24-Q-2688 Q and A 1.pdf
PDF 108 KB Posted
- Attached to
- Crane and Operator Rental
- Solicitation number
- N6247824Q2688
About this file
This document is a set of Questions and Answers (Q&A) related to Solicitation Number N6247824Q2688 for a Crane and Operator Rental contract. The key details are:
The solicitation seeks a contractor to provide a crane and certified crane operator to support lifting ship and submarine brows, shore power cables, palletized loads, and other miscellaneous items during the RIMPAC 2024 exercise. The crane must not exceed a single axle load weight of 22,650 lbs due to pier loading restrictions, and the maximum lift weight is 4,000 lbs. The contractor shall provide all materials, supplies, equipment, transportation, freight, and labor to support the government. NAVFAC HI Crane and Rigging shops will provide a work leader and rigger/signalman for rigging and sending loads. The Q&A clarifies that the crane must have a single axle configuration, with an axle spacing of over 6 feet, and provides examples of suitable 15-ton and 18-ton cranes that could meet the requirements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 24-Q-2688 Q and A 2.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
5-17-24 N62478-24-Q-2688 Question and Answers 1
Question: "Crane must not exceed a single axle load weight of 22,650 lbs due to pier loading restrictions"; if the equipment is equipped with tandem axles, will theses 2 axles be treated as 1 single axle or as 2 single axles?
Answer: We only want single axle load because some of the piers in question only allows single axle loading, and does not have tandem axle load factors.
Question: Is there a specific axle spacing that would qualify the 2 axles as single axles?
Answer: To meet single axle requirement, the axle spacing needs to be over 6’ (Front and rear axle).
Question: Maximum lift is stated to not exceed 4,000 lbs, but there is not a maximum Lift Radius that this load will need to be lifted to nor a minimum boom length required.
Answer: Maximum 70’ boom, and 40’ radius to deliver brow and shore power cables.
An example of a type of crane that fits the requirement it would be a Broderson 15 ton crane or a Grove 18 ton crane.
File details come from the government source that posted it. Updated .