drawings_31-38.pdf
PDF 303 KB Posted
- Attached to
- EARS MACHINE PARTS
- Solicitation number
- N62306-16-T-A004
About this file
ATTACHMENT 6 DRAWINGS 31-38
View the file
Other files
| File | Type | Posted |
|---|---|---|
| N62306-16-T-A004.doc | DOC document | |
| SOW.docx | DOCX document | |
| drawings_11-20.pdf | ||
| Instructions.docx | DOCX document | |
| drawings_21-30.pdf | ||
| drawing_1-10.pdf | ||
| PRICING_OF_PARTS.xlsx | XLSX spreadsheet | |
| N62306-16-T-A004_LSJ_fbo.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
R2.125
R.250 2X
2X 60°
2X R1.000
2X R1.000
3X .250 THRU
6X .136 THRU
THD #8-32 UNC .400
BOTH SIDES
.4
.8
1.
1.
0.8
.8
1.
1.
2.
2.
.250
2.170
1.472
1.472
.688
.688
2.125
1.
1.
1.375
1.375
A
A
1.000 6X
1.260 12X
12X .250
SECTION A-A
2X .136 .484
THD #8-32 UNC .328
.8
.8
.500
4X .136 .484
THD #8-32-UNC .328
2.
2.
2.
2.
.150
.850
.252
.250
R FULL
.250
.5
1.
(TYP. BOTH SIDES)
NOTES:
BREAK OR DEBURR ALL SHARP EDGES.1.
2. MATERIAL: 6061-T6 ALUMINUM.
NONE.
REVISIONS
ZONE REV. DESCRIPTION DATE APPROVED
A REMOVED ALODINE FINISH 11/9/2010 JCM
B CHANGED SLOT TOLERANCE 7/28/2011 JCM
TITLE
SIZE DWG. NO. REV.
FULL SCALE SHEET 1 OF 1
U.S. NAVAL OCEANOGRAPHIC OFFICE
CODE N91 BLDG 9322
STENNIS SPACE CENTER, MS 39522
EA-ME-0576-10C
Y-AXIS MID PLATE
CAD GENERATED DRAWING
DO NOT SCALE OR
MANUALLY UPDATE
DRAWN
ENGR
CHECKED
DATE
JCM 2/1/09
APPROVALS
A
B B
A
C
D
C
D
3 2 1
ALL DIMENSIONS APPLY AFTER FINAL FINISH
INTERPRET DIM. AND TOL.
PER ASME Y14.5M-1994
DIMENSIONS IN INCHES
TOLERANCE ON DECIMALS
.XX .03
.XXX .010
FRACTIONS 1/16
TOLERANCE ON ANGLES
X .5 X.X .05
X.XX .005
MAX. SURF. FINISH 128
B
0.507 X 82°
0.266 THRU ALLA
A
0.900
0.125
15°
0.591
0.150
0.325
SECTION A-A
CH 0.015 X 45
NOTES:
BREAK OR DEBURR ALL SHARP EDGES.1.
2. MATERIAL: 6061-T6 ALUMINUM.
FINISH: NONE.
REVISIONS
ZONE REV. DESCRIPTION DATE APPROVED
A 11/9/2010
B REMOVED ALODINE FINISH 11/9/2010 JCM
TITLE
SIZE DWG. NO. REV.
SCALE: 6X SHEET
U.S. NAVAL OCEANOGRAPHIC OFFICE
CODE N91 BLDG 9322
STENNIS SPACE CENTER, MS 39522
EA-ME-0577-10C
SHAFT BEARING CAP
CAD GENERATED DRAWING
DO NOT SCALE OR
MANUALLY UPDATE
DRAWN
ENGR
CHECKED
DATE
DRF 10/16/09
APPROVALS
A
B B
A
C
D
C
D
3 2 1
ALL DIMENSIONS APPLY AFTER FINAL FINISH
INTERPRET DIM. AND TOL.
PER ASME Y14.5M-1994
DIMENSIONS IN INCHES
TOLERANCE ON DECIMALS
.XX .03
.XXX .010
FRACTIONS 1/16
TOLERANCE ON ANGLES
X .5 X.X .05
X.XX .005
MAX. SURF. FINISH 128
1.550
0.250 X 90°, NEAR SIDE
1/4-28 UNF 0.630
0.213 0.750
0.507 X 82°
3X 0.266 THRU ALL
A
A
2.250 2.249
0.250
0.370
0.787
R0.060
0.063
15°
R0.015
0.5900 0.5890
1.00
0.010
SECTION A-A
CH 0.03 X 45
MATERIAL: 17-4 PH S.S.
REVISIONS
ZONE REV. DESCRIPTION DATE APPROVED
B 1 ELIMINATION OF CENTERING BOSS TOL ADDED TO O.D. 8/23/2011 DRF
B 2 ADDITION OF RELIEF 8/23/2011 DRF
TITLE
SIZE DWG. NO. REV.
SCALE SHEET
U.S. NAVAL OCEANOGRAPHIC OFFICE
CODE N91 BLDG 9322
STENNIS SPACE CENTER, MS 39522
EA-ME-0578-10C
THREADED FLANGED SHAFT
CAD GENERATED DRAWING
DO NOT SCALE OR
MANUALLY UPDATE
DRAWN
ENGR
CHECKED
DATE
DRF 08/23/11
APPROVALS
A
B B
A
C
D
C
D
3 2 1
ALL DIMENSIONS APPLY AFTER FINAL FINISH
INTERPRET DIM. AND TOL.
PER ASME Y14.5M-1994
DIMENSIONS IN INCHES
TOLERANCE ON DECIMALS
.XX .03
.XXX .010
FRACTIONS 1/16
TOLERANCE ON ANGLES
X .5 X.X .05
X.XX .005
MAX. SURF. FINISH 128
2X R1.45
2X .177 THRU
.332 X 82
.257 THRU
FAR SIDE
.559 X 82
.8
1.
.8
1.
.500
.500
.900
.900
.50
NOTES:
BREAK OR DEBURR ALL SHARP EDGES.1.
2. MATERIAL: BRASS, ALLOY 360
FINISH: NONE.
TITLE
SIZE DWG. NO. REV.
FULL SCALE SHEET 1 OF 1
U.S. NAVAL OCEANOGRAPHIC OFFICE
CODE N91 BLDG 9313
STENNIS SPACE CENTER, MS 39522
EA-ME-0579-10B
Y-AXIS WEIGHT
CAD GENERATED DRAWING
DO NOT SCALE OR
MANUALLY UPDATE
DRAWN
ENGR
CHECKED
DATE
JCM 2/2/10
APPROVALS
INTERPRET DIM. AND TOL.
PER ASME Y14.5M-1994
DIMENSIONS IN INCHES
TOLERANCE ON DECIMALS
.XX .030
.XXX .010
FRACTIONS 1/16
TOLERANCE ON ANGLES
X .5 X.X .05
X.XX .005
MAX. SURF. FINISH 128
2 1
A
B B
A
ALL DIMENSIONS APPLY AFTER FINAL FINISH
3X .177 THRU
.38 X 82
.257 THRU
FAR SIDE
.559 X 82
.400
.800
.6
.6
.50
2.000
NOTES:
BREAK OR DEBURR ALL SHARP EDGES.1.
2. MATERIAL: BRASS, ALLOY 360
FINISH: NONE.
TITLE
SIZE DWG. NO. REV.
FULL SCALE SHEET 1 OF 1
U.S. NAVAL OCEANOGRAPHIC OFFICE
CODE N91 BLDG 9313
STENNIS SPACE CENTER, MS 39522
EA-ME-0634-10B
GS-11 GEOPHONE WEIGHT
CAD GENERATED DRAWING
DO NOT SCALE OR
MANUALLY UPDATE
DRAWN
ENGR
CHECKED
DATE
JCM 1/2/10
APPROVALS
INTERPRET DIM. AND TOL.
PER ASME Y14.5M-1994
DIMENSIONS IN INCHES
TOLERANCE ON DECIMALS
.XX .030
.XXX .010
FRACTIONS 1/16
TOLERANCE ON ANGLES
X .5 X.X .05
X.XX .005
MAX. SURF. FINISH 128
2 1
A
B B
A
ALL DIMENSIONS APPLY AFTER FINAL FINISH
.5
1.500
1.500
0.775
0.388
.6
MM/YY
0911C
2X
0.313 1.00 MAX.
THD 3/8-16UNC-2B 0.75 MIN.
USE GH3 TAP
3X
0.213 0.750
THD 1/4-28UNF-2B 0.630
USE GH11 TAP.
8.35 8.30
Z
Z
6.878 6.876
7.097 7.095
2.253 2.251
0.250
0.030 X 45
.2
.0
.9
2.172
2.513
6.687
7.028
Y W
X
SECTION Z-Z
R0.100
4X R0.035 0.020
2X R0.035
0.020 2X R0.020
0.015
2X 0.192 0.187
R0.080
R0.100
DETAIL Y
SCALE 4 / 1
O-RING 2-261 (REF.)
2X
2X 642X 64
R0.50
R0.50
10° (REF.)
DETAIL W
SCALE 2 / 1
R0.50
R0.50
10° (REF.)
0.030
DETAIL X
SCALE 2 / 1
C
NOTES:
1 SURFACE INDICATED IS AN O-RING SEALING SURFACE
AND SHALL BE FREE OF SCRATCHES, NICKS, DENTS AND
SIMILAR DEFECTS.
2. FINISH: HARD ANODIZE AND SEAL PER MIL-A-8625F
TYPE III, CLASS 1, 0.0020 0.0005 THICK (0.0010 BUILDUP).
DICHROMATE SEAL. CONTACT AT INDICATED
FEATURES ONLY. ANODIZE ALL THREADS UNLESS NOTED.
ALL DIMENSIONS APPLY AFTER ANODIZING.
3 USE FEATURES INDICATED ONLY TO RACK PART FOR HARD ANODIZING.
DEFECTS IN ANODIZING WHICH EXPOSE BASE METAL ARE PERMISSIBLE ONLY
AT THESE RACK POINTS.
4 ENGRAVE FABRICATION DATE AS "MM/YY" AND CENTRAL 4-DIGITS OF DRAWING NUMBER PLUS
REVISION LETTER AS SHOWN IN 0.20 - 0.30 HIGH LETTERS.
5. MATERIAL: 7075-T6 ALUMINUM PLATE. MATERIAL CERTIFICATIONS
SHALL BE KEPT ON RECORD BY CONTRACTOR AND AVAILABLE FOR
REVIEW BY NAVO.
6. MATERIAL SHALL NOT BE PLASMA CUT. WATER OR SAW CUT
ARE PERMISSABLE.
REVISIONS
ZONE REV. DESCRIPTION DATE APPROVED
C4 C
REDRAWN WITH NEW DRAWING NUMBER. O-RING
DETAILS AS EA-BM-0112-03 REV C. CHANGED CBORE
TOLERANCE TO 2.251/2.253
2/19/2014 JCM
TITLE
SIZE DWG. NO. REV.
FULL SCALE SHEET 1 OF 1
U.S. NAVAL OCEANOGRAPHIC OFFICE
CODE N91 BLDG 9322
STENNIS SPACE CENTER, MS 39522
EA-ME-0911-14D
EARS G2 ENDCAP,
TRIAX BLANK
CAD GENERATED DRAWING
DO NOT SCALE OR
MANUALLY UPDATE
DRAWN
ENGR
CHECKED
DATEJCM 2/19/14
APPROVALS
INTERPRET DIM. AND TOL.
PER ASME Y14.5M-1994
DIMENSIONS IN INCHES
TOLERANCE ON DECIMALS
.XX .03
.XXX .010
FRACTIONS 1/16
TOLERANCE ON ANGLES
X .5 X.X .05
X.XX .005
MAX. SURF. FINISH 128
A
B B
A
C
D
C
D
3 2 1
ALL DIMENSIONS APPLY AFTER FINAL FINISH
5 3 2 1
C
1.500
1.500
0.775
0.388
2.719
MM/YY
0912D
2X
0.313 1.00 MAX.
THD 3/8-16UNC-2B 0.75 MIN.
USE GH3 TAP
33X
0.213 0.750
THD 1/4-28 UNF-2B 0.630
USE GH11 TAP
2X
0.201 0.750
THD 1/4-20 UNC-2B 0.500
USE GH11 TAP
D
8.35 8.30
2.300
2.300
Z
Z
0.938 THRU
THD 1-14 UNS-2B (GH11 REF.) 1.50
1.050 X 90
FAR SIDE 1.190 X 90
0.453 THRU
THD 1/2-24 UNS (GH3 REF.) 1.00 MIN.
0.938 0.45
THD 1-14 UNS-2B (GH11 REF.) 0.38 MIN.
1.050 X 90
6.878 6.876
7.097 7.095
2.253 2.251
0.250
0.030 X 45
.0
.9
2.172
2.513
6.687
7.028
Y W
X
SECTION Z-Z
R0.100
4X R0.035 0.020
2X R0.035
0.020 2X R0.020
0.015
2X 0.192 0.187
R0.080
R0.100
DETAIL Y
SCALE 4 / 1
O-RING 2-261 (REF.)
C
2X
2X 642X 64
R0.50
R0.50
10° (REF.)
DETAIL W
SCALE 2 / 1
R0.50
R0.50
10° (REF.)
0.030
DETAIL X
SCALE 2 / 1
C
NOTES:
1 SURFACE INDICATED IS AN O-RING SEALING SURFACE
AND SHALL BE FREE OF SCRATCHES, NICKS, DENTS AND
SIMILAR DEFECTS.
2. FINISH: HARD ANODIZE AND SEAL PER MIL-A-8625F
TYPE III, CLASS 1, 0.0020 0.0005 THICK (0.0010 BUILDUP).
DICHROMATE SEAL. CONTACT AT INDICATED
FEATURES ONLY. ANODIZE ALL THREADS UNLESS NOTED.
ALL DIMENSIONS APPLY AFTER ANODIZING.
3 USE FEATURES INDICATED ONLY TO RACK PART FOR HARD ANODIZING.
DEFECTS IN ANODIZING WHICH EXPOSE BASE METAL ARE PERMISSIBLE ONLY
AT THESE RACK POINTS.
4 ENGRAVE FABRICATION DATE AS "MM/YY" AND CENTRAL 4-DIGITS OF DRAWING NUMBER PLUS
REVISION LETTER AS SHOWN IN 0.20 - 0.30 HIGH LETTERS.
5. MATERIAL: 7075-T6 ALUMINUM PLATE. MATERIAL CERTIFICATIONS
SHALL BE KEPT ON RECORD BY CONTRACTOR AND AVAILABLE FOR
REVIEW BY NAVO.
6. MATERIAL SHALL NOT BE PLASMA CUT. WATER OR SAW CUT
ARE PERMISSABLE.
REVISIONS
ZONE REV. DESCRIPTION DATE APPROVED
C4 C
REDRAWN WITH NEW DRAWING NUMBER. O-RING
DETAILS AS EA-BM-0112-13 REV C. CHANGED CBORE
TOLERANCE TO 0.251/0.253
2/19/2014 JCM
D MOVED 1/4-20 HOLES BACK TO ORIGINAL POSITION 6/24/2014 JCM
TITLE
SIZE DWG. NO. REV.
FULL SCALE SHEET 1 OF 1
U.S. NAVAL OCEANOGRAPHIC OFFICE
CODE N91 BLDG 9322
STENNIS SPACE CENTER, MS 39522
EA-ME-0912-14D
EARS G2 ENDCAP,
2-HOLE TRIAX
CAD GENERATED DRAWING
DO NOT SCALE OR
MANUALLY UPDATE
DRAWN
ENGR
CHECKED
DATEJCM 2/19/14
APPROVALS
INTERPRET DIM. AND TOL.
PER ASME Y14.5M-1994
DIMENSIONS IN INCHES
TOLERANCE ON DECIMALS
.XX .03
.XXX .010
FRACTIONS 1/16
TOLERANCE ON ANGLES
X .5 X.X .05
X.XX .005
MAX. SURF. FINISH 128
A
B B
A
C
D
C
D
3 2 1
ALL DIMENSIONS APPLY AFTER FINAL FINISH
5 3 2 1
D
A
A
NOTES:
1. BREAK AND DEBUR ALL SHARP EDGES
2. MACHINED SURFACE ROUGHNESS
3. INDICATED O-RING SURFACE SHOULD
HAVE A MAXIMUM ROUGHNESS OF
AND SHALL BE FREE OF
SCRATCHES, NICKS AND SIMILAR
DEFECTS.
4. FINISH: HARD ANODIZE AND SEAL PER
MIL-A-8625F, TYPE III, CLASS 1,
0.0020 0.0005 THICK (0.0010 BUILDUP).
DICHROMATE SEAL. ALL DIMENSIONS
APPLY AFTER ANODIZING.
5. USE FEATURE INDICATED TO RACK
PART FOR HARD ANODIZING.
6. MATERIAL: 7075-T6 ALUMINUM .
7. MATERIAL CERTIFICATIONS SHALL BE
KEPT ON RECORD BY CONTRACTOR AND
AVAILABLE FOR REVIEW BY NAVO.
1.48
1.75
R0.015
135.00° 0.75
1-14UNS-2A
1.50 1.25
R0.13
R0.063
0.750 1.180
0.20
0.30
B
SECTION A-A
5.
3.
2X 0.010 0.005
2X 0.0250 0.0100
0.182
0.107 0.101
R0.015
2X 5° 0°
DETAIL B
SCALE 4 / 1
0.900
TITLE
SIZE DWG. NO. REV.
SCALE SHEET
U.S. NAVAL OCEANOGRAPHIC OFFICE
CODE N91 BLDG 9313
STENNIS SPACE CENTER, MS 39522
EA-BM-0160-03B
EARS G2 PURGE PORT CAP
CAD GENERATED DRAWING
DO NOT SCALE OR
MANUALLY UPDATE
DRAWN
ENGR
CHECKED
DATERLC 08/03/11
APPROVALS
INTERPRET DIM. AND TOL.
PER ASME Y14.5M-1994
DIMENSIONS IN INCHES
TOLERANCE ON DECIMALS
.XX .030
.XXX .010
FRACTIONS 1/16
TOLERANCE ON ANGLES
X .5 X.X .05
X.XX .005
MAX. SURF. FINISH 128
2 1
A
B B
A
ALL DIMENSIONS APPLY AFTER FINAL FINISH
1 OF 1NA
RLC 08/03/11
C
| EA-ME-0576-10 Y-AXIS MID PLATE |
| Sheet1 |
| Drawing View1 |
| Section View A-A |
| Drawing View3 |
| Drawing View4 |
| Drawing View5 |
| EA-ME-0577-10- SHAFT BEARING CAP |
| Sheet1 |
| Drawing View1 |
| Section View A-A |
| EA-ME-0578-10 Rev B THREADED FLANGED SHAFT |
| Sheet1 |
| Drawing View1 |
| Section View A-A |
| EA-ME-0579-10 Y-AXIS WEIGHT |
| Sheet1 |
| Drawing View1 |
| Drawing View3 |
| EA-ME-0634-10 Z-AXIS WEIGHT |
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| EA-ME-0911-14 REV C EARS Triax Blank End Cap |
| Sheet1 |
| Drawing View1 |
| Drawing View3 |
| Section View Z-Z |
| Detail View Y (4 : 1) |
| Detail View W (2 : 1) |
| Detail View X (2 : 1) |
| EA-ME-0912-14 REV D EARS Triax 2-Hole End Cap |
| Sheet1 |
| Drawing View1 |
| Drawing View3 |
| Section View Z-Z |
| Detail View Y (4 : 1) |
| Detail View W (2 : 1) |
| Detail View X (2 : 1) |
| EARS G2 PURGE PORT CAP |
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Section View A-A |
| Detail View B (4 : 1) |
File details come from the government source that posted it. Updated .