A.17.0_Quality_Assurance_Surveillance_Plan_QASP_DRAFT.pdf

Quality Assurance Surveillance Plan (QASP) Project: Electromagnetic Interference and Compliance Testing on S-System Printer

Requirement PWS Performance Standard Allowable Deviation

Surveillance Method

Correction Procedures

PRS # 1.

The contractor shall provide/develop a test report after accomplishing the identified EMI/EMC testing (Deliverable 4.1) which includes the information identified in Deliverable 4.1.1 thru 4.1.11.

Page 6, Technical Exhibit 2 – Deliverables Schedule

The Contractor will provide all required documentation (Deliverable 4.1) following the delivery instructions, and include all required submittals with each delivery.

100% compliance; however, the government will determine on a case-by-case basis as to the acceptability of the non-conformance.

The contractor shall comply with the deliverable requirements and communicate to the government if any of the requested documentation cannot be provided.

Contracting Officer Representative and Customer will coordinate deliveries and provide for inspection and acceptance at point of delivery based on Deliverable 4.1.

Any part of the deliveries that reveals non-conformance with the PWS must be communicated to the COR at time of delivery.

Contractor must receive notification from the COR of acceptability of each document and provide feedback within two kweeks of receipt of each deliverable.

Government will seek an adequate consideration for acceptance of nonconforming services.