RFC__9_Response.pdf

REQUEST FOR CLARIFICATION

N4523A18R0002

Attachment J-3

DATE OF REQUEST: 11-13-17 QUESTION NO: 9

REQUIREMENT: YC-800 and 804

REQUISITION NO.: N4523A18R0002

ITEM NO: 3.4

TITLE: Tanks and voids

PSNS&IMF CONTRACTS POC & PHONE:

See POCs listed on RFP.

PARA. NO: 3.4.5 PAGE NO: CONTRACTOR:

PLANNER’S NAME: ATTACH. NO: CONTRACTOR POC & PHONE:

CONTRACTOR QUESTION: (ONE QUESTION PER PAGE)

In the specs for the YC 800 PARA 3.4.5 it tell the contractor to remove existing and install new coating system to the interior surfaces as listed in table 2 including all structural members. The question is are we to remove the coatings on all the structural members in void 1 thru 4 plus the square feet listed in table 2 or are we to just do the square feet listed in table 2 only?

DO NOT WRITE BELOW THIS LINE

SPEC CHG: No DWG/REF CHG: No RQMTS CHG: No MAT'L CHG: No

TECHNICAL REVIEW: SERIAL NO:

Seek further clarification for voids 1 through 4 in sub-paragraph 3.4.5.1.

ALL RFCs MUST BE RECEIVED NO LATER THAN 2:00 P.M. (PST), 6 November 2017.