ACB-1_SSSD-013-15-_ADDENDUM_2.pdf

SHIP: PHIBCB ONE SSP #: SSSD-013-15

INDEX

ADDENDUM NO 2

110-00-003

TITLEITEM NO

Hull Damage; repair

631-13-001

TITLEITEM NO

Interior Compartment; preserve

DATED:

SHIP: PHIBCB ONE (RMC 55104) ITEM NO: 110-00-003

COAR: 26 PCN: CF02-0128

CF02-0129

CMP: NONE

PLANNER: BURLESON, JERRY

SSP: SSSD-013-15 1 of 2 ITEM NO: 110-00-003

ADDENDUM NO. 2

EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR). This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties.

1. SCOPE:

1.1 Title: Hull Damage; repair

1.2 Location of Work:

1.2.1 80IM0303, Port and Starboard Side Shell.

1.2.2 80IM0303, Female Shear Connector, Port.

1.3 Identification:

1.3.1 Approximatly 70 Sq Foot Side Shell, Hull Plating A-36

1.3.1.1 Approximately 20 Linear Feet of Stiffeners.

1.3.2 Quantity; (One each) Port Female Shear Connector.

2. REFERENCES:

2.1 Standard Items

2.2 1600261, Rev P, Improved Navy Lighterage System Inboard & Outboard Profiles

2.3 1600314, Rev E, Improved Navy Lighterage System Scantlings, Deck, Shell Profile, Midship Section, (Powered Modules)

2.4 1600138-1, Rev D, Flexor Connector System Optional Shelf Angles

2.5 1600138-2, Rev D, Flexor Connector System Optional Shelf Angles

2.6 1600131, Rev C, Flexible Connector System Female Shear Connector

2.7 1600131-2, Rev C, Flexible Connector System Female Shear Connector

2.8 1600471, Rev F, INLS Paint Schedule & Deck Covering

3. REQUIREMENTS:

3.1 Gas Free spaces safe for personnel and hot work. Remove

interferrances in way of repair.

3.2 Cut out multiple areas on craft listed in 1.2.1 and identified in

1.3.1 and 1.3.1.1. Grind area smooth in way of removal. Areas identified by the SUPERVISOR comprise approximately 70 square feet of damaged side shell and approximately 20 linear feet of stiffeners. Procure material and install approximately 70 square feet of A36 steel plate and 20 linear feet of stiffeners at identified locations using 2.2 and 2.3 for guidance and material requirements.

3.2.1 Cut out damaged areas on craft listed in 1.2.2 and identified in 1.3.2. Grind area smooth in way of removal. Procure material, fabricate, and install new port aft female sheer connector using 2.2 through 2.7 for guidance and material requirements.

(I)(G) "NDT INSPECTION"

SHIP: PHIBCB ONE (RMC 55104)

SSP: SSSD-013-15 2 of 2 ITEM NO: 110-00-003

EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR). This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties.

3.2.1.1 Accomplish the requirements of 009-12 of 2.1 including Table 4, Column A, Lines One through 7 and 11 for repairs listed in 3.2 and 3.2.1.

3.2.1.2 Submit one legible copy, in approved transferrable

media, of a report listing results of the requirements of 3.2 to the SUPERVISOR.

3.3 Accomplish the requirements of 009-32 of 2.1 for new and disturbed surfaces.

4. NOTES:

4.1 None

5. GOVERNMENT FURNISHED MATERIAL (GFM):

5.1 LLTM:

1. None.

5.2 PUSH MATERIAL:

1. None.

5.3 KITTED MATERIAL:

1. None.

SHIP: PHIBCB ONE (RMC 55104) ITEM NO: 631-13-001

COAR: 26 PCN: CF02-0130

CSWT FILE NO: 631-001 CMP: NONE

REVISED: 15 Feb 2015 PLANNER: BURLESON, JERRY

SSP: SSSD-013-15 1 of 1 ITEM NO: 631-13-001

EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR). This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties.

1. SCOPE:

1.1 Title: Interior Compartment; preserve

1.2 Location of Work:

1.2.1 After Void

1.3 Identification:

1.3.1 Aft Void

2. REFERENCES:

2.1 Standard Items

2.2 1600471, Rev G, INLS Paint Schedule

3. REQUIREMENTS:

3.1 Gas free spaces safe for personnel and hot work.

3.1.1 No smoking, welding, burning or other source of ignition such as hot metal surfaces shall be allowed in the spaces while preservation is in progress.

3.1.2 Provide adequate lighting and ventilation during work

specified herein, using non-sparking blowers, explosion-proof lights and electrical connections. Paint will not dry correctly if fumes are allowed to accumulate above the paint.

3.2 Accomplish the requirements of 009-32 of 2.1, including Table 4, Line 20, Colum A, B, and C for all painted surfaces located in 1.2.1.

3.2.1 The final coat for disturbed surfaces shall match existing colors. Establish as original, paint markings on piping systems and equipment disturbed during cleaning and preservation operations.

3.3 Accomplish the requirements of 009-32 of 2.1 for new and disturbed surfaces.

4. NOTES:

4.1 Work in this item interfaces with Work Item 110-00-003.

5. GOVERNMENT FURNISHED MATERIAL (GFM):

5.1 LLTM:

1. None.

5.2 PUSH MATERIAL:

1. None.

5.3 KITTED MATERIAL:

1. None.