Attachment 2 - B1246 Modular Collaboration Space Modular Building Drawings.pdf

MANUFACTURER INFORMATION THIRD PARTY INSPECTION AGENCY INFORMATION

NAME: WHITLEY EAST LLC NAME: TR ARNOLD ASSOCIATES

ADDRESS: 64 HESS RD

LEOLA, PA 17540

BUILDING INFORMATION

PROJECT NAME: NAVAL UNDERSEA WARFARE CENTER BUILD 1246 COLLABORATION SPACE

MODEL DESIGNATION: 7837

SITE ADDRESS: 47 CHANDLER STREET, NEWPORT, RI 02841-1716

OCCUPANCY TYPE: B (BUSINESS)

CONSTRUCTION TYPE: V-B (STEEL FRAMED WALLS w/ WOOD SHEAR PANELS - UNPROTECTED)

BUILDING AREA: 1042 FT2

ENCLOSED SPACE: 7292 FT3

BUILDING HEIGHT ABOVE GRADE: 14' - 1"

OCCUPANT LOAD: 11, OR LESS

SPECIAL SYSTEMS: N/A

FIRE ALARM: SYSTEM SUPPLIED

AND INSTALLED ON SITE BY CERTIFIED INSTALLER

FIRE SUPPRESSION: NONE

BUILDING DESIGN LOADS

FLOOR LIVE LOAD UNIFORM 100 PSF

FLOOR LIVE LOAD CONCENTRATED 2000 LBS

FLOOR IMPACT LOAD N/A LBS

FLOOR DEAD LOAD 11.02 PSF

ROOF LIVE LOAD (SNOW) 30 PSF

GROUND SNOW LOAD 30 PSF

ROOF DEAD LOAD 8.58 PSF

FLAT ROOF SNOW LOAD 23.1 PSF

SNOW EXPOSURE FACTOR 1.00

SNOW LOAD IMPORTANCE FACTOR 1.00

THERMAL FACTOR 1.0

RAIN ON SNOW SURCHARGE LOAD N/A

BASIC WIND SPEED (VULT) 130 MPH

BASIC WIND SPEED (VASD) 100.69 MPH

RISK CATEGORY II

WIND EXPOSURE D

DESIGN WIND PRESSURE (HORIZONTAL) 28.76 PSF

DESIGN WIND PRESSURE (UPLIFT) 25.92 PSF

SEISMIC IMPORTANCE FACTOR 1.00

SEISMIC DESIGN CATEGORY B

SPECTRAL RESPONSE COEFFICIENT SDS 0.202

SPECTRAL RESPONSE COEFFICIENT SD1 0.083

SITE CLASS D

BASIC SEISMIC-FORCE-RESISTING SYSTEM A.16

DESIGN BASE SHEAR 1223.32 LBS

BUILDING DESIGN CODES

BU 2021 RISBC-1 (2018 INTERNATIONAL BUILDING CODE w/ RI STATE AMENDMENTS)

ME 2021 RISBC-4 (2018 INTERNATIONAL MECHANICAL CODE w/ RI STATE AMENDMENTS)

PL 2021 RISBC-3 (2018 INTERNATIONAL PLUMBING CODE w/ RI STATE AMENDMENTS)

EL 2021 RISBC-5 (2020 NFPA-70 NATIONAL ELECTRICAL CODE w/ RI STATE AMENDMENTS)

EN 2021 RISBC-8 (2018 INTERNATIONAL ENERGY CONSERVATION CODE w/ RI STATE AMENDMENTS)

FR 2018 NFPA-1 FIRE CODE w/ RI STATE AMENDMENTS

FG 2021 RISBC-19 (2018 INTERNATIONAL FUEL GAS CODE w/ RI STATE AMENDMENTS)

AC 2021 RISBC-1 (2018 INTERNATIONAL BUILDING CODE w/ RI STATE AMENDMENTS)

LS 2018 NFPA-101 LIFE SAFETY CODE w/ RI STATE AMENDMENTS

GENERAL SPECIFICATION NOTES:

1.) BUILDING NOT TO BE LOCATED IN A DESIGNATED FIRE ZONE.

2.) THIS BUILDING SHALL BE LOCATED MORE THAN 10 FEET AWAY FROM ANY

PROPERTY LINE OR ANY INTERIOR LOT LINE BETWEEN IT AND ANY OTHER

BUILDING.

3.) THIS BUILDING NOT TO BE LOCATED IN A FLOOD PRONE AREA.

4.) WHITLEY MFG. CO., INC. IS NOT RESPONSIBLE FOR THE LOCAL

BUILDING CODE REQUIREMENTS OVER AND ABOVE THE ENCLOSED

SPECIFICATIONS. THE SPECIFICATIONS ARE BASED ON THE DESIGN

PARAMETERS OF THE CODES LISTED ABOVE.

5.) DRINKING FOUNTAINS AND SERVICE SINKS SHALL BE PROVIDED

AND INSTALLED BY CERTIFIED INSTALLER.

6.) ADDITIONAL RESTROOM AND HANDICAPPED RESTROOM FACILITIES (IF REQUIRED

DUE TO BULDING OCCUPANT LOAD) SHALL BE READILY ACCESSIBLE AND THE PATH

OF TRAVEL SHALL NOT BE MORE THAN A TRAVEL DISTANCE OF 500'.

LOCAL BUILDING OFFICIAL TO VERIFY EXISTING FACILITIES.

7.) DUPLICATES OF THIS BUILDING CAN BE BUILT AS A MIRROR IMAGE.

8.) DUPLICATES OF THIS BUILDING CAN BE BUILT AS A SHELL.

9.) SITE BUILDER/CERTIFIED INSTALLER SHALL BE RESPONSIBLE FOR ON SITE BARRIER

FREE PROVISIONS INCLUDING: ALL ADA REQUIRED STEPS, RAMPS

HANDRAILS, PARKING, AND APPLICABLE SIGNAGE (INTERIOR AND

EXTERIOR) FOR THE VISUALLY IMPARED AND NON-AMBULATORY.

A101

SIM

A101

SIM

0 0

0 0

1t

Room name

150 SF

1 View Name 1/8" = 1'-0"

VIEW NUMBER,

NAME AND SCALE

ELEVATION SYMBOL

SECTION SYMBOL

WINDOW TAG

ROOM NAME,

NUMBER AND AREA

WELD SYMBOL

GENERAL SYMBOL LEGEND

REVISION TAG 1

DOOR TAG 101

BATT INSULATION

CONCRETE

STEEL

WOOD

RIGID INSULATION

PLYWOOD / OSB

GYPSUM

1st- floor12 1st- w alls- columns24 1st- flel- drs10 1st- flel9 1st-flme- p11 1st- walls23 common27 1st-common1 1st- floor- dim130 0

Drawn By: Serial No.

Page No.

Scale:

THIS DRAWING AND ALL INFORMATION

CONTAINED HEREON IS THE

PROPERTY OF WHITLEY MFG. CO. INC.,

AND IS NOT TO BE REPRODUCED

WITHOUT THE EXPRESS PERMISSION

OF WHITLEY MFG. CO., INC.

WHITLEY MFG. CO. INC., ASSUMES NO

RESPONSIBILITY FOR UNAUTHORIZED

USE OF THIS DRAWING.

Quote No.

Model No.

Job No.

Date:

Rev:

Checked By:

No. Description Date Whitley East, LLC

64 HESS ROAD

LEOLA, PA 17540

PHONE: 717.656.2081

www.whitleyman.com

C U

ST

O

M

ER

A

PP

R O

VA

L

SE

T

SPACE RESERVED FOR P.E. SEAL ONLYSPACE RESERVED FOR THIRD

PARTY INSPECTION SEAL ONLY

SPACE RESERVED FOR STATE

INSIGNIA OF APPROVAL

6/

/2

7:

:3

AM

As indicated

6/30/2022

7:00:30 AM

A0.02022-072-WP

EP 2696-97

49675-99

DL/CZ

(2) 10'-0" x 52'-0" MODULES

COVER SHEET

SUSTAINABLE MODULAR MANAGEMENT

NAVAL UNDERSEA WARFARE CENTER

SITE ADDRESS:

47 CHANDLER STREET

NEWPORT, RI 02841-1716

SUSTAINABLE MODULAR MANAGEMENT

NAVAL UNDERSEA WARFARE CENTER

INDEX (12 TOTAL):

A0.0 COVER SHEET

A0.1 SPECIFICATIONS

A1.0 EXTERIOR ELEVATIONS

A2.1 ARCHITECUTRAL PLANS AND ELEVATIONS

A7.1 ROOFTOP PLAN

E1.0 ELECTRICAL NOTES AND DETAILS

E2.1 ELECTRICAL PLAN

M2.1 MECHANICAL PLAN

P2.1 PLUMBING SCHEMATICS

S0.1 SUGGESTED BLOCKING PLAN

S1.1 FRAME PLAN

S5.1 BUILDING SECTIONS

SPACE RESERVED FOR P.E. SEAL ONLYSPACE RESERVED FOR THIRD

PARTY INSPECTION SEAL ONLY

SPACE RESERVED FOR STATE SEAL ONLY

Module Shipping Information

Module Serial Number Module Number Module Size

Module Shipping Height

Module Shipping Weight

Allowable Ship Loose Weight / Ballast

Axle Quantity Tire Size Coupler Type Coupler Size Coupler MFR.

Coupler Height Above Grade

2696 1 12'-4" x 56'-4" 13' - 6" 21,100 lbs 2,200 lbs 4 8:00 x 14.5 14 PLY BALL 0' - 2 5/16" VENTURE 1' - 4 3/4"

2697 2 12'-4" x 57'-0" 13' - 6" 23,100 lbs 2,000 lbs 4 8:00 x 14.5 14 PLY BALL 0' - 2 5/16" VENTURE 1' - 4 3/4"

GENERAL CONTRACTOR NOTES:

1. DIMENSIONS LISTED HEREIN TO BE HELD TO STANDARD CONSTRUCTION TOLERANCES

AT THE DISCRETION OF THE WHITLEY MANUFACTURING UNLESS OTHERWISE NOTED.

2. TERMINOLOGY USED WITHIN THE MODULAR BUILDING INDUSTRY OR

WHITELY MANUFACTURING MAY DIFFER FROM THE COMMON CONSTRUCTION

NOMENCLATURE IN THE CONSTRUCTION INDUSTRY. WHITLEY MANUFACTURING

RESERVES THE RIGHT TO US USE AND INTERPRET LANGUAGE AS IT DEEMS NECESSARY

TO CONVEY ITS METHODS OF MODULAR CONSTRUCTION.

3. ADDITIONAL SITE INSTALLED EQUIPMENT, MATERIALS OR OTHER ATTACHMENTS

(SUPPLIED AND INSTALLED BY OTHERS) OUTSIDE OF APPROVED DRAWINGS AND SUPPLY FROM,

OR BY WHITLEY MANUFACTURING, IS SUBJECT TO COMPLIANCE WITH LOCAL

BUILDING CODES AND THE LOCAL AUTHORITY HAVING JURISDICTION

AND IT IS THE SOLE RESPONSIBILITY OF THOSE MAKING THOSE ADDITIONS

OR CHANGES TO REVIEW, ENGINEER AND/OR SUBMIT THESE ADDITIONS

OR CHANGES TO THE LOCAL AUTHORITY HAVING JURISDICTION.

4. WHITLEY MANUFACTURING IS NOT RESPONSIBLE FOR ADDITIONAL LOADS

IMPOSED ON ITS BUILDINGS BY ADDITIONAL SITE INSTALLED EQUIPMENT

OR MATERIALS NOT DESIGNED OR CALCULATED FOR AT TIME OF BID.

ANY ADDITIONAL LOADING MUST BE REVIEWED AND APPROVED BY A

LICENSED PROFESSIONAL ENGINEER AND/OR IS SUBJECT TO REVIEW AND

APPROVAL BY THE LOCAL AUTHORITY HAVING JURISDICTION.

5. ALL WORK PERFORMED UNDER THIS PROJECT SHALL ONLY INCLUDE ITEMS,

INCLUDING PART NUMBERS, SPECIFICALLY DEFINED AND LISTED IN WHITLEY’S

BID DOCUMENTS. ANY WORK PERFORMED, OR MATERIAL SUPPLIED, IN CONJUNCTION

WITH THIS PROJECT SHALL BE GOVERNED BY THE TERMS AND CONDITIONS ATTACHED HERETO.

6. ANY DRAWING, PURCHASING, CUSTOMER CHANGE OR CHANGE-IN-CONSTRUCTION

NOT AFFECTING CODE APPROVAL MAY BE CHANGED

AT THE DISCRETION OF WHITLEY MANUFACTURING,

SO LONG AS DRAWINGS REFLECT THE APPROPRIATE REVISION MARKS TO INDICATE

WHERE THE REVISION HAS TAKEN PLACE ON THE DRAWING AND IS DATED ELECTRONICALLY

IN THE MANUFACTURERS ELECTRONIC FILE FOR THE PROJECT.

7. THE WHITLEY EAST LIMITED WARRANTY IS FOR 12 MONTHS FROM THE ORIGINAL

DATE OF MANUFACTURER’S INVOICE ONLY AND ITS TERMS AND CONDITIONS ARE

HEREBY MADE PART OF THIS DRAWING SET. A COPY OF THE LIMITED WARRANTY IS

INCLUDED WITHIN EACH MODULE SHIPPED FROM THE FACTORY. A COPY MAY BE

OBTAINED BY EMAIL FROM THE FACTORY BY CALLING: 717.656.2081. PLEASE READ

THE LIMITED WARRANTY AS TERMS AND CONDITIONS APPLY FOR TRANSPORT.

8. WHITLEY EAST SHALL NOT BE OBLIGATED TO PERFORM ANY WORK NOT SPECIFICALLY LISTED.

9. WHITLEY RESERVES THE RIGHT TO SUBSTITUTE AND/OR CHANGE NON-SPECIFIC

MATERIALS WITHOUT NOTICE. ANY MATERIALS SPECIFIED BY THE END-USER

WILL ONLY BE CHANGED THROUGH CHANGE-ORDER REQUEST.

10. TRANSPORTATION ARRANGEMENTS ARE TO BE MADE BY THE PURCHASER

ACCORDING TO THE TERMS AND CONDITIONS OUTLINED IN THE WHITLEY EAST LIMITED WARRANTY, UNLESS OTHERWISE SPECIFIED IN THE BID DOCUMENTS.

11. SET-UP OF THE BUILDING OR BUILDING UNITS SHALL BE CONDUCTED BY QUALIFIED

AND/OR STATE APPROVED MODULAR BUILDING CONTRACTOR FAMILIAR WITH THE SET-UP,

INSTALLATION AND FINISH REQUIREMENTS FOR MODULAR STRUCTURES, SUCH AS

(NOT ALL INCLUSIVE) PROPER BLOCKING AND LEVELING, FINAL DOOR ADJUSTMENTS,

MEP SERVICE CONNECTIONS, AND MATE-LINE WEATHER-PROOFING.

12. A COPY OF THE APPROVED CONSTRUCTION DRAWINGS IS SHIPPED WITH

EACH PROJECT FOR USE BY THE SITE CONSTRUCTION CREW TO STAY IN

COMPLIANCE WITH THE STAMPED AND APPROVED BUILDING DRAWINGS AND CODES,

FIRE SEPARATION DISTANCES, CUSTOMER SPECIFICATIONS, AND THE LIMITED WARRANTY.

ADDITIONAL DRAWING SETS MAY BE OBTAINED FROM THE FACTORY, IF NEEDED.

WHITLEY EAST LLC IS NOT RESPONSIBLE FOR ASSUMPTIONS MADE BY OTHERS AT TIME OF QUOTE;

COORDINATION OF SITE SCOPES WITH THE FACTORY ARE RECOMMENDED BEFORE TIME OF QUOTE.

13. ANY FIRE SEPARATION OR PROTECTION (FIRE WALLS) BASED ON

PROPERTY LINES OR EXISTING BUILDINGS, AS REQUIRED BY STATE BUILDING CODES, IS NOT INCLUDED.

PROTECTED OPENINGS, IF REQUIRED, ALSO HAVE NOT BEEN QUOTED

UNLESS NOTED AS SUCH WITHIN THE ABOVE SPECIFICATIONS.

14. LOCAL CODES, FEDERAL REGULATIONS OR OTHER IMPLIED ORDINANCES ARE

NOT QUOTED BY WHITLEY EAST UNLESS FORWARDED AND OTHERWISE SPECIFIED

IN THE BID DOCUMENTS OR SHOWN IN THE DRAWING DOCUMENTS.

15. GAS LINES ARE REQUIRED TO BE INSTALLED AND TESTED BY A LOCAL,

CERTIFIED LICENSED PLUMBER AT SITE

16. DETAILS PERTAINING TO SITE SET AND CLOSE UP INCLUDED IN THIS SET MUST BE ADHERED TO.

FAILURE TO COMPLY WITH DETAILS LISTED HEREIN WITHOUT CONSULTATION OF WHITLEY

MANUFACTURING WILL ABSOLVE WHITLEY EAST FROM ANY LIABILITY.

ABBREVIATIONS

Abbv. Word

+#" UP #" A.F.F.

A AMP

A.F.F. ABOVE FINISHED FLOOR

ACT ACOUSTICAL TILE

BD BOARD

CAB CABINET

CLG CEILING

COL COLUMN

CONC CONCRETE

CPT CARPET

CU. FT. CUBIC FOOT

DCW DOMESTIC COLD WATER

DHW DOMESTIC HOT WATER

DHWR DOMESTIC HOT WATER RETURN

DTHW DOMESTIC TEMPERED HOT WATER

DTL DETAIL

DWG DRAWING

EER ENERGY EFFICIENCY RATIO

EOS EDGE OF STUD

EQ EQUAL

EXG EXISTING

EXT. EXTERIOR

FLR FLOOR

FRT FIRE TREATED

GC GENERAL CONTRACTOR

GFCI GROUND FAULT CIRCUIT INTERRUPTER

GLS GLASS

GWB GYPSUM WALLBOARD

GYP GYPSUM

HPP HIGH PRESSURE PNEUMATIC

HVAC HEATING, VENTILATION, AIR CONDITONING

HWD HARDWOOD

INT. INTERIOR

MAX MAXIMUM

MFR MANUFACTURER

MIN MINIMUM

MTD MOUNTED

N/A NOT APPLICABLE

NTS NOT TO SCALE

O.C. ON CENTER

PNL PANEL

PT PRESSURE TREATED

RM ROOM

SAN SANITARY

SHT SHEET

SIM SIMILAR

SQ. FT. SQUARE FOOT

STD STANDARD

STL STEEL

TEL TELEPHONE

TYP. TYPICAL

UNO UNLESS NOTED OTHERWISE

V VOLT

VT VENT

VTR VENT THROUGH ROOF

WD WOOD

WP WEATHERPROOF

Ø DIAMETER

HATCH LEGEND

WHITLEY EAST LLC

64 HESS RD

LEOLA, PA 17540

717-656-2081

APPROVED:

APPROVED AS NOTED:

RETURN FOR CORRECTION:

BY:

DATE:

UPON APPROVAL, THESE DRAWINGS WILL TAKE

PRECEDENCE OVER ALL PREVIOUS DRAWINGS

FOR THIS PROJECT

MODULE SIZES INCLUDE HITCH AND OVERHANGS.

SIZES SUBJECT TO GROWTH DURING CONSTRUCTION;

DIMENSIONS TO BE FIELD VERIFIED BEFORE UNIT

SHIPS AND DEALER TO BE NOTIFIED WITH

FINAL FIELD VERIFIED DIMENSIONS

No. Description Date 1 Revisions per customer comments 06.29.2022

EXTERIOR DOOR WITH

VISION LITE

INTERIOR DOOR

2" 2"

2" 2"

M A

X

3' - 0"

3' - 4"

3' - 0"

3' - 4"

5"

1st- floor12 1st- w alls- columns24 1st- flel- drs10 1st- flel9 1st-flme- p11 1st- walls23 common27 1st-common1 1st- floor- dim130 0

Drawn By: Serial No.

Page No.

Scale:

THIS DRAWING AND ALL INFORMATION

CONTAINED HEREON IS THE

PROPERTY OF WHITLEY MFG. CO. INC.,

AND IS NOT TO BE REPRODUCED

WITHOUT THE EXPRESS PERMISSION

OF WHITLEY MFG. CO., INC.

WHITLEY MFG. CO. INC., ASSUMES NO

RESPONSIBILITY FOR UNAUTHORIZED

USE OF THIS DRAWING.

Quote No.

Model No.

Job No.

Date:

Rev:

Checked By:

No. Description Date Whitley East, LLC

64 HESS ROAD

LEOLA, PA 17540

PHONE: 717.656.2081

www.whitleyman.com

C U

ST

O

M

ER

A

PP

R O

VA

L

SE

T

6/

/2

7:

:3

AM

3/4" = 1'-0"

6/30/2022

7:00:31 AM

A0.12022-072-WP

EP 2696-97

49675-99

DL/CZ

(2) 10'-0" x 52'-0" MODULES

SPECIFICATIONS

SUSTAINABLE MODULAR MANAGEMENT

NAVAL UNDERSEA WARFARE CENTER

DEALER NAME: Sustainable Modular Management PROJECT NAME: Naval Undersea Warfare Center

SERIAL NUMBER: 2696-97

MODEL NUMBER: 7837

JOB I.D. # 2022-072-WP

MODEL SIZE: 20'X52' (2) 10'-0"x52'-0" MODULES

A-FRAME

NOTE: FRAME(S) TO BE MIG WELDED, INCLUDING SPRING HANGER

ATTACHMENT AND HITCH CONSTRUCTION

1 TYPE: PERIMETER

2 MAIN BEAM: W10 X 12# BEAM (A992 GRADE MINIMUM)

3 X-MEMBER: W8"x10# AT 48" O.C.

4 X-MEMBER: W10"x12# AT AXLE-MOUNTING AREAS

5 HITCH: BOLT-ON BALL COUPLER

6 AXLES: FOUR (BOGIE) -- w/ TIRES OUTBOARD OF MAIN RAIL

NOTE: WHEEL WELL BOXES INSTALLED FOR TRANSPORTATION

7 SPRINGS: MULTI-LEAF, UNDERSLUNG

w/ HANGERS, EQUALIZERS, AND AXLE ATTACHING PARTS

8 TIRES: 8:00 X 14.5, 14 PLY

9 TIE DOWN: OVER THE FRAME

NOTE: PROVIDED & INSTALLED BY CERTIFIED INSTALLER

SEE SUGGESTED BLOCKING PLAN FOR TIE DOWN LOCATIONS

10 MISC: PUNCH OR DRILL 1/2" DIA. HOLES AT 32" O.C. AT TOP FLANGE OF

PERIMETER OF FRAME FOR ATTACHING JOIST FRAMING TO CHASSIS FRAME

11 MISC: I BEAM CLAMPS SHIPPED LOOSE FOR INSTALL BY CERTIFIED INSTALLER

12 MISC: THIS UNIT WILL HAVE STEEL TUBE COLUMNS

13 MISC: THIS UNIT WILL HAVE STEEL DIAG. SHIPPING STRAPS

14 MISC: 3/4" PLYWOOD EXTERNAL WHEEL WELLS AT OUTBOARD SIDES OF FRAME

NOTE: EXTERNAL WHEEL WELLS TO BE REMOVED ON SITE WITH AXLES

15 UNDER COATING: RUST INHIBITIVE LATEX TYPE PAINT, BLACK: 100%

COVERAGE OF STRUCTURAL MEMBERS.

B-FLOOR

1 BOTTOM BOARD: FS-25, CLASS A, SHEPWEAVE II

NOTE: SHIP LOOSE BOTTOM BOARD & INSULATION FOR WHEEL-

WELL AREAS, TO BE INSTALLED BY CERTIFIED INSTALLER.

2 INSULATION: R-30c KRAFT FACED FIBERGLASS BATT 3 JOISTS: 2 x 8 (SPF #2) AT 16-IN O.C. NOMINAL

LONGITUDINAL JOISTS

w/ DBL SIDERAILS

(FRAME OUT WHEEL WELLS)

4 DECKING: 3/4" T&G UNDERLAYMENT PLYWOOD (RATED 48/24)

(HOLD BACK DECKING 11" AT MATELINE)

5 COVERING: 1/8" VINYL COMPOSITION TILE (12"x12" TILES)

(HOLD BACK COVERING AT SEAM LINE 17")

6 MISC: VINYL COVE BASE; 6"H IN RESTROOM AND 4"H IN REMAINING AREAS

C-EXTERIOR WALLS

NOTE: AT OPEN MATELINE AREAS TO BE COVERED W/VISQUEEN, INSTALL

PANELING STRIPS AT 2' O.C. VERTICALLY, FOR THE FIRST SIX-

FEET LENGTH OF OPEN AREA.

NOTE: DO NOT REMOVE TEMPORARY ROOF BRACING SUPPORTS AT MODULE

SIDES UNTIL MODULE IS SET ON PERMANENT FOUNDATION.

1 STUDS: 1 5/8" X 6" (18 GA.) STEEL 16" O.C.

W/DBL. STUDS EACH END OF SIDEWALLS

w/ 3" x 6" 18ga JAMBSTUDS AND HEADERS w/ 14ga CLIPS w/ LUMBER NAILERS INSTALLED AT THE INTERIOR OF WALL OPENINGS

2 BOTTOM PLATE: 1 1/4"D. x 6" (18 GA.) STEEL TRACK 3 TOP PLATE: 1 1/4"D. x 6" (18 GA.) STEEL TRACK

4 COVERING: 1/2" VINYL COV. GYP. BOARD (CLASS I F.S.)

NOTE: VINYL COVERED BATTENS AS REQUIRED

4a COVERING: 0.090" F.R.P. LAMINATED TO 1/2" UNIFINISHED GYP. BOARD w/ NUDO V-15 INSIDE CORNER TRIMS, AND NUDO V-25

VERTICAL BATTEN TRIMS

5 SHEATHING: 1/2" FRT CDX PLYWOOD (RATED 32/16)

6 SHEATHING: WEATHER-RESISTIVE BARRIER (TYVEK OR EQUAL)

7 SCREW BACKER: 16 GA. x 3" FLAT STEEL HORIZONTAL STRAP AT

3'-3 7/8" A.F.F. AND 7'-3 7/8" A.F.F. TO BOTTOM

8 INSULATION: R-19 F.S.K. FIBERGLASS BATT

9 INSULATION: 1 1/2" THICK EPS RIGID INSULATION BOARD (R-7.5)

OVER F.R.T. PLYWOOD SHEATHING

10 SIDING: 29 GA. STEEL PANEL w/ 3/4"D. VERT. RIB

NOTE: START SIDING 2 1/4" ABOVE TOP OF MAIN RAIL

NOTE: ALL DOORS/WINDOWS TO BE INSTALLED BEFORE SIDING

11 TRIM: 29 GA. STEEL

J-CHANNEL AT DOORS

NOTE: COLOR MATCHING U-CHANNEL INSIDE J-CHANNEL WHEN HIGH RIB IS NOT IN J-CHANNEL

BOTTOM TRIM

TOP TRIM

OUTSIDE CORNER TRIM

12 SKIRTING: 29 GA. STEEL PANEL w/ 3/4"D. VERT. RIB

AVERAGE 36" HIGH (SHIP 3X9 SHEETS)

13 COLUMNS: HSS3x3x3/16 STEEL TUBE

D-INTERIOR WALLS

1 STUDS: 2 x 4 (SPF #2) AT 16" O.C.

W/DBL. STUDS EACH END OF WALLS (SPF #2)

SGL. JAMBSTUD AT DOORS (SPF #2);

SGL. JACKSTUD UNDER DOORS HEADERS (SPF #2);

W/ DBL. 2 x 4 HEADERS (SPF #2)

NOTE: INSTALL CONTINUOUS BLOCKING BETWEEN STUDS

UP 94 1/2" TO BOTTOM OF BLOCK AT FULL HEIGHT INTERIOR WALLS

2 BOTTOM PLATE: (1) 2 x 4 (SPF #2) 3 TOP PLATE: (2) 2 x 4 (SPF #2)

4 COVERING: 1/2" VINYL COV. GYP. BOARD (CLASS I F.S.)

NOTE: VINYL COVERED BATTENS AS REQUIRED

5 COVERING: 0.090" F.R.P. LAMINATED TO 1/2" UNIFINISHED GYP. BOARD

w/ NUDO V-15 INSIDE CORNER TRIMS, AND NUDO V-25

VERTICAL BATTEN TRIMS

6 INSULATION: R-11 UNFACED FIBERGLASS BATT

7 MISC: 2x4 PLENUM WALL (STUDS AT 16" O.C.)

LINED w/ MIN. 1/2" GYPSUM BOARD 8 MISC: 2x4 CHASE WALL (STUDS AT 16" O.C.)

9 MISC: 2x6 CHASE WALL (STUDS AT 16" O.C.)

10 COLUMNS: (3) 2 x 6 (#2 SPF) NON-DADO FOR ROOF BEAM

NOTE: BASE OF COLUMN TO REST ON FLOOR DECK

E-ROOF

1 RAFTERS: 2 x 10 (SPF #2) AT 16" O.C.

NOTE: RAFTERS TO BE DADOED

2 MATE BEAM: LVL, 2.0 E (3100Fb) x 1 1/2" THICK, 11 7/8"H, 2- PLY MAX SPAN: 17' - 3"

NOTE: DBL. 2x4 (SPF#2) LEDGER

NOTE: LUMBER TAPER OVER MATE BEAM

4 CEILING: SUSPENDED T-GRID w/ 2'x 4' U.S.G. LAY-IN TILE

FINISH CEILING HT: 7' - 10 1/2"

NOTE: CEILING TILE, GRID TEES, & WALL ANGLE FOR MATE LINE

SHIPPED LOOSE FOR INSTALLATION BY CERTIFIED INSTALLER.

5 TRUE CEILING: FS-25, CLASS A, SHEPWEAVE II, ATTACHED TO UNDERSIDE

OF RAFTERS TO SUPPORT INSULATION

6 INSULATION: R-38c KRAFT-FACED FIBERGLASS BATT 7 SHEATHING: 7/16" OSB w/ MULE-HIDE FR ADHESIVE OR 7/16" OSB CLASS "C" FR DECK 8 ROOFING: EPDM RUBBER 1-PC. MEMBRANE, 45 mil, BLACK

11 VENTS: AURA ROOF TOP VENTILATION SYSTEM

AV-14-C6-NF EXHAUST VENT (SHIPPED LOOSE)

PV-14-C6-NF INTAKE VENT (SHIPPED LOOSE)

SF-14-2 BASE FLANGE (INSTALLED IN FACTORY)

CAP-14 TEMPORARY ALUMINUM CAP

F-DOORS

SEE DOOR SCHEDULE ON A0.1

G-WINDOWS

SEE WINDOW SCHEDULE ON A0.1

H-ELECTRICAL

1 PANELBOARD: 208/120 V, 3-PH, 60Hz, 4-WIRE - UP 70" A.F.F. TO TOP OF BOX

NOTE: WITH COBBER BUS BAR

NOTE: WITH BOLT-IN BREAKERS

NOTE: PANELBOARDS TO BE 10kAIC

2 SERV ENT: 2" EMT FROM WEATHERPROOF 120/208V 3 PH. PIN AND SLEEVE RECEPTACLE

MELTRIC 31-94237-K16 OR EQUAL

w/ LL CONDUIT BODY AND WEATHERPROOF SURFACE-MOUNT BACK BOX

MELTRIC 715C3N20, OR EQUAL

UP 48" A.F.F. TO BOTTOM

3 WIRING: #12-2 w/GND MIN., TYPE NM-B 90oC COPPER; IN WALL FRAMING CAVITIES ONLY 4 WIRING: MC CABLE w/ INTERLOCKING TAPE SHEATH

(#12 MIN WIRE SIZE) - TYPE THHN IN CEILING CAVITY ONLY

5 CROSS-SEAM WIRING: PIGTAIL AND JUNCTION BOX

6 INT. LIGHTS: 24" x 48" L.E.D. (LAY-IN) w/ LENSE

4000K/4000 LUMEN MINIMUM

7 INT. LIGHTS: 24" x 48" L.E.D. (LAY-IN) w/ LENSE, AND BATTERY BACK-UP

4000K/4000 LUMEN MINIMUM

8 EXT. LIGHTS: 12W L.E.D. WALL PACK w/ PHOTOCELL CONTROLS AND BATTERY BACK-UP

(WEATHERPROOF) - UP 74" A.F.F. TO BOTTOM

9 EGRESS LIGHTS: EXIT/EMERGENCY LIGHT W/ BATTERY PACK

- UP 90" TO BOTTOM

10 RECEPTS: 125V/20A DUPLEX

UP 18" TO BOTTOM OF BOX UNLESS NOTED OTHERWISE

10a RECEPTS: 125V/20A QUADRUPLEX

UP 18" TO BOTTOM OF BOX UNLESS NOTED OTHERWISE

11 RECEPTS: 125V/20A DUPLEX (GFCI) - UP 18" A.F.F. TO BOTTOM UNLESS NOTED OTHERWISE

12 RECEPTS: 125V/20A DUPLEX (GFCI BREAKER PROTECTED) -

UP 18" A.F.F. TO BOTTOM UNLESS NOTED OTHERWISE FOR REFRIGERATOR

13 HEAT TAPE RECPT: 125V/20A DUPLEX GFEP BREAKER PROTECTED, INSTALLED BELOW FLOOR

14 RECEPTS: 125V/20A DUPLEX WEATHER-RESISTANT GFCI RECEPTACLE

INSTALLED w/ WEATHER-PROOF IN-USE COVER - UP 6" A.F.F. TO BOTTOM 14a RECEPTS: 120V/20A L5-20R "TWIST-LOCK" SINGLE - CEILING MOUNTED

NOTE: ALL RECEPTS ARE TO BE GROUNDING TYPE

15 SWITCHES: 120V/20A 3-WAY - UP 44" A.F.F. TO BOTTOM

16 SWITCHES: 120V OCCUPANCY/VACANCY SENSOR, WALL-MOUNTED -

UP 44" A.F.F. TO BOTTOM

17 SWITCHES: 120V OCCUPANCY/VACANCY SENSOR, CEILING-MOUNTED

18 DATA DROPS: 2x4 JUNCTION BOX, UP 18" TO BOTTOM, UNLESS NOTED OTHERWISE w/ 3/4" FLEXIBLE NON-METALLIC CONDUIT TO CEILING CAVITY 19 DATA PULL BOX: EXTERIOR 24"x24"x8"D NEMA 4X ENCLOSURE w/ 4" EMT CONDUIT AND LB

CONDUIT BODY TO INTERIOR CEILING CAVITY - UP 60" A.F.F. TO TOP OF BOX

20 FIRE ALARM: ROUGH-IN ONLY FOR PULL STATION -- 2x4 BOX

UP 44" A.F.F. TO BOTTOM, w/ 3/4" EMT TO A/V ROUGH-IN 21 FIRE ALARM: ROUGH-IN ONLY FOR AUDIO/VISUAL DEVICE -- 4x4 BOX

UP 80" A.F.F. TO BOTTOM, w/ 3/4" EMT TO CEILING CAVITY

22 FIRE ALARM: ROUGH-IN ONLY FOR SMOKE DETECTOR (CLG. MT'D.)

2-GANG BOX AT UNDERSIDE OF RAFTERS; TAGGED FOR USE

NOTE: FIRE ALARM SYSTEM TO BE PROVIDED AND INSTALLED

ON SITE BY CERTIFIED INSTALLER, NOT BY FACTORY.

NOTE: ALL CONDUIT ROUGH-INS TO HAVE PULL WIRES INSTALLED.

J-PLUMBING

1 WTR CLST: TANK TYPE (H/C ACCESSIBLE) W/ ELONGATED BOWL AND

OPEN FRONT SEAT

FLUSH CONTROL ON APPROACH ("WIDE") SIDE OF TOILET

2 LAVATORY: VITREOUS CHINA WALL HUNG w/ 4" CENTERSET H/C ACCESSIBLE FAUCET

NOTE: SINGLE-FIXTURE TEMPERING VALVE REQUIRED FOR ALL ACCESSIBLE

HAND WASHING FACILITIES; MAX. WATER TEMPERATURE 110oF

3 WTR HTR: 4 GALLON ELECTRIC (1440W/120V MINI TANK) EEMAX EMT4 OR EQUAL

NOTE: WATER HEATER INLET & OUTLET CONNECTIONS SHALL HAVE A

DIELECTRIC UNITON AND SHUT OFF VALVE

NOTE: BOTTOM FED WATER HEATERS SHALL HAVE A VACUUM RELIEF

VALVE

4 SUPPLY: PEX (CROSS-LINKED POLYETHYLENE)

NOTE: INSULATE HOT WATER & HOT WATER RETURN PIPING; INSULATE

COLD WATER PIPING IN CEILING CAVITY

NOTE: CROSS-SEAM SUPPLY LINES, FTGS., & INSTALLATION

OTHERS ON SITE.

5 DWV: SCHEDULE 40 PVC

NOTE: MULTIPLE DROPS STUBBED THRU FLOOR. INTER-

CONNECTING MANIFOLD BY CERTIFIED INSTALLER

NOTE: SHIPLOOSE PLUMBING VENT EXTENSIONS, FOR ON-SITE

INSTALLATION BY CERTIFIED INSTALLER.

6 MISC. 15"x15" STAINLESS STEEL SINK W/ GOOSENECK FAUCET

W/ H/C CONTROLS

7 MISC. GRAB BARS (SEE FLOOR PLAN AND RESTROOM ELEVATIONS)

SIDE BAR: 42"L BACK BAR: 36"L VERTICAL BAR: 18"L

8 MISC: 18"Wx36"H STAINLESS STEEL EDGED MIRROR

9 MISC: TOILET PAPER DISPENSER

K-H.V.A.C.

1 HEATING/ WALL-MOUNT, 2.5-TON COOLING, 9.0kW

COOLING: AIR CONDITIONER w/ ELEC. HEAT w/ BUILT-IN DISCONNECT & (0-25%) FRESH AIR DAMPER

NOTE: VALUE IN PARENTHESIS REPRESENTS PERCENTAGE OF OUTDOOR AIR

AVAILABLE, BASED UPON UNIT RATED AIRFLOW.

BARD W30AB-B09XWXXXX OR EQUAL

NOTE: OUTDOOR INTAKE AIR DAMPER TO BE IN CLOSED POSITION

FOR SHIPPING.

NOTE: INTAKE AIR DAMPER MUST BE ADJUSTED ON SITE FOR

PROPER AIRFLOW -- SEE HVAC UNIT OPERATING INSTRUCTIONS.

2 SUPPLY DUCT: SINGLE 1" FIBERGLASS DUCTBOARD IN CEILING CAVITY

NOTE: INSTALL H.V.A.C. UNITS W/ MFR'S. RECOMMENDED

CLEARANCE AT FIRST 3' OF SUPPLY DUCT

3 DIFFUSERS: 24" X 24" LAY-IN w/ADJ. DAMPER (CEILING) 4 DIFFUSERS: 12" X 12" w/ ADJ. DAMPER (CEILING) (4 WAY)

5 RETURN AIR: 28" X 14" AT PLENUM WALL (RG-3W OR EQUAL)

6 EXH FAN: 80 CFM (CEILING MOUNTED)

7 THERMOSTAT: FOR WALL-MOUNTED H.V.A.C. UNIT - UP 48" A.F.F.

PROGRAMMABLE,

AUTO CHANGEOVER HEAT & COOL

L-FURNITURE & INTERIOR FURNISHINGS

1 SINK BASE CABINET: 48"W DOUBLE DOOR

NOTE: ALL CABINETS ARE MERILLAT MAPLE w/ SENECA RIDGE STYLE DOORS w/ MATCHING FILLERS AS REQUIRED.

3 COUNTERTOP: 24" DEEP H.P. LAMINATED

NOTE: COUNTERTOP TO BE H.P. LAMINATE OVER DOUBLE

LAYER OF 5/8" SUBSTRATE w/ FINISHED EDGES AND

4"H BACK AND SIDE SPLASHES

M-MISCELLANEOUS

1 SHIP LOOSE: EXTERIOR & INTERIOR MATELINE CLOSE-UP MATERIAL

SHIPPED LOOSE FOR INSTALLATION BY CERTIFIED INSTALLER.

UNIT LABELS

THIRD PARTY LABEL

DATA PLATES AND LABELS LOCATED ABOVE SUSPENDED

CEILING ON THE "FRONT" WALL OF THE MODULE

MBI LABEL

RI/IIBC LABEL

DECAL TYPE

NONE

MODEL APPROVAL

THIRD PARTY AND REGISTERED ARCHITECT OR ENGINEER

STATE OF RI

Door Schedule Mark Description Count Width Height Rough Width Rough Height Frame Type Frame Throat Lite Fire Rating Hardware Set Comments

F1 18ga COMM. INSULATED STEEL DOOR 2 3' - 0" 7' - 0" 3' - 2" 7' - 1" 16ga STEEL K.D. 8 5/8" 5 x 20 N/A A F2 SOLID CORE WOOD 1 3' - 0" 6' - 8" 3' - 2" 6' - 9" 16ga STEEL K.D. 4 5/8" N/A N/A B

Door Hardware Schedule Hardware Set ID Description Comments

A LEVER LOCKSET w/ SFIC

CONSTRUCTION CORE

GRADE 2; STOREROOM FUNCTION

4.5"x4.5" NRP BB HINGES US32D FINISH

DOOR CLOSER GRADE 2

WEATHERSTRIPPING

DRIP CAP

THRESHOLD

DOOR SWEEP

Door Hardware Schedule Hardware Set ID Description Comments

B

LEVER LOCKSET GRADE 2; PRIVACY FUNCTION

4.5"x4.5" BB HINGES US26D FINISH

DOOR CLOSER GRADE 2

DOOR STOP FLOOR-MOUNTED

3/4" = 1'-0"1 Door Elevations

Room Finish Schedule Name Number Perimeter Area Floor Finish Base Finish Wall Finish Ceiling Finish

OPEN OFFICE 101 137' - 0" 852 SF 1/8" VCT (12"x12" TILES) 4"H VINYL

COVE BASE

1/2" VINYL COVERED

GYPSUM

2' x 4' SUSPENDED CEILING GRID w/ LAY-IN TILES

RESTROOM 102 34' - 6 3/4" 72 SF 1/8" VCT (12"x12" TILES) 6"H VINYL

COVE BASE

.090" PEBBLED

SURFACE FRP

2' x 4' SUSPENDED CEILING GRID w/ LAY-IN TILES

Material Color Chart Material Color Comments

1/8" VCT TO BE SELECTED FROM MFRS. STD. COLORS 12"x12" TILES VINYL COVE BASE TO BE SELECTED FROM MFRS. STD. COLORS 6"H IN RESTROOM AND 4"H IN REMAINDER OF ROOMS

1/2" VINYL COVERED GYPSUM TO BE SELECTED FROM MFRS. STD. COLORS w/ MATCHING BATTENS AS REQUIRED .090" F.R.P. LAMINATED TO 1/2" GYPSUM TO BE SELECTED FROM MFRS. STD. COLORS PEBBLED SURFACE; w/ MATCHING TRIMS

INTERIOR DOOR PANEL TO BE SELECTED FROM MFRS. STD. COLORS SOLID CORE PRIMED HARDBOARD INTERIOR DOOR FRAMES TO BE SELECTED FROM MFRS. STD. COLORS SHERWIN WILLIAMS DTM PAINT

29ga STEEL SIDING TO BE SELECTED FROM MFRS. STD. COLORS w/ 3/4"D RIBS 29ga STEEL TRIMS TO BE SELECTED FROM MFRS. STD. COLORS SEE TRIM PROFILES ON A1.0

29ga STEEL SKIRTING TO BE SELECTED FROM MFRS. STD. COLORS w/ 3/4"D RIBS EXTERIOR DOOR SLABS TO BE SELECTED FROM MFRS. STD. COLORS INSULATED STEEL DOOR; SHERWIN WILLIAMS DTM PAINT

EXTERIOR DOOR FRAMES TO BE SELECTED FROM MFRS. STD. COLORS SHERWIN WILLIAMS DTM PAINT

VINYL WINDOW FRAMES TO BE WHITE

INTERIOR WOOD WINDOW JAMB AND CASING TO BE WHITE 1x LUMBER JAMB AND SILL w/ 2 1/4" CLAM SHELL CASING

SUSPENDED CEILING GRID TO BE WHITE

ACOUSTIC CEILING TILE TO BE WHITE 2' x 4' LAY-IN

EPDM ROOF MEMBRANE TO BE BLACK

INTERIOR LIGHT FRAMES TO BE WHITE 2' x 4' LAY-IN

INTERIOR LIGHT LENSES TO BE FROSTED

EXTERIOR LIGHT HOUSING TO BE BRONZE WALL PACK

RECEPTACLES, SWITCHES, AND COVERPLATES TO BE WHITE

WALL-MOUNTED H.V.A.C. UNIT TO BE BEIGE BAKED ENAMEL FINISH

DIFFUSERS TO BE WHITE 12"x12" AND 24"x24"

RETURN GRILLE TO BE WHITE WALL-MOUNTED AT PLENUM WALL

EXHAUST FAN GRILLE TO BE WHITE CEILING-MOUNTED

CABINETS TO BE TOFFEE STAIN MAPLE w/ SENECA RIDGE STYLE DOORS/DRAWERS COUNTERTOP TO BE SELECTED FROM MFRS. STD. COLORS H.P. LAMINATE; INCLUDES BACK AND SIDE SPLASHES

QUOTE NUMBER 49675-99 DATE 6/3/2022

MODULAR MANUFACTURERS SCOPE CLARIFICATIONS

SECTION

FLOOR

THIS BUILDING HAS WHEEL WELLS REMOVAL OF PROTECTIVE WELL COVER AND INFILL REQUIRED ON SITE

BOTTOM BOARD BOTTOM BOARD MATERIAL SHIPS LOOSE IN AXLE AREA, INSTALLATION

IN THIS AREA BY OTHERS ON SITE

INSULATION INSULATION SHIPPED LOOSE IN AXLE AREAS, INSTALLATION BY

OTHERS ON SITE

INSULATION INSULATION FOR MATE LINES SHIPS LOOSE FOR INSTALLATION BY OTHERS

DECKING DECKING HELD BACK AT MATE LINES, INSTALLATION AT MATE LINES BY

OTHERS ON SITE

FLOOR COVERING COVERING HELD BACK AT MODULE MATE LINES, MATERIAL SHIPPED

LOOSE FOR INSTALLATION BY OTHERS

COVE BASE COVE BASE SHIPPED LOOSE WHERE FLOOR COVERING IS HELD OUT FOR

INSTALLATION BY OTHERS

WALLS AND PARTITIONS

WALL COVERING WALL COVERING HELD BACK AT MATE LINE, SEAM CLOSURE MATERIAL SHIPS

LOOSE FOR INSTALL BY OTHERS

SIDING SIDING NOT HELD BACK AT MATE LINE, STEELCLOSURE SHIPS LOOSE FOR

INSTALLATION BY OTHERS

INSULATION FOAM INSULATION BOARD NOT HELD BACK, SHIP LOOSE FOAM BACKER

ROD FOR SEAMS

AIR BARRIER AIR BARRIER ROLLED BACK AT MATE LINES, TAPING OF THE SEAMS AT MATE

LINE BY OTHERS

SKIRT MATCHING SKIRT SHIPS LOOSE IN FULL SHEETS FOR INSTALLATION BY OTHERS

ROOF

ROOFING MATE LINE FLASHING SHIPS LOOSE FOR INSTALLATION BY OTHERS

INSULATION INSULATION FOR MATE LINE SHIPS LOOSE FOR INSTALLATION BY OTHERS

VENT EXTENSIONS VENT PIPING THROUGH ROOF IS SHIPPED LOOSE FROM FACTORY FOR

INSTALLATION BY OTHERS AT SITE

VENT EXTENSIONS VENT FLASHING SHIPPED LOOSE FOR INSTALLATION BY OTHERS

EXHAUST CAPS CAPS AND FLASHING SHIP LOOSE FOR INSTALLATION BY OTHERS

ATTIC VENTS BASE INSTALLED AT FACTORY, EXTENSIONS AND CAPS SHIP LOOSE FOR

INSTALLATION BY OTHERS

DOORS

ADJUSTMENTS FINAL ADJUSTMENTS OF DOORS AFTER MODULES ARE SET IS BY OTHERS

KEYING DOORS KEYED PER FUNCTION

QUOTE NUMBER 49675-99 DATE 6/3/2022

MODULAR MANUFACTURERS SCOPE CLARIFICATIONS

SECTION

ELECTRIC

LOAD CENTER ONE LOAD CENTER PER MODULE, INTERCONNECT TO MDP BY OTHERS

LOAD CENTER MDP BY FACTORY

LIGHTING REMOTE EMERGENCY HEADS SHIP LOOSE FOR INSTALLATION BY OTHERS

EGRESS LIGHTING CONNECTION OF BATTERIES REQUIRED ON SITE BY OTHERS

RECEPTS HEAT TAPE SUPPLIED AND INSTALLED BY OTHERS ON SITE

ROUGH IN'S PVC CONDUIT TO ABOVE CEILING WITH PULL WIRE ONLY, ALL WIRING AND DEVICES BY OTHERS

SWITCHES OCCUPANCY SENSORS MAY REQUIRE ADJUSTMENT BY OTHERS ON SITE

LOW VOLTAGE LOW VOLTAGE WIRING SUPPLIED AND INSTALLED BY OTHERS ON SITE

PLUMBING

SUPPLY PIPING BACK FLOW PREVENTER BY OTHERS

WASTE PIPING PLUMBING DROP PER FIXTURE, MANIFOLD SUPPLIED AND INSTALLED BY OTHERS WASTE PIPING VENT PIPING TERMINATES AT UNDER SIDE OF ROOF, EXTENSION INSTALLED BY OTHERS ON SITE

WASTE PIPING VENT PIPE FLASHING SHIPPED LOOSE FOR INSTALLATION BY OTHERS

HVAC

GRILLS AND DIFFUSERS GRILLES AND DIFFUSERS STRAPPED TO SUB CEILING WHERE GRID CEILING IS HELD OUT BY FACTORY

EXHAUST EXHAUST FAN CAPS AND FLASHING SHIP LOOSE FOR INSTALLATION BY OTHERS

CONTROLS THERMOSTAT INSTALLED BY FACTORY, START UP AND PROGRAMMING BY OTHERS

TESTING TESTING OF HVAC SYSTEM AFTER START UP BY OTHERS

BALANCING BALANCING OF HVAC SYSTEM AFTER START UP BY OTHERS

MISC

CASEWORK ADJUSTMENT OF DOORS MAY BE REQUIRED BY OTHERS ON SITE

WARRANTY

WARRANTY MANUFACTURERS STANDARD WARRANTY APPLIES, DOCUMENTS SHIP LOOSE IN WARRANTY PACK

WARRANTY COMPONENT MANUFACTURERS EXTENDED WARRANTY ARE PASSED TO END USER

WARRANTY MANUFACTURING PLANT MUST BE NOTIFIED OF ANY WARRANTY CLAIMS

WARRANTY WARRANTY CLAIMS WILL NOT BE REIMBURSED WITHOUT NOTIFICATION AND PRIOR APPROVAL

No. Description Date 1 Revisions per customer comments 06.29.2022

Window Schedule Mark Description Count Width Height Rough Width Rough Height Sill Height Glazing U-Factor SHGC VT Ventilation Comments

G1 VINYL-FRAMED HORIZONTAL SLIDER 4 3' - 10" 2' - 3" 3' - 10 1/2" 2' - 3 1/2" 4' - 7" "CLEAR" D.I.G. w/ ARGON GAS FILL 0.29 0.30 0.56 87 CFM

1st Floor 2' - 11 1/2"

Roof Peak Height 13' - 6"

OUTSIDE CORNER

TRIM (TYP)

BOTTOM TRIM (TYP)

TOP TRIM (TYP)

J-CHANNEL

AROUND WINDOW

1/4" / 1'-0"1/4" / 1'-0"

G1G1 2.5T/9kW

SPVAC

EXHAUST CAP;

FROM EXH FAN

1st Floor 2' - 11 1/2"

Roof Peak Height 13' - 6"

OUTSIDE CORNER

TRIM (TYP)

BOTTOM TRIM (TYP)

TOP TRIM (TYP)

1/4" / 1'-0" 1/4" / 1'-0"

F1

G1 G1

J-CHANNEL

AROUND DOOR

J-CHANNEL

AROUND WINDOW2.5T/9kW

SPVAC

EXTERIOR LIGHT

EXT. DUPLEX

RECEPTACLE w/

IN-USE W.P. COVER

1st Floor 2' - 11 1/2"

Roof Peak Height 13' - 6"

OUTSIDE CORNER

TRIM (TYP)

BOTTOM TRIM (TYP)

TOP TRIM (TYP)

J-CHANNEL

AROUND DOOR

EXTERIOR LIGHT

EXT. DUPLEX

RECEPTACLE w/

IN-USE W.P. COVER

(5) PIN, PIN AND SLEEVE

FEMALE RECEPTACLE

F1

DPB

1st Floor 2' - 11 1/2"

Roof Peak Height 13' - 6"

OUTSIDE CORNER

TRIM (TYP)

BOTTOM TRIM (TYP)

TOP TRIM (TYP)

EXT. DUPLEX

RECEPTACLE w/

IN-USE W.P. COVER

2.5T/9kW

SPVAC

2.5T/9kW

SPVAC

J-CHANNEL AROUND

WALL-MOUNTED

H.V.A.C. UNITS (TYP)

BASE TRIM

/2

1"

/2

COLOR SIDE

/8

4 1/8"

1"

1"

/8

5/8"

COLOR SIDE

OUTSIDE CORNER

COLOR SIDE

/8

7/8"

2 1/8"

J-CHANNEL

SIDING PROFILE

6"

TOP TRIM

COLOR SIDE

/4

9"

COLOR SIDE

/4

U-CHANNEL INSERT TRIM

3/4"

1st- floor12 1st- w alls- columns24 1st- flel- drs10 1st- flel9 1st-flme- p11 1st- walls23 common27 1st-common1 1st- floor- dim130 0

Drawn By: Serial No.

Page No.

Scale:

THIS DRAWING AND ALL INFORMATION

CONTAINED HEREON IS THE

PROPERTY OF WHITLEY MFG. CO. INC.,

AND IS NOT TO BE REPRODUCED

WITHOUT THE EXPRESS PERMISSION

OF WHITLEY MFG. CO., INC.

WHITLEY MFG. CO. INC., ASSUMES NO

RESPONSIBILITY FOR UNAUTHORIZED

USE OF THIS DRAWING.

Quote No.

Model No.

Job No.

Date:

Rev:

Checked By:

No. Description Date Whitley East, LLC

64 HESS ROAD

LEOLA, PA 17540

PHONE: 717.656.2081

www.whitleyman.com

C U

ST

O

M

ER

A

PP

R O

VA

L

SE

T

6/

/2

7:

:3

AM

As indicated

6/30/2022

7:00:32 AM

A1.02022-072-WP

EP 2696-97

49675-99

DL/CZ

(2) 10'-0" x 52'-0" MODULES

EXTERIOR ELEVATIONS

SUSTAINABLE MODULAR MANAGEMENT

NAVAL UNDERSEA WARFARE CENTER

3/8" = 1'-0"1 South Elevation

3/8" = 1'-0"2 North Elevation

3/8" = 1'-0"3 West Elevation 3/8" = 1'-0"4 East Elevation

3" = 1'-0"5 Steel Siding and Trims

No. Description Date 1 Revisions per customer comments 06.29.2022

R ef rig er at or

EX/EM

EX

/E

M

PCE

S

S

PC

E

80 CFM

PCE

EX/EM

G

FC

I R

H T

W P

O

M F

S

T

MODULE 2

S/N: 2697

MODULE 1

S/N: 26962.

5T /9 kW

SP

VA

C

2.

5T

/9 kW

SP

VA

C

PN

L-

PN

L-

/2

F1

F1

F2

S5.1

SIDING TO SIDING

52' - 5 1/2"

D

PB

MODULE LENGTH

52' - 0" TYP

S

ID

IN

G

T O

S

ID

I N G

M O

D U

L E

W

ID

T H

M A

T E

G A

P /2

T

Y P

M O

D U

L E

W

ID

T H

/8

10' - 9"

G1 G1

G1G1

A2.13Ty p

Typ

A2.1 5 Ty p

Typ

M

IN

18"

/4

/4

17' - 4" 17' - 9 1/2" 17' - 4"

17' - 4" 17' - 9 1/2" 13' - 2 3/4" 4' - 1 1/4"

852 SF

OPEN OFFICE

72 SF

RESTROOM

PN

L-

PNL-2

2.

5T

/9 kW

SP

VA

C 2.

5T /9 kW

SP

VA

C

W R

G W

R G

REPRESENTS SHIPPED

LOOSE CEILING TILE, GRID,

AND WALL ANGLE FOR

INSTALL BY CERTIFIED INSTALLER

MODULE 2

S/N: 2697

MODULE 1

S/N: 2696

D

PB

F1

F1

F2

/1

3' - 9 1/2" 21 1/4"

/2

/2

21 1/4"

PNL

ITEMS REPRESENTED BY DASHED LINES TO BE

SHIPPED LOOSE FOR INSTALL ON SITE BY OTHERS

Legend

120/208V 3-PH

PANELBOARD

5-PIN 120/208V 3-PH

PIN AND SLEEVE

RECEPTACLE

2'x4' L.E.D. LAY-IN PANEL LIGHT w/

LENSE

2'x4' L.E.D. LAY-IN PANEL LIGHT w/

LENSE AND BATTERY

BACK-UP

EXTERIOR LIGHT w/

PHOTOCELL CONTROLS

AND BATTERY BACK-UP

EXIT/EMERGENCY LIGHT

w/ BATTERY BACK-UP

125V/20A DUPLEX

RECEPTACLE - UP

18" A.F.F., UNO

125V/20A GFCI DUPLEX

RECEPTACLE - UP

18" A.F.F., UNO

125V/20A GFCI BREAKER

PROTECTED DUPLEX

RECEPTACLE FOR REFRIGERATOR

UP 18" A.F.F., UNO

125V/20A GFEP BREAKER

PROTECTED DUPLEX

RECEPTACLE FOR HEAT TAPE

125V/20A WEATHER-RESISTANT

GFCI DUPLEX RECEPTACLE w/

WEATHER-PROOF IN-USE COVER

UP 6" A.F.F.

120V/20A 3-WAY SWITCH

UP 44" A.F.F.

120V/20A OCCUPANCY/VACANCY

SENSOR; WALL MOUNTED

UP 44" A.F.F.

120V/20A OCCUPANCY/VACANCY

SENSOR; CEILING MOUNTED

D PB 24"x24"x8"D DATA PULL

BOX - UP 60" A.F.F. TO TOP

DATA ROUGH-IN

UP 18" A.F.F.

MANUAL PULL STATION

FIRE ALARM ROUGH-IN

UP 44" A.F.F.

AUDIO/VISUAL DEVICE

FIRE ALARM ROUGH-IN

UP 44" A.F.F.

SMOKE DETECTOR

FIRE ALARM ROUGH-IN

GRAB BAR; SEE FLOOR PLAN

AND INTERIOR ELEVATIONS

18" x 36" STAINLESS STEEL

FRAMED MIRROR

TOILET PAPER

DISPENSER

24" x 24" SUPPLY AIR

DIFFUSER (LAY-IN)

12" x 12" SUPPLY AIR

DIFFUSER (LAY-IN)

W R

G WALL RETURN GRILLE

AT PLENUM WALL

80 CFM 80 CFM CEILING-

MOUNTED EXHAUST FAN

PROGRAMMABLE

THERMOSTAT

UP 48" A.F.F.

125V/20A QUADRUPLEX

RECEPTACLE - UP

18" A.F.F., UNO

125V/20A L5-20R "TWIST-LOCK"

RECEPTACLE - CELING MOUNTED

1st Floor 2' - 11 1/2"

HOLD

31 1/2" CLEAR

15"x15" BAR SINK w/

GOOSENECK

FAUCET

4' - 1"

48" SINK BASE

125V/20A GFCI

APPLIANCE

RECEPTACLES

125V/20A GFCI

PROTECTED

DUPLEX RECEPTACLE 3

/4

SIDESPLASH

1st Floor 2' - 11 1/2"

25"

/4

/2

4"

1st Floor 2' - 11 1/2"

M A

X

M A

X

WALL-HUNG

LAVATORY w/ 4"

CENTERSET FAUCET

18" x 36" STAINLESS

STEEL FRAMED MIRROR

M

IN

1st Floor 2' - 11 1/2"

42" MIN

MAX

12"

54" MIN

39" - 41"

M

IN

M

INM

IN

/2

24" MIN

42" MAX

GRAB BAR

TOILET PAPER

DISPENSER

TANK-TYPE WATER

CLOSET

1st Floor 2' - 11 1/2"

24" MIN

MIN

12"

36" MIN

16" - 18"

TANK-TYPE WATER

CLOSET

GRAB BAR

1st- floor12 1st- w alls- columns24 1st- flel- drs10 1st- flel9 1st-flme- p11 1st- walls23 common27 1st-common1 1st- floor- dim130 0

Drawn By: Serial No.

Page No.

Scale:

THIS DRAWING AND ALL INFORMATION

CONTAINED HEREON IS THE

PROPERTY OF WHITLEY MFG. CO. INC.,

AND IS NOT TO BE REPRODUCED

WITHOUT THE EXPRESS PERMISSION

OF WHITLEY MFG. CO., INC.

WHITLEY MFG. CO. INC., ASSUMES NO

RESPONSIBILITY FOR UNAUTHORIZED

USE OF THIS DRAWING.

Quote No.

Model No.

Job No.

Date:

Rev:

Checked By:

No. Description Date Whitley East, LLC

64 HESS ROAD

LEOLA, PA 17540

PHONE: 717.656.2081

www.whitleyman.com

C U

ST

O

M

ER

A

PP

R O

VA

L

SE

T

6/

/2

7:

:3

AM

As indicated

6/30/2022

7:00:33 AM

A2.12022-072-WP

EP 2696-97

49675-99

DL/CZ

(2) 10'-0" x 52'-0" MODULES

ARCHITECTURAL PLANS AND ELEVATIONS

SUSTAINABLE MODULAR MANAGEMENT

NAVAL UNDERSEA WARFARE CENTER

3/8" = 1'-0"1 Floor Plan

3/8" = 1'-0"2 Reflected Ceiling Plan

No. Description Date 1 Revisions per customer comments 06.29.2022

3/8" = 1'-0"3 Casework Elevation

3/8" = 1'-0"4 Casework Section

1/2" = 1'-0"5 Restroom Elevation 1

1/2" = 1'-0"6 Restroom Elevation 2

1/2" = 1'-0"7 Restroom Elevation 3

1"

4" 4 1/2"

4 1/2"4" 1"1"

4"4 1/2"

4 1/2" 4" 1"

25"25"

STEP #1

PLACE COLLAR BASE ON ROOFING (PER PLAN

LOCATIONS) AND TRACE INSIDE OF COLLAR.

STEP #2

CUT OUT ROOFING AND SHEATHING USING A RECIPROCAL SAW WITH A

4"L BLADE, CUTTING AROUND THE TRACED LINES PER STEP #1

STEP #3

PLACE COLLAR BASE, CENTERED OVER CUT-OUT.

FASTEN DOWN WITH #10-16 x 1 1/2"L PAN-HEAD

SHEET METAL SCREWS PER PATTERN SHOWN.

STEP #4

USING 6" WIDE SEAM TAPE, FLASH AROUND PERIMETER

OF BASE COLLAR, AND APPLY LAP SEALANT AT

OUTBOARD AND INBOARD EDGES OF FLASHING TAPE

3" 3"

STEP #5

INSTALL CAP OVER BASE COLLAR FOR SHIPMENT; AURA OR POP VENT WITH 6"

COLLARS TO BE SHIPPED LOOSE IN MODULES FOR INSTALLATION ON SITE BY

OTHERS

INTAKE FRAMING

VENT (TYP)

EXHAUST FRAMING

VENT (TYP)

1/4" / 1'-0" 1/4" / 1'-0"

A7.1

Typ

A7.1

Typ

A7.1

Typ

A7.1

Typ

A7.1

Typ

MATELINE

EXT. WALL STRUCTURE

ROOF STRUCTURE

ROOF MEMBRANE

29ga STEEL TOP TRIM;

HORIZTONAL LEG

INSTALLED OVER ROOF

MEMBRANE (TYP)

29ga STEEL SIDING

1 1/2"T FOIL-FACED

RIGID INSULATION

1/2" F.R.T. PLYWOOD

SHEATHING (TYP)

LUMBER NAILER

AT TOP OF WALL

HEX WASHER HEAD SCREW

AT TOP TRIM AT 6" O.C.

6"W SEAM TAPE OVER

HORIZONTAL LEG OF

TOP TRIM; TAPE PRIMER

APPLIED OVER ROOF

MEMBRANE AND HORIZTONAL

LEG OF TOP TRIM

CONTINUOUS BEAD OF

LAP SEALANT AT OUTBOARD

EDGE OF SEAM TAPE

ROOF STRUCTURE

EPDM PIPE BOOT; SHIPPED

LOOSE AND INSTALLED BY

CERTIFIED INSTALLER

VENT-THRU ROOF

PIPE EXTENSION; SHIPPED

LOOSE AND INSTALLED BY

CERTIFIED INSTALLER

TAPE PRIMER; SHIPPED

LOOSE AND APPLIED BY

CERTIFIED INSTALLER

WATER CUT-OFF MASTIC;

SHIPPED LOOSE AND APPLIED

BY CERTIFIED INSTALLER

STAINLESS STEEL PIPE

CLAMP; SHIPPED LOOSE

AND INSTALLED BY

CERTIFIED INSTALLER

LAP SEALANT APPLIED

AROUND PERIMETER OF

PIPE BOOT; SHIPPED

LOOSE AND INSTALLED

BY CERTIFIED INSTALLER

LAP SEALANT APPLIED

AROUND PERIMETER OF

PIPE BOOT; SHIPPED

LOOSE AND INSTALLED

BY CERTIFIED INSTALLER

1st- floor12 1st- w alls- columns24 1st- flel- drs10 1st- flel9 1st-flme- p11 1st- walls23 common27 1st-common1 1st- floor- dim130 0

Drawn By: Serial No.

Page No.

Scale:

THIS DRAWING AND ALL INFORMATION

CONTAINED HEREON IS THE

PROPERTY OF WHITLEY MFG. CO. INC.,

AND IS NOT TO BE REPRODUCED

WITHOUT THE EXPRESS PERMISSION

OF WHITLEY MFG. CO., INC.

WHITLEY MFG. CO. INC., ASSUMES NO

RESPONSIBILITY FOR UNAUTHORIZED

USE OF THIS DRAWING.

Quote No.

Model No.

Job No.

Date:

Rev:

Checked By:

No. Description Date Whitley East, LLC

64 HESS ROAD

LEOLA, PA 17540

PHONE: 717.656.2081

www.whitleyman.com

C U

ST

O

M

ER

A

PP

R O

VA

L

SE

T

6/

/2

7:

:3

AM

As indicated

6/30/2022

7:00:35 AM

A7.12022-072-WP

EP 2696-97

49675-99

DL/CZ

(2) 10'-0" x 52'-0" MODULES

ROOFTOP PLAN

SUSTAINABLE MODULAR MANAGEMENT

NAVAL UNDERSEA WARFARE CENTER

1/2" = 1'-0"3 Roof Vent Install Instructions

ALL ROOF PENETRATIONS TO BE MARKED ON ROOFING;

I.E. "EXH.", "VENT" ETC.

3/8" = 1'-0"1 Roof Top Plan

1 1/2" = 1'-0"2 Roofing Detail - Edge Termination

1 1/2" = 1'-0"4 Roof Flashing Detail - VTR

No. Description Date

S P

E C

IF

IC

A T

IO

N

S

H E

IG

H

T P

E R

TWO-GANG METALLIC

JUNCTION BOX (TYP)

MUD-RING EXTENSION

WALL COVERING

FINISHED FLOOR

NOTE:

PER NATIONAL ELECTRICAL CODE,

ARTICLE 314.20, MUD-RING EXTENSIONS

SHALL BE FLUSH WITH WALL COVERINGS

WITH A MAXIMUM DEPTH BEHIND THE

SURFACE OF THE COVERING OF 1/4"

FOR WOOD WALL COVERINGS, THE MUD-

RING EXTENSION SHALL BE FLUSH OR

EXTEND BEYOND THE SURFACE OF THE

WALL COVERING

DATA OUTLET

CONDUIT STUBBED

TO ABOVE CEILING CAVITY

FOR COMPLETION AT SITE

BLANK COVER PLATE

INSTALLED IN FACTORY

CEILING

MC CABLE TO TERMINATION MC CABLE TO TERMINATION

PRE-WIRED GREENFIELD "WHIP" OUT OF

JUNCTION BOX TO BE WIRED TO RELATED

JUNCTION BOX IN ADJACENT MODULE

NOTE:

ALL CROSS-SEAM CONNECTIONS MUST BE LABELED

BY PANEL NAME AND CIRCUIT NUMBER (i.e. "PNL1-1")

LIGHTING CIRCUITS TO HAVE ADDITIONAL NOMENCLATURE

FOR SWITCHLEG OR TRAVELER (i.e. PNL1-1 S/L)

1st- floor12 1st- w alls- columns24 1st- flel- drs10 1st- flel9 1st-flme- p11 1st- walls23 common27 1st-common1 1st- floor- dim130 0

Drawn By: Serial No.

Page No.

Scale:

THIS DRAWING AND ALL INFORMATION

CONTAINED HEREON IS THE

PROPERTY OF WHITLEY MFG. CO. INC.,

AND IS NOT TO BE REPRODUCED

WITHOUT THE EXPRESS PERMISSION

OF WHITLEY MFG. CO., INC.

WHITLEY MFG. CO. INC., ASSUMES NO

RESPONSIBILITY FOR UNAUTHORIZED

USE OF THIS DRAWING.

Quote No.

Model No.

Job No.

Date:

Rev:

Checked By:

No. Description Date Whitley East, LLC

64 HESS ROAD

LEOLA, PA 17540

PHONE: 717.656.2081

www.whitleyman.com

C U

ST

O

M

ER

A

PP

R O

VA

L

SE

T

6/

/2

7:

:3

AM

As indicated

6/30/2022

7:00:35 AM

E1.02022-072-WP

EP 2696-97

49675-99

DL/CZ

(2) 10'-0" x 52'-0" MODULES

ELECTRICAL NOTES AND DETAILS

SUSTAINABLE MODULAR MANAGEMENT

NAVAL UNDERSEA WARFARE CENTER

CONDUIT FILL NOTES:

1.) ALL ELECTRICAL WORK SHALL BE COMPLIANT WITH THE 2020 NFPA 70 NATIONAL ELECTRICAL CODE.

2.) ELECTRICAL DRAWINGS ARE DIAGRAMMATICAL ONLY; REFER TO THE NOTES BELOW FOR MOUNTING REQUIREMENTS.

3.) CONDUITS ARE TO BE MOUNTED IN A NEAT AND WORKMAN-LIKE FASHION; EXPOSED CONDUITS ARE TO BE PARALLEL WITH BUILDING STRUCTURAL COMPONENTS AND/OR WALLS; EXPOSED CONDUITS ARE NOT TO BE MOUNTED BELOW 8'-6"

ABOVE THE FINISHED FLOOR.

4.) CONDUIT AND CABLE UTILIZATION SHALL CONFORM TO THE FOLLOWING:

A. ELECTRICAL METALLIC TUBING (EMT) - INDOOR MAIN FEEDERS; FITTINGS SHALL BE STEEL AND COMPRESSION OR SET SCREW TYPES; EMT TO BE SECURED 3 FEET AWAY FROM OUTLET, JUNCTION, WIRE PULL, OR OTHER BOXES/TERMINATION POINTS AND 10 FEET O.C. INTERMITTENTLY TO FRAMING MEMBERS.

B. NON-METALLIC SHEATHED CABLE (NM-B CABLE) - INDOOR BRANCH CIRCUITING IN WALL CAVITIES;

FITTINGS SHALL BE LISTED FOR USE WITH NM-B CABLE; NM-B CABLE TO BE

SECURED 1 FOOT AWAY FROM OUTLET, JUNCTION, WIRE PULL, OR OTHER BOXES/TERMINATIONS

AND 4.5 FEET O.C. INTERMITTENTLY TO FRAMING MEMBERS.

C. METAL-CLAD CABLE (MC CABLE) - INDOOR BRANCH CIRCUITING IN CEILING CAVITIES

AND CONCEALED LOCATIONS; FITTINGS SHALL BE LISTED FOR USE WITH MC CABLE; MC CABLE TO BE SECURED 1 FOOT AWAY FROM OUTLET, JUNCTION, WIRE PULL, OR OTHER BOXES/TERMINATIONS

AND 6 FEET O.C. INTERMITTENTLY TO FRAMING MEMBERS.

D. FLEXIBLE METALLIC TUBING (FMT) - FOR INDOOR MATELINE CROSS OVER CONNECTIONS; FITTINGS SHALL BE LISTED FOR USE WITH FMT; FMT TO BE SECURED 1 FOOT AWAY FROM OUTLET, JUNCTION, WIRE PULL, OR OTHER BOXES/TERMINATION POINTS AND 6 FEET O.C. INTERMITTENTLY TO FRAMING MEMBERS.

5.) JUNCTION, OUTLET, DEVICE, AND WIRE PULL BOXES AND CONDUIT BODIES SHALL BE METALLIC, LISTED FOR USE IN ELECTRICAL SYSTEMS 0 - 1,000 VOLTS, AND SHALL CONTAIN A BONDING GROUND WIRE, AND A COMPATIBLE COVER.

6.) JUNCTION BOXES THAT ARE FLUSH-MOUNTED (BEHIND WALL FINISH) SHALL BE EQUIPPED WITH APPROPRIATE SURFACE EXTENSIONS AND SHALL BE MOUNTED TO A FRAMING MEMBER WITH APPROVED FASTENERS AND/OR SUPPORTS.

7.) JUNCTION BOXES THAT ARE SURFACE MOUNTED (ON TOP OF WALL FINISH) SHALL BE SECURELY FASTENED TO

FRAMING MEMBERS AND/OR BLOCKING.

8.) FLOOR JUNCTION BOXES SHALL BE LISTED SPECIFICALLY FOR THIS APPLICATION.

9.) JUNCTION BOXES MOUNTED IN CEILING CAVITIES OF A SUSPENDED CEILING SHALL BE SECURELY FASTENED TO

STRUCTURAL FRAMING MEMBERS.

10.) JUNCTION BOXES MOUNTED IN FRAMING MEMBERS OF AN ENCLOSED CEILING (GYPSUM BOARD OR OTHER) SHALL

COMPLY WITH NOTE #6.

11.) CONDUIT BODIES SHALL BE ACCESSIBLE AND SHALL NOT EXCEED THE WIRE FILL OF THE NOMINAL CONDUIT TRADE SIZE.

12.) ALL METAL BOXES AND CONDUIT BODIES ARE TO BE CORROSION RESISTANT AND CONFORM TO THE FOLLOWING:

A. SHEET STEEL BOXES NOT OVER 100 in.3 SHALL BE MADE FROM STEEL NOT LESS THAN 0.0625 in. THICK.

B. SHEET STEEL BOXES OVER 100 in.3 SHALL BE MADE FROM STEEL NOT LESS THAT 0.053 in. THICK.

C. CONDUIT BODIES MADE OF MALLEABLE IRON, DIE-CAST ALUMINUM, BRASS, BRONZE OR ZINC SHALL NOT HAVE A WALL THICKNESS LESS THAN 3/32 in.

D. CONDUIT BODIES OR METAL BOXES NOT MADE OF MATERIALS LISTED ABOVE ARE TO HAVE A WALL THICKNESS OF NOT LESS THAN 1/8 in.

E. SHEET STEEL JUNCTION BOXES NOT OVER 16 in² THAT ARE LOCATED IN A FIRE-RATED WALL

ASSEMBLY SHALL BE COVERED WITH LISTED PUTTY PADS.

13.) ALL WIRING TO BE TYPE THHN COPPER UNLESS NOTED OTHERWISE.

14.) ALL WIRING SHALL BE STRANDED CONDUCTOR.

15.) 20 AMP CIRCUITS WITH DEVELOPED LENGTHS 100 FEET AND GREATER SHALL HAVE A HOMERUN

CONDUCTOR OF #10 AWG MINIMUM

16.) CONDUCTORS SHALL CONFORM TO THE FOLLOWING COLOR CODES:

A. 120/208V THREE PHASE

i. PHASE A = BLACK

ii. PHASE B = RED

iii. PHASE C = BLUE

iv. SWITCHLEG = PURPLE

v. TRAVELER = PINK

vi. NEUTRAL = WHITE

vii. GROUND = GREEN

17.) WIRE FILLS PER CONDUIT TYPE SHALL CONFORM TO INFORMATIVE ANNEX C AS PER BELOW:

A. EMT - TABLE C.1

B. FMC - TABLE C.3

18.) NOT MORE THAN NINE CURRENT CARRYING CONDUCTORS SHALL BE PERMITTED IN A SINGLE

CONDUIT FOR CIRCUITS 30 AMPS OR LESS.

19.) ALL CONDUCTORS IN ACCESSIBLE BOXES OR CONDUIT BODIES ARE TO BE LABELED PER

LOADCENTER AND CIRCUIT WITH TYPE-WRITTEN LABELS.

20.) CONDUIT ROUGH-INS ARE TO INCLUDE A 200 LB. RATED NYLON OR EQUAL PULL STRING.

21.) ALL ELECTRICAL EQUIPMENT IS TO BE INSTALLED IN ACCORDANCE WITH THE MANUFACTURER'S

INSTALLATION INSTRUCTIONS AND THE 2020 NFPA 70 NATIONAL ELECTRICAL CODE.

22.) ALL PANELBOARDS TO HAVE COPPER NEUTRAL BUS AND LUGS. LUGS SHALL BE SIZED TO

ACCOMMODATE INDICATED CONDUCTOR SIZES.

23.) ALL PANELBOARD ENCLOSURES TO BE NEMA RATED FOR LOCATION(S) MOUNTED, AND SHALL

INCLUDE LOCKABLE DOORS.

24.) ALL PANELBOARDS TO HAVE TYPE-WRITTEN BREAKER DIRECTORIES MOUNTED TO THE INSIDE

OF THE DOOR IN ACCORDANCE WITH WHITLEY EAST LLC QUALITY CONTROL MANUAL.

25.) MAIN DISTRIBUTION PANELBOARD TO BE MARKED "SUITABLE FOR USE AS SERVICE EQUIPMENT"

AND HAVE BREAKER / FUSE TYPE OVERCURRENT PROTECTION.

26.) PROPER THERMAL OVERLOAD PROTECTION TO BE PROVIDED FOR ALL MOTORS.

27.) DISCONNECTING MEANS WITHIN SIGHT REQUIRED FOR ALL MOTORS.

28.) WEATHERPROOF PROTECTION REQUIRED FOR ALL OUTDOOR LIGHTS

AND / OR RECEPTACLES.

29.) PROPER WORKING CLEARANCES TO BE PROVIDED AND MAINTAINED ABOUT

ALL ELECTRICAL EQUIPMENT.

30.) ALL FLUORESCENT ONLY FIXTURES REQUIRE THERMAL PROTECTION.

31.) COMBINATION EXHAUST FAN/LIGHT AND RECESSED INCANDESCENT FIXTURES

TO HAVE THERMAL PROTECTION.

32.) ALL EMERGENCY LIGHTING (IF REQUIRED) AND EXIT SIGNS WILL BE CONNECTED

AHEAD OF ANY LOCAL SWITCHES PER 2020 NPFA 70 NATIONAL ELECTRICAL CODE,

ARTICLE 700.20.

33.) ALL EMERGENCY LIGHTING SHALL HAVE A BATTERY PACK TO ASSURE CONTINUED ILLUMINATION.

34.) GROUNDING ELECTRODE SHALL BE INSTALLED IN ACCORDANCE WITH 2020 NFPA 70

NATIONAL ELECTRICAL CODE, ARTICLE 250

35.) MAIN DISTRIBUTION PANEL OR DISCONNECT SWITCHES(S) SHALL BE INSTALLED ON SITE

PER CONTRACTUAL AGREEMENT

36.) SERVICE ENTRANCE CONDUCTORS TO BE TYPE THWN COPPER.

37.) HEAT TAPE RECEPTACLES TO BE PROTECTED BY A DEDICATED GFEP CIRCUIT

BREAKER PER 2020 NFPA 70 NATIONAL ELECTRICAL CODE, ARTICLE 426.28; RECEPTACLE

TO BE WEATHER-RESISTANT WITH A WEATHERPROOF COVER PER 2020 NFPA 70

NATIONAL ELECTRICAL CODE, ARTICLE 406.9(A).

38.) WATER HEATER TO HAVE LOCKABLE BREAKER OR PROVIDE DISCONNECTING

MEANS WITHIN SIGHT OF WATER HEATER PER 2020 NFPA 70 NATIONAL ELECTRICAL CODE,

ARTICLE 422.

1" = 1'-0"1 Electrical Detail - Extension Rings

3/4" = 1'-0"2 Electrical Detail - Data Rough-In

3/4" = 1'-0"3 Mateline Connection - Electrical

PCE

EX/EM

G

FC

I R

H T

W P

O

M F

S

T

R ef rig er at or

W P

GFCI

+18"

R

GFCI

+44"

EX/EM

EX

/E

M

PCE

T T

G

FC

I +18"

O S

S

FF

F

F MMPC

E

H T

J

J

J

80 CFM

G

FC

I +44" G

FC

I

+44" G

FC

I +44"

WP

W P

PNL

ITEMS REPRESENTED BY DASHED LINES TO BE

SHIPPED LOOSE FOR INSTALL ON SITE BY OTHERS

Legend

120/208V 3-PH

PANELBOARD

5-PIN 120/208V 3-PH

PIN AND SLEEVE

RECEPTACLE

2'x4' L.E.D. LAY-IN PANEL LIGHT w/

LENSE

2'x4' L.E.D. LAY-IN PANEL LIGHT w/

LENSE AND BATTERY

BACK-UP

EXTERIOR LIGHT w/

PHOTOCELL CONTROLS

AND BATTERY BACK-UP

EXIT/EMERGENCY LIGHT

w/ BATTERY BACK-UP

125V/20A DUPLEX

RECEPTACLE - UP

18" A.F.F., UNO

125V/20A GFCI DUPLEX

RECEPTACLE - UP

18" A.F.F., UNO

125V/20A GFCI BREAKER

PROTECTED DUPLEX

RECEPTACLE FOR REFRIGERATOR

UP 18" A.F.F., UNO

125V/20A GFEP BREAKER

PROTECTED DUPLEX

RECEPTACLE FOR HEAT TAPE

125V/20A WEATHER-RESISTANT

GFCI DUPLEX RECEPTACLE w/

WEATHER-PROOF IN-USE COVER

UP 6" A.F.F.

120V/20A 3-WAY SWITCH

UP 44" A.F.F.

120V/20A OCCUPANCY/VACANCY

SENSOR; WALL MOUNTED

UP 44" A.F.F.

120V/20A OCCUPANCY/VACANCY

SENSOR; CEILING MOUNTED

D PB 24"x24"x8"D DATA PULL

BOX - UP 60" A.F.F. TO TOP

DATA ROUGH-IN

UP 18" A.F.F.

MANUAL PULL STATION

FIRE ALARM ROUGH-IN

UP 44" A.F.F.

AUDIO/VISUAL DEVICE

FIRE ALARM ROUGH-IN

UP 44" A.F.F.

SMOKE DETECTOR

FIRE ALARM ROUGH-IN

GRAB BAR; SEE FLOOR PLAN

AND INTERIOR ELEVATIONS

18" x 36" STAINLESS STEEL

FRAMED MIRROR

TOILET PAPER

DISPENSER

24" x 24" SUPPLY AIR

DIFFUSER (LAY-IN)

12" x 12" SUPPLY AIR

DIFFUSER (LAY-IN)

W R

G WALL RETURN GRILLE

AT PLENUM WALL

80 CFM 80 CFM CEILING-

MOUNTED EXHAUST FAN

PROGRAMMABLE

THERMOSTAT

UP 48" A.F.F.

125V/20A QUADRUPLEX

RECEPTACLE - UP

18" A.F.F., UNO

125V/20A L5-20R "TWIST-LOCK"

RECEPTACLE - CELING MOUNTED

PN

L-

PN

L-

2.

5T

/9 kW

SP

VA

C 2.

5T /9 kW

SP

VA

C

D

PB

1-

,1 5, 2-8

1-2

1-1

1-1, b

1-1, b

1-1, b

1-1, b

1-1, b

2-1, c ab b a

1-1

2-1

2-1, a

2-1, a

2-1, a

2-1, a

1-3 1-3 1-3 1-3

2- 1, a S

/L

1-10 1-10

1-

1-

1-12

1-1

1-1

1-

1-

1-

2-2

2-

2-52-5

2-10

2-

2-6

2-52-52-8 2-8

1-19

1-20

1-20 1-23 1-23 1-23

2-182-18

2-18

2-18

E2.1

Typ

2-1, c

2-1, c

1-2

1-

2-8

2-

2-3

2-7

2-9

2-11

1-18

1-7

PANEL #1

125 AMP MCB

120/208V THREE PHASE

30 SPACE PANEL

2" DIA. EMT CONDUIT; FACTORY-

INSTALLED TO BELOW FLOOR

#4 CU AWG THWN GROUND WIRE;

BOLTED TO STEEL FRAME; FRAME TO

BE GROUNDED TO GROUNDING LUG

BY ELECTRICAL CONTRACTOR

ON SITE PER CONTRACTUAL AGREEMENT

PANEL #2

100 AMP MCB

120/208V THREE PHASE

30 SPACE PANEL

2" DIA. EMT CONDUIT; FACTORY-

INSTALLED TO BELOW FLOOR

(4) 2/0 CU AWG THWN WIRES WITH #4 CU GROUND WIRE

IN A 2" DIA EMT CONDUIT; FIELD-

PROVIDED AND INSTALLED BY ELECTRICAL CONTRACTOR

PIN AND SLEEVE RECEPTACLE w/

30° ANGLE COVER PLATE, AND

BACK BOX; INSTALLED IN FACTORY

2" EMT CONDUIT; INSTALLED

BY FACTORY

2" LL CONDUIT BODY;

INSTALLED BY FACTORY

(4) 2/0 THWN CU WIRES w/

(1) #4 AWG THWN CU GROUND WIRE

INSTALLED IN CONDUIT BY FACTORY

FACTORY-INSTALLED

SERVICE ENTRANCE

CONDUIT

COUPLING AND CONDUIT

TO BE PROVIDED AND

INSTALLED BY CERTIFIED

INSTALLER

FACTORY-INSTALLED

THWN GROUND WIRE

FACTORY-INSTALLED

CONDUIT SLEEVE FOR

GROUND WIRE

MECHANICAL TWO-

CONDUCTOR GROUNDING

LUG FASTENED TO STEEL

FRAME OF MODULE w/ SELF-

DRILLING SCREW

FACTORY-INSTALLED

THWN GROUND WIRE

CONNECTED TO

GROUNDING LUG

BY FACTORY

THWN GROUND WIRE TO

GROUND ELECTRODE;

GROUND WIRE AND

GROUND ELECTRODE

PROVIDED AND INSTALLED

BY CERTIFIED INSTALLER

NOTE:

SET SCREWS FOR GROUNDING LUG

TO BE TORQUED PER ANNEX I OF

THE NATIONAL ELECTRICAL CODE

DATA PULL BOX

4" DIA. EMT CONDUIT

4" LB CONDUIT

BODY

EXTERIOR WALL

4" EMT IN CEILING CAVITY;

STUB INTO STRUCTURE 9" MIN.

4" EMT PUSH-ON BUSHING

MIN

9"

1st- floor12 1st- w alls- columns24 1st- flel- drs10 1st- flel9 1st-flme- p11 1st- walls23 common27 1st-common1 1st- floor- dim130 0

Drawn By: Serial No.

Page No.

Scale:

THIS DRAWING AND ALL INFORMATION

CONTAINED HEREON IS THE

PROPERTY OF WHITLEY MFG. CO. INC.,

AND IS NOT TO BE REPRODUCED

WITHOUT THE EXPRESS PERMISSION

OF WHITLEY MFG. CO., INC.

WHITLEY MFG. CO. INC., ASSUMES NO

RESPONSIBILITY FOR UNAUTHORIZED

USE OF THIS DRAWING.

Quote No.

Model No.

Job No.

Date:

Rev:

Checked By:

No. Description Date Whitley East, LLC

64 HESS ROAD

LEOLA, PA 17540

PHONE: 717.656.2081

www.whitleyman.com

C U

ST

O

M

ER

A

PP

R O

VA

L

SE

T

6/

/2

7:

:4

AM

As indicated

6/30/2022

7:00:42 AM

E2.12022-072-WP

EP 2696-97

49675-99

DL/CZ

(2) 10'-0" x 52'-0" MODULES

ELECTRICAL PLAN

SUSTAINABLE MODULAR MANAGEMENT

NAVAL UNDERSEA WARFARE CENTER

3/8" = 1'-0"1 Electrical Plan

1" = 1'-0"3…