QA-1_N4008422Q0004_AMD-01.pdf

N4008422Q0004

No. Date Questions (Should include Specification Section or Drawing Reference) Answers

1 QA-1

2/23/2022

ATTACHMENT 1:

DELIVERY, INSPECTION, AND ACCEPTANCE

(2) Date.

Please accept the extension of delivery date within 430 calendar days after contract is issued.

430 Calendar Days is unacceptable; Please stay within 365 calendar days.

See revised specification issued via Amendment 0001.

2 QA-1

2/23/2022

ATTACHMENT 1:

MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS

(5) Rustproofing and Undercoating.

Please confirm that offeror is not required to offer with following points of additional rustproof coating;

-on the roof of base vehicle -on the whole part of body/aerial platform -inside of door -around hinges

If you required above, please clarify exact location of Rustproofing and Undercoating.

Undercoating is required in and around under vehicle areas such drivetrain, axle mounts leaf spring mounts, and frame rails, bottom chassis areas. Rustproofing paint or Specialized corrosion resistance paint on all Boom attachments and exterior working platform areas. Cab rook and drip rails.

3 QA-1

2/23/2022

ATTACHMENT 1:

MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS

(5) Rustproofing and Undercoating.

Please clarify that offeror must offer following points for your required "optional coating";

-tilt cab -front grille

Same as comments above, #2.

4 QA-1

2/23/2022

ATTACHMENT 1:

MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS

(5) Rustproofing and Undercoating.

Do we correctly understand your meant "certifications" is certificate of application of rustproof (防錆塗装の施工証明書)?

Additional certification to include GOJ Safety Requirements for Electrical/Aerial trucks Insulated boom areas, and grounding. Certified capacity for personnel.

5 QA-1

2/23/2022

ATTACHMENT 1:

MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS

(14) Boom and Control Device:

Please modify the description as following:

The 3rd / top boom shall be FRP or FRP coating (insulation voltage 100kV/5min) and automated boom storage / vertical / horizontal control.

According to manufacturer, The 3rd / top boom is made of FRP and FRP material is superior to FRP coating in the point of view of function.

This would be fine, as long it still meets GOJ Industry Safety Standards on Electrical Service vehicles or equipment.

See revised specification issued via Amendment 0001.

QUESTION & ANSWER #1

FOR

N4008422Q0004

FY22 PROCUREMENT OF A TRUCK, AERIAL PLATFORM FOR NAVFAC FE, OKINAWA