N6339418R0009-0004.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to:

1) Provide Government responses to all remaining questions received to date;

2) Incorporate the missing draw ings into the TDP; and

3) Extend the proposal due date to 15 November 2018 at 12:00 p.m. (PST).

1. CONTRACT ID CODE PAGE OF PAGES

J 1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 22-Oct-2018

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N6339418R0009

X 9B. DATED (SEE ITEM 11)

12-Sep-2018

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

22-Oct-2018

CODE

N63394

PORT HUENEME DIVISION 4363 MISSLE WAY

PORT HUENEME CA 93043-4307

N63394 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N6339418R0009

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

Q&A #3

1. QUESTION: Regarding the subject solicitation, after review we have found that the following drawings and documents are not included in the package. Please advise as to whether you can provide the following:

Motor Control Panel (missing drawings):

a. 5598018-1 used to make 7103916, 7103917. Due to the small quantities involved, could USG provide the previous casting supplier?

b. Drawings 5598014 and 5598015 made from a stock piece machined or cast? -4 state machined, out of what material? Cast material is A356, machine material 6061-tT6?

c. WS19167 CODING, FAB, INSPECT OF RIVETS

d. WS19185 MARKING OF ITEMS, PROCESS SPEC

e. WS20267 MOTOR CONTROL PNL & MDL PWR SYS

Programmable Power Supply (missing drawings):

a. 5598733-01

b. WS20334 CRITICAL ITEM PERFORMANCE SPEC

c. WS20130 PRODUCTION ENVIORNMENT TEST REQ

d. WS19182 APPLICATION OF SILICONE ADHESIVE

e. WS19176 BONDING WITH ADHESIVE EPOXY

f. WS19169 BONDING WITH ADHESIVE SILICONE

g. WS20120 VLS LEAD FREE CONTROL PLAN

h. WS19179 FAB AND INSTL OF CABLE ASSYS

i. WS19202 ELEC HARNESS AND INTCON NETWORKS

j. WS19177 EPOXY ADHESIVE

k. WS19201

In addition, we are requesting an adjustment of the response date for an additional week to Thursday, 15 November 2018. This is due to the requested documents as well as waiting on vendors who are still in the process of responding, and to solicit quotes on the casting.

RESPONSE: The missing drawings have been uploaded to FBO.gov for downloading by all parties that have been approved for explicit access. DRS at Fort Walton Beach currently makes the MCP; however, the casting supplier is unknown. 5598014D Nor 018 adds a -4 configuration (mainly adding a J1 connection variant). The machining is referring to machining of the casting, not from block material. For 5598014D NOR 019 and 5598015D NOR 19, the Casting Part Number is -2 and is defined as Material A356.0, Class II, Grade C in accordance MIL-A-21180 and is defined on Sheets 1 and 2. The casting is then machined and the Machined Part Numbers are -1 or -3 and is defined on Sheets 3 - 5. The proposal response date is extended to 15 November 2018.

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 07-Nov-2018 04:00 PM to 15-Nov-2018 12:00 PM.

(End of Summary of Changes)

N6339418R0009