SOW.docx

Naval Oceanographic Office Statement of Work Fabrication of Machined Parts for Code N93 11/2/2015

Introduction. . The objective of this Statement of Work (SOW) is to procure a quantity of these machined parts and describes the requirements the contractor shall meet to successfully execute this contract.

Overview and Government Furnished Materials. The contractor shall fabricate the machined parts listed in Attachment A for code N93 of the Naval Oceanographic Office. NAVOCEANO will provide the bare aluminum tubing (Length: 12’2”, OD 8.5”, ID 7.75” Aluminum type 7075-T6511) for parts EA-BM-0161-03-101 rev C and EA-BM-0161-03-103 rev C. The contractor is to provide the raw materials for all other parts listed in this SOW.

Vendor Certifications. The contractor shall be ISO 9001:2008 certified in the quality management system for the manufacture of customized machined, fabricated, and assembled parts for commercial, defense, and aerospace applications.

Quality Control and Quality Assurance. The contractor shall ensure all delivered parts conform to the drawings listed in Attachment A. The vendor’s Quality control (QC) form shall at a minimum meet SAE-AS9102 Revision A standards. With each delivery, the contractor shall include all QC documentation generated for all parts. QC documentation shall include, but not be limited to, Material Certifications, Dimensional Reports, final QC Inspection Reports, and the Anodizer’s Certificate of Compliance (CofC).

Anodization. The contractor shall have all machined parts requiring anodization anodized and finished according to the provided drawings. The contractor shall use an anodizing vendor, who is National Aerospace and Defense Contractor’s Accreditation Program (NADCAP) certified in hard coat anodizing and nickel and dichromate sealing per MIL-A-8625F Type III, Class I for 7075-T6 aluminum and Type III, Class I and Class II for 6061-T6 aluminum. The subcontractor’s process for touchups performed in accordance with MIL-A-8625F paragraph 3.3.4 shall be approved by the government. Government approval is required for all touchups. The government will not accept any touchups for surface areas that are abrasion and O-Ring surfaces. The contractor is ultimately responsible for ensuring the delivered parts conform to the specifications listed in this SOW and the associated drawings. If during the life of this contract the contractor identifies another anodizer with the required certifications, government approval is required before the contractor is allowed to give EARS machined parts to the anodizer for anodization.

EARS Pressure Vessel Parts. The contractor shall fabricate EARS pressure vessel parts for NAVOCEANO according to Attachment A. Delivery shall occur in accordance with the delivery schedule below.

GS-11 Assembly Parts. The contractor shall fabricate NAVOCEANO GS-11 sensor package parts according to Attachment A. Delivery shall occur in accordance with the delivery schedule below.

Oscar Assembly Parts. The contractor shall fabricate NAVOCEANO Oscar parts according to Attachment A. Delivery shall occur in accordance with the delivery schedule below.

Delivery Schedule.

EARS Pressure Vessel Delivery Schedule (All dates referenced ARO):

EA-BM-0161-03-103 Rev. C

EA-ME-0911-14 Rev. C

EA-ME-0912-14 Rev. D

GS-11 Assembly Parts Delivery Schedule (All dates referenced ARO):

EA-BM-0260-04-101 Rev. A

EA-BM-0261-04-101 Rev. B

EA-BM-0262-04-101 Rev. A

EA-ME-0548-09-101 Rev. B

EA-ME-0549-09-101

EA-ME-0550-09-101

EA-ME-0571-10-101 Rev. A

EA-ME-0572-10-101 Rev. A

EA-ME-0574-10-101 Rev. B

EA-ME-0575-10-101 Rev. B

EA-ME-0576-10-101 Rev. B

EA-ME-0577-10-101 Rev. B

EA-ME-0578-10-101 Rev. B

EA-ME-0579-10-101

EA-ME-0634-10-101

EA-ME-0445-08

EA-ME-0573-10 Rev. A

EA-ME-0111-04 Rev. B

Oscar Assembly Parts Delivery Schedule (All dates referenced ARO):

EA-ME-0334-06 Rev. A

EA-ME-0335-06 Rev. C

EA-ME-0338-06 Rev. E

EA-ME-0339-06 Rev. C

EA-ME-0347-06 Rev. A

EA-ME-0348-06 Rev. A

EA-ME-0349-06 Rev. A

EA-ME-0356-06 Rev. A

EA-ME-0357-06 Rev. A

EA-ME-0365-06 Rev. A

EA-ME-0498-08 Rev. -

Delivery Requirements. All parts shall be delivered by the contractor to the following address:

Attn: Eula Woods Naval Oceanographic Office 1002 Balch Blvd.

Bldg. 9134 Stennis Space Center, MS 39522-5001 Phone: 228-689-8386 Fax: 228-689-8397

Specialty packaging for shipping and transportation of the 7075-T6 aluminum end caps and pressure tubes will be provided by the government; the contractor shall be responsible for all other packaging. All parts listed in this contract will be examined within 30 days to determine acceptability. If further testing and analysis is required to evaluate acceptability then the contractor will be notified by the NAVOCEANO Contracts office. Partial delivery of items prior to the deadlines is acceptable.

TPOC. Technical Point of Contact for this contract is Robert Clark.

Attachment A