

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0063

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0064

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0065

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0066

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0067

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0068

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0069

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0070

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0071

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0072

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0073

The WSC Equipment code 000 has been added.

CLIN 0074

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0075

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0076

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0077

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0078

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0079

CLIN 0080

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0081

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0082

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0083

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0084

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0085

CLIN 0086

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0087

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0088

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0089

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0090

The PROG code S10 has been added.

The WSC Equipment code 000 has been added.

CLIN 0091

CLIN 0092

Base Year. See Note C of Section B.

Base Year. See Notes B, C and D of Section B.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The PSC code 7021 has been added.

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0093

The CLIN description has changed from On-Board Allowance (OBA) Spares to OBA Spares.

Option Year One. See Note B and C of Section B.

Option Year One. See Notes B, C and D of Section B.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The PSC code 7021 has been added.

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0094

Option Year Two. See Note B and C of Section B.

Option Year Two. See Notes B, C and D of Section B.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0095

Option Year Three. See Note B and C of Section B.

Option Year Three. See Notes B, C and D of Section B.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The PSC code 7021 has been added.

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0096

Option Year Four. See Note B and C of Section B.

Option Year Four. See Notes B, C and D of Section B.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The PSC code 7021 has been added.

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0097

Base Year. See Note B and C of Section B.

Base Year. See Notes B and E of Section B.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The PSC code 7021 has been added.

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0098

The CLIN description has changed from Installation and Check Out (INCO) Kit to INCO Kit.

Option Year One. See Note B and C of Section B.

Option Year One. See Notes B and E of Section B.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The PSC code 7021 has been added.

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0099

Option Year Two. See Note B and C of Section B.

Option Year Two. See Notes B and E of Section B.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The PSC code 7021 has been added.

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0100

Option Year Three. See Note B and C of Section B.

Option Year Three. See Notes B and E of Section B.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The PSC code 7021 has been added.

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0101

Option Year Four. See Note B and C of Section B.

Option Year Four. See Notes B and E of Section B.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The PSC code 7021 has been added.

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0102

The cost constraint NTE has been deleted.

SUBCLIN 0102AA

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0103

The CLIN description has changed from Other Direct Costs (ODCs) to ODCs.

SUBCLIN 0103AA

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0104

SUBCLIN 0104AA

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0105

SUBCLIN 0105AA

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 0106

SUBCLIN 0106AA

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

CLIN 9998

SUBCLIN 9998AA

The PROG code A70 has been added.

The WSC Equipment code 000 has been added.

The following have been added by full text:

NOTE D

ON BOARD ALLOWANCE (OBA) SPARES

Pricing includes all labor, materials, ODCs, indirect costs, and profit associated with the production, test and delivery of the OBA Spares. Each OBA Spares Kit shall be comprised of the following parts:

OBA Spares Parts List Description Part Number QTY per Kit

Chassis, 3824 Storage System GQA24-ASCH-001G 1 Power Supply, 3824 Storage System GQACB-ASPW-A01R 1 iSCSI Controller, 3824 Storage System GQABJ-ASPC-C01R 1 300GB 15K SAS Drive, 3824 Storage System GQA24-ADHS-S3FR 2 1TB Dual Port SAS Drive, 3824 Storage System GQA24-ADHS-SACR 2 SFP Module, 10GigE, 3824 Storage System GQABB-ATSS-10PR 2 Chassis, 3U RES HD 518-121990-L01 1 Chassis, XR5 RES HDC Processor Module 518-122055-L02 1 Power Supply, 3U RES HD, 1.2KW AC 518-122936-L02 2 Fan Module, 1U FIO Management Server 531-122331-L01 2 Memory Board, 8 GB DDR4-2400 518-122404-L08 4 NIC, PCI-E Dual 40GBE/56GBE 518-121833-L01 1

SSD, 128GB, M.2 518-121618-L02 2

Power Supply, 1U FIO Management Server, AC 750W 531-122936-L01 2 Power Supply, SX-1410 Switch 518-122114-L01 1 Fan Module, SX-1410 Switch 518-122115-L01 1 Switch, RES HD, 16-Port, 10/100/1000 518-122193-L01 1 SFP Module, 1000BaseT MC3208411-T 3 SFP Module, 10GBase-SR MFM1T02A-SR 2 SFP Module, 10GBase-LR MFM1T02A-LR 1 SFP Module, 40GBase-SR4L MC2207411-SR4L 3 SFP Module, 1000Base-LX AXG90582 2 Power Distribution Unit (PDU), 220VAC Dual Input RPS-PDU-1U-220D-C91615 1

NOTE E

INSTALLATION AND CHECK OUT (INCO) KITS

Pricing includes all labor, materials, ODCs, indirect costs, and profit associated with the production, test and delivery of the INCO Kits. Each INCO Kit shall be comprised of the following parts:

INCO Kit Parts List Description Part Number QTY per Kit

Chassis, 3824 Storage System GQA24-ASCH-001G 3 Power Supply, 3824 Storage System GQACB-ASPW-A01R 3 iSCSI Controller, 3824 Storage System GQABJ-ASPC-C01R 3 300GB 15K SAS Drive, 3824 Storage System GQA24-ADHS-S3FR 10 1TB Dual Port SAS Drive, 3824 Storage System GQA24-ADHS-SACR 10 SFP Module, 10GigE, 3824 Storage System GQABB-ATSS-10PR 5 Chassis, 3U RES HD 518-121990-L01 2 Chassis, XR5 RES HDC Processor Module 518-122055-L02 3 Power Supply, 3U RES HD, 1.2KW AC 518-122936-L02 5 Chassis, XR5 RES 1U FIO Management Server 531-100098-5559 1 Fan Module, 1U FIO Management Server 531-122331-L01 5 Memory Board, 8 GB DDR4-2400 518-122404-L08 10 NIC, PCI-E Dual 40GBE/56GBE 518-121833-L01 5

SSD, 128GB, M.2 518-121618-L02 10

Power Supply, 1U FIO Management Server, AC 750W 531-122936-L01 5 Chassis, SX-1410 Switch 1505028-01 1 Power Supply, SX-1410 Switch 518-122114-L01 2 Fan Module, SX-1410 Switch 518-122115-L01 4 Switch, RES HD, 16-Port, 10/100/1000 518-122193-L01 1 SFP Module, 1000BaseT MC3208411-T 10 SFP Module, 10GBase-SR MFM1T02A-SR 8 SFP Module, 10GBase-LR MFM1T02A-LR 5 SFP Module, 40GBase-SR4L MC2207411-SR4L 12 SFP Module, 1000Base-LX AXG90582 5 Power Distribution Unit (PDU), 220VAC Dual Input RPS-PDU-1U-220D-C91615 2

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

STATEMENT OF WORK

Statement of Work Common Processing System (CPS) Sustainment, Installation, Procurement, and Engineering Services

1. INTRODUCTION

This Statement of Work (SOW) defines the efforts required for the limited manufacture, assembly, and test of the Common Processing System (CPS) equipment, spares, and associated technical services. The SOW also defines the efforts required to provide AN/UYQ-107B CPS Ordnance Alteration (ORDALT) Kits and related procurements, products, installation and harvesting services to the Air Dominance Department of the Naval Surface Warfare Center, Port Hueneme Division (NSWC PHD), Port Hueneme California. Additionally, this SOW defines the efforts required to provide Engineering Services, Supportability and Life Cycle Support and related procurements to NSWC

PHD.

NSWC PHD is a field activity of Naval Sea Systems Command (NAVSEA) and is the In-Service Engineering Agent (ISEA) for the CPS.

2. BACKGROUND

The CPS provides a common computing infrastructure for ship combat systems. The CPS is a continuously evolving family of processor and network storage systems, designed to satisfy a wide spectrum of mission critical and mission essential software applications. The CPS maximizes flexibility and functional modularity by incorporating Commercial-Off-The-Shelf (COTS) Non-Developmental Item (NDI) hardware and software compliant with Open Architecture Computing Environment (OACE) technologies and standards. These components integrate together using industry-accepted software and communication interface standards in accordance with System Requirements Documents (SRDs).

The Common Processing System (CPS) consists of the CPS Enclosure Assembly including power, cooling and hotel services and three subsystems: The Processing Subsystem, the Storage/Extraction Subsystem, and the input/output (I/O) Subsystem. The Processing Subsystem provides the computing resources to execute Navy combat system application programs on Navy platforms. The Storage/Extraction Subsystem provides the mass storage resources required for Operating System (OS) image storage, program storage, data extraction, and database management. The I/O Subsystem provides the resources required to interface the processing and storage hardware to various external elements. Through its ability to host multiple types of software applications, the CPS provides the processing resources for multiple Combat/Weapons systems.

The CPS production equipment was designed, developed and delivered under NAVSEA Production Contract Numbers N00024-09-D-5212 and N00024-14-D-5213.

Resident in the current fielded Technology Insertion (TI)-12 AN/UYQ-107’s are an IBM Blade Server and an IBM Storage/Extraction Array. Resident in the current fielded TI-12R AN/UYQ-107A are an IBM Blade Server and Dot Hill storage system. The sale of the IBM Blade Server x86 Product Line to Lenovo, the foreign-owned Original Equipment Manufacturer (OEM) in 2014, triggered a corresponding restriction from the Department of Homeland Security (DHS) on procuring IBM parts that were manufactured after 2014. The subsequent TI-12H AN/UYQ-107B development eliminated the restricted items and addressed Dot Hill storage system obsolescence; resident in the TI- 12H are a Mercury XR5 Server and a Quantum 3824 Storage System. The ORDALT Kits procured under this contract are intended to perform a technical refresh of the IBM Blade Server x86 product line and obsolete Dot Hill Storage product line in existing AN/UYQ-107 and AN/UYQ-107A Cabinets in order to update the Cabinets to the TI-12H AN/UYQ-107B configuration.

3. SCOPE

This requirement will provide for engineering, logistics, installation, and limited equipment production services including any ORDALT Kits, spare parts and materials required to provide Life-Cycle support for CPS equipment.

The Contractor shall furnish all labor and materials, except for the Government Furnished Information (GFI) identified in the contract. Program information, deliveries and data shall be handled in accordance with Government instruction.

This requirement will also provide for products and services anticipated to build, test and install the CPS TI-12H ORDALT Kits. The Contractor shall manufacture, test, and deliver the ORDALT Kits in accordance with the applicable Technical Data Package (TDP) and associated GFI provided under this contract. CPS TI-12H ORDALT Kit installations are expected in the below listed United States Navy (USN) and Foreign Military Sales (FMS) programs and other programs as required:

Aegis Weapon System (AWS), Sponsor – Program Executive Office Integrated Warfare Systems (PEO

IWS) 1.0

Aegis Ashore – PEO IWS 1.0 / Missile Defense Agency (MDA) Surface Electronic Warfare Improvement Program (SEWIP) – PEO IWS 2.0 Gun Weapon System (GWS) – PEO IWS 3.0

Air Warfare Destroyer (AWD)/Naval Fires Control System (NFCS) – PEO IWS 3.0/PEO IWS 4.0 Japanese Modernization (JAMOD) – PEO IWS 4.0 Aircraft Carrier Tactical Support System (CV-TSC) – PEO IWS 5.0 Maritime Integrated Air and Missile Defense Planning System (MIPS) – PEO IWS 6.0 Ship Self Defense System (SSDS) – PEO IWS 10.0

The CPS TI-12H ORDALT Kits are anticipated to be installed on AEGIS Destroyers (DDGs), AEGIS Cruisers (CGs), Landing Helicopter Deck (LHDs), Landing Ship Dock (LSD), Air Craft Carriers (CVNs) and Japanese Destroyers.

This contract will allow multi-user enterprise to sustain in-service CPS equipment in a “post-production” environment.

4. APPLICABLE DOCUMENTS AND STATEMENTS

4.1 Applicable Documents

The following documents form part of the SOW to the extent specified herein. In the event of a conflict between the documents referenced herein and the contents of this SOW, the SOW shall be considered the superseding requirement.

4.1.2 Government Documents

Document # Title SL720-AA-MAN-030 Navy Modernization Process Management and Operational Manual (NMP-MOM)

(Latest Version) MIL-STD-1662C (OS) Preparation of Ordinance Alteration (ORDALT) Instructions (Latest Version) DoDINST 8510.01 Change 2 Risk Management Framework (RMF) for DoD Information Technology (IT) NAVSEA 4130.12B CM Policy and Guidance (Latest Version) NAVSEA 4130.6 (ORDALT) Instruction Control Procedures (Latest Version) NAVSEA 4130.9 Configuration Control Procedures for Preparation and Implementation of

ORDALTS (Latest Version) NAVSEA 4720.11C Shipboard Installations and Modifications Performed by Alteration Installation

Teams (Latest Version) NAVSEA Technical Specification 9090.310

Alterations to Ships Accomplished by Alteration Installation Team (Latest Version)

NAVSEAINST 4790.8 (Series) Ships’ Maintenance and Material Management (3-M) (Latest Version) PEOIWSINST 4130.1B) Program Executive Office (PEO) for Integrated Warfare Systems (IWS) Enterprise

Configuration Control Process Latest Version) MIL-HDBK Program Executive Office, Integrated Warfare Systems (PEO IWS) – Deputy

Commander, Naval Sea Systems Command Warfare Systems Engineering Directorate (NAVSEA 05H) Technical Review Manual (TRM), 18 December

PEO IWS Program Plan Diminishing Manufacturing Sources and Material Shortages (DMSMS) Plan August 2005

PEOIWSINST 4130.1C

PEO IWS Enterprise Configuration Control Process

NAVSEAINST 5000.8 Naval SYSCOM Risk Management Policy 21 JUL2008

PEO IWS 1.0 TI CMP

3063214

Technical Insertion Configuration Management Plan (CM Planning to release new updated version to include not only TI-12 but TI-16 and follow on. 20 Aug

NAVESEAINST 4130.12B Configuration Management Policy and Guidance

NAVSEAINST 4160.3 Technical Manual Management Program (TMMP) (Latest Version)

NSWCPHD INSTRUCTION

5239.4

Cyberspace Information Technology And Cybersecurity Workforce Qualification Program

4.1.3 Joint Chiefs of Staff, Department of Defense, and DoD Services Documents

Defense Acquisition Guidebook 4.3.3.4.7, https://dag.dau.mil

Production Readiness Reviews (PRR)

DoD 5220.22M Defense Security Service (DSS) National Industrial Security Program Operating manual (NISPOM), 28 February 2006

4.1.4 Military Standards (MIL-STD)

MIL-STD-129P DoD Standard Practice, Military marking for Shipment and Storage, 19 September

MIL-STD 130N Department of Defense Standard Practice Identification Marking of U.S. Military

Property, 15 June 2007 MIL-STD-2073-1E DoD Standard Practice for Military Packing, 7 January 2011

4.1.5 Other Military Documents

MIL-D-23140D Drawings, Installation Control, for Shipboard Electronic Equipment MIL-DTL-31000C Technical Data Packages, Detail Specification MIL-P-24534A Planned Maintenance System: Development Of Maintenance Requirement Cards, Maintenance Index Pages, and Associated Documentation MIL-PRF-29612B Training Data Products

4.1.6 Handbooks

MIL-HDBK-61A Configuration Management Guidance MIL-HDBK-881A Work Breakdown Structures For Defense Materiel Items

4.1.7 Non-Government / Commercial Standards

ANSI/ASQC Q9001-2008 Quality Systems - Model for Quality Assurance in Design, Development, Production, Installation and Servicing American Society of Mechanical Engineers (ASME) ASME Y14.24-2012

Types and Applications of Engineering Drawings

American Society for Testing of Materials (ASTM) ASTM 1166- 07 (2013)

Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities

American Society for Testing of Materials (ASTM) ASTM F1337

- 10(2015)

Standard Practice For Human Systems Integration Program Requirements For Ships And Marine Systems, Equipment, And Facilities

Electrical & Electronics Engineers/Electronic Industries Alliance (IEEE/EIA) 12207-

Software Life Cycle Processes

International Organization for Standards (ISO) ISO 9001:2015

Quality Management Systems - Requirements

S0005-AA-PRO-010/TMMP NAVSEA Technical Manual Management Program S0300-A7-AEG-010, 020, 030 Aegis Style Guide for Development and Publication of Combat/Weapon System

Technical Manuals

4.2 Statements

4.2.1 This document is Unclassified, however, the classification of the work to be performed may require access to secure areas and classified information up to and including Secret per the attached Contract Security Classification Specification, DD Form 254. Security requirements will be identified by Technical Instruction. In the event a particular order requires revision, updates or additional security classification guidance, the DD Form 254 will either be revised, or a separate DD Form 254 issued for that order.

4.2.2 In accordance with SECNAV M-5510.30, the Navy Personnel Security Program Manual (Chapter 6, Section 6-6, Paragraphs 2b and 2c), Executive Order 13467 of June 30, 2008, as well as Homeland Security Presidential Directive 12 (HSPD-12) and United States Office of Personnel Management Memorandum, Final Credentialing Standards for Issuing Personal Identity Verification Cards under HSPD-12 dated 31 July 2008, the Contractor shall ensure that all individuals performing work on behalf of the Government have a current, favorably adjudicated background investigation of the appropriate type to determine fitness to perform work on behalf of the Government as a Contractor employee, perform sensitive national security duties, or have access to classified information. A background investigation equivalent to the current Tier requirement and which is still in scope is acceptable.

4.2.3 Contractor Employees who require access to Classified Information will be processed under the terms of the National Industrial Security Program (NISP) in alignment with the work requirements of the contract and Security Requirements on the applicable DD Form 254. Contractor employees who do not require access to classified information in performance of this contract but are assigned to sensitive national security duties, require access to sensitive information, or those that for other reasons require a fitness or trustworthiness determination shall be processed for the appropriate background investigation through the NSWC PHD Personnel Security Office for a Non-NISP investigation. Point of contact is the Personnel Security Specialist, (805) 228-7196.

4.2.4 NSWC PHD Command Security Manager (CSM) shall be made aware of any Contractor personnel who have an investigation with an action pending, eligibility has been administratively withdrawn or pending, withdrawal of interim clearance eligibility, eligibility of no determination made, or final denial or revocation of Security Clearance Eligibility.

4.2.5 The Contractor shall possess and maintain Cybersecurity Workforce Operating System/Computing Environment certifications required by Department of Navy (DoN).

4.2.6 Individuals who require IT-I level access to sensitive DoD and DoN IT systems require a favorably adjudicated Tier 5 investigation, and individuals who require IT-II level access to such systems require a Tier 3 investigation. All access to DoN IT systems is, at minimum, IT-II.

4.2.7 The Navy adopted Institute of Electrical & Electronics Engineers/Electronic Industries Alliance (IEEE/EIA) Standard 12207, Standard for Information Technology, in May 1998, as its basis for software development planning and acquisition. This standard defines a framework within which specific software development life cycles can be defined and provides a standard set of terminology to be used when describing these activities. This standard does not define any specific approach; it allows a wide variation of system life cycles and facilitating the customization of approaches to accommodate the needs of individual systems. The Contractor shall ensure compliance with the most recent IEEE/EIA Standard 12207. The Contractor shall demonstrate a level of competency with established processes commensurate with Capability Maturity Model Integration (CMMI) Q Level 3.

5. REQUIREMENTS

5.1 General Requirements

The Contractor shall manage and execute all activities under this contract, including those of any subcontractors, suppliers and sub-tier vendors.

5.1.1 The Contractor shall designate a Program Manager. The Program Manager shall have complete responsibility and authority for the planning, execution, control and reporting of all aspects of the Contractor’s efforts including Subcontractor efforts.

5.1.2 The Contractor shall prepare a Contractors Progress, Status & Management Report.

5.1.3 The Contractor shall prepare a monthly funding report.

5.1.4 The Contractor shall prepare a closeout financial report.

5.1.5 The Contractor shall maintain a list of personnel who have completed their training as specified in Section H.

5.1.6 The Contractor shall provide a list of personnel and their security clearance levels for all personnel working on this contract.

5.1.7 The Contractor shall prepare an Emergency Action Plan (EAP) associated to the services performed in this SOW. Contractors storing classified documentation and classified equipment at their facilities in accordance with tasking in this contract shall develop and maintain an EAP and provide a report.

5.1.8 The Contractor shall prepare a muster report as directed.

5.1.9 The Contractor shall prepare a HAZMAT/HAZWASTE report associated to the services performed in this

SOW.

5.1.10 The Contractor shall provide trip reports in support of the services performed in this SOW.

5.1.11 The Contractor shall upload the Contractor's Funds and Man-hour Expenditure Reports in the Electronic Cost Reporting and Financial Tracking (eCRAFT) System and submit the Contract Status Report on the same day and for the same timeframe the contractor submits an invoice into the Invoicing, Receipt, Acceptance, and Property Transfer (iRAPT) system. The amounts shall be the same. eCRAFT acceptance/rejection will be indicated by e-mail notification from eCRAFT. Compliance with this requirement is a material requirement of this contract.

5.1.12 In conjunction with the COR and Contracting Officer, the Contractor shall assign standard eCRAFT labor categories to each existing proposed and executed labor category on the Task Order/Contract.

5.1.13 Work under this contract requires access to classified information up to and including the Secret level. The tasks at the Secret level will be performed at NSWC PHD, other government locations and cleared contractor locations. Access to classified information is not required at the awarded contractor’s facility. Additional security classification guidance will be provided at the time of solicitation via DD Form 254.

5.2 Program Management and Control

The Contractor shall provide program management oversight to ensure all work conducted within this contract is planned and executed in a manner that will achieve all quality, schedule and cost objectives.

5.2.1 The Contractor shall provide an Integrated Master Schedule (IMS).

5.2.2 The Contractor shall provide Contract Work Breakdown Structure (CWBS).

5.2.3 The Contractor shall provide a Quality Program Plan (QPP)/ Quality Assurance Program Plan (QAPP).

5.2.4 The Contractor shall provide a Configuration Management Plan (CMP).

5.2.5 Periodic (Bi-Weekly) Management Review (PMR). Bi-Weekly PMRs shall be conducted in person at the Contractor’s plant or via teleconferencing with the Contractor providing a summary of its current program status to include information provided in the Contractor’s Progress, Status and Management Reports and any additional relevant information.

5.2.6 Quarterly Program Reviews. The Contractor shall conduct quarterly program reviews, beginning four (4) months after award of contract, to assess the Contractor’s progress and status. The Contractor shall provide, at a minimum, an overview of engineering and ORDALT development status, review of program Diminishing Manufacturing Sources and Material Shortages (DMSMS) status, including disclosure of any and all known DMSMS items, the planned action to mitigate its engineering and Integrated Logistic Support (ILS) impacts, and a report on small business utilization. The status of the Contractor’s efforts to achieve the requirements set forth in the contract will be emphasized. Vendor/subcontractor status and problems shall also be addressed; as such, vendors/subcontractors may support the review as required. In addition, a separate review may be conducted to cover a special set of circumstances or troublesome area(s), but the reviews shall be considered part of and conducted with the quarterly production review. An Action Item List shall be prepared and maintained by the Contractor during the life of this contract to enable tracing the closure of generated action items.

5.2.7 Risk Assessment and Management. The Contractor shall create and maintain a Risk Management Plan.

Contractor shall generate risk metrics in accordance with DODINST 8510.01, Risk Management Framework (RMF) for DoD Information Technology (IT) and reported as part of the Contractor’s Progress, Status and Management Report and during program reviews

5.2.8 The Contractor shall provide an end of contract transition plan.

5.3 Commercial Component Obsolescence Management

5.3.1 The Contractor shall monitor, identify, plan for and resolve DMSMS and obsolescence issues. The Contractor shall provide a DMSMS obsolescence notification report and DMSMS Implementation Plan.

5.3.2 The Contractor shall provide a proposed resolution plan that may include product upgrade, technology refresh, life time buys, bridge buys and/or a redesign to meet the requirements of the contract. DMSMS solutions shall be implemented in accordance with the NAVSEA 4130.12B Configuration Management Policy and Guidance.

5.3.3 The Contractor shall select products for production whose obsolescence is not less than one year past the end of production. The product lifetime equals the timeframe that the product can be purchased from the Original Equipment Manufacturer (OEM). Any products that do not meet this criterion must be approved by the Government ISEA prior to final product selection. For the purposes of this contract, hardware, software, and/or firmware shall be considered obsolete when the item can no longer be procured from the OEM.

5.3.4 The Contractor shall provide a report of recall notices from suppliers of materials, components or products in the CPS equipment.

5.3.5 The Contractor shall provide a technical report of recommendations to resolve all Contractor or Government identified obsolescence issues.

5.3.6 DMSMS Forecasting Source Data. The Contractor shall perform DMSMS obsolescence surveillance.

Contractor shall submit a DMSMS Health Analysis and Forecasting Bill of Materials Report for all CPS configurations to support production and/or changes to CPS system implemented during production.

5.4 Procurements

5.4.1 The Contractor shall procure production equipment, piece parts, ORDALT Kits, spares, and firmware required to provide Life Cycle Support for CPS equipment.

5.4.2 The Contractor shall procure equipment, piece parts, ORDALT Kits, INCO Spares, On Board Allowance (OBA) Spares, parts and firmware required for TI-12H CPS equipment upgrades.

5.4.3 The Contractor shall procure parts, materials and replacements for ORDALT Kit items that become obsolete. The Government will specify requirement through approved Engineering Change Proposals (ECP) or Technical Instruction.

5.4.4 The Contractor shall accurately document, track materials and purchased parts, provide “As Built” Configuration Lists (ABCL) for all kits, and provide a material procurement plan which includes effective procedures to determine material needs, lead times, and delivery schedule.

5.4.5 The Contractor shall provide packaging, shipping and tracking of ORDALT Kits, Materials, or Lowest Replaceable Units (LRUs) for delivery as specified by the Government.

5.4.6 The Contractor shall apply DoD Item Unique Identification (IUID) markings to the CPS units at the unit level assemblies and associated LRUs in accordance with the TDP.

5.4.7 The Contractor shall adhere to the existing CPS Packaging Handling, Storage and Transportation (PHS&T) Plan to be provided as GFI.

5.4.8 The Contractor shall provide certificates of compliance and ensure International Traffic in Arms Regulations (ITAR) compliant products adhere to the procurement screening process.

5.5 Reliability Engineering, Failure Analysis, Monitoring and Redesign

5.5.1 The Contractor shall provide services required to plan, implement, conduct, and support a tailored Reliability and Maintainability (R&M) program. The Contractor shall have a system for collecting and recording all failures (both critical and non-critical) which occur during all tests, inspection procedures, and installations.

Individual failure records shall include, as a minimum, the failure record number, part number, name, manufacturer, date of failure, operating hours, problem description, investigation procedures, corrective action status and corresponding ECP number when applicable.

5.5.2 The Contractor shall review field failure data from sites, shipyards and the fleet to identify problems impacting CPS R&M characteristics and to determine adverse trends. All failures shall be analyzed and corrective action implemented to preclude recurrence of the failure. The effectiveness of the corrective action shall be evaluated by the continued review of Failure Records.

5.5.3 The Contractor shall provide services to conduct root cause analysis and recommend corrective actions.

Investigations shall be performed to establish root cause of failure and corrective action for R&M problems and failure trends and failure analysis reports shall be provided detailing root cause of failure trend.

5.5.4 The Contractor shall monitor and report all installation and testing failures as requested by Government.

The contract shall provide a Technical Report.

5.5.4.1 The Contractor shall establish a Problem Review Board (PRB) to be held on a quarterly basis to review all CPS user failures and production failures to identify reliability or quality problems and failure trends, and to discuss the investigation and corrective action status for those items. The PRB shall monitor trends at Combat System integration sites/ ships and production facilities. The Contractor shall provide minutes and a technical report.

5.5.4.2 The Contractor shall coordinate with the ISEA to prevent duplication of effort. Contractor PRB members shall include appropriate representatives from Design, Reliability and Maintainability, System Safety, Manufacturing, and Quality…