Attachment 1 Specification-N4008422Q0004_08FEB2022.pdf
PDF 224 KB Posted
- Attached to
- Solicitation for N4008422Q0004, FY22 PROCUREMENT OF A TRUCK, AERIAL PLATFORM FOR NAVFAC FE
- Solicitation number
- N4008422Q0004
View the file
Other files
| File | Type | Posted |
|---|---|---|
| N4008422Q0004-Amendment-0001.pdf | ||
| Attachment 1_Specification_REV1_23February2022.pdf | ||
| QA-1_N4008422Q0004_AMD-01.pdf | ||
| N4008422Q0004 RFQ.pdf | ||
| Attachment 2_Question and Answer Form-N4008422Q0004.xlsx | XLSX spreadsheet | |
| Attachment_3_PIEE_Solicitation_Module.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
N4008422Q0004 Attachment 1
08 February 2022
ATTACHMENT 1:
SPECIFICATION - MANDATORY CHARACTERISTICS For Each Item Being Purchased Under this
Solicitation.
Deviations from the minimum mandatory requirements specified in Attachment 1: Specification – Mandatory Characteristics are NOT allowed for each item being purchased under this solicitation and will be determined nonresponsive and not eligible for award.
ITEM 0001, TRUCK AERIAL PLATFORM
GENERAL DESCRIPTION
Truck, maintenance, aerial servicing, insulated bucket and boom for high voltage electrical work, 360 degree rotation, 4x2, right hand drive, and air conditioner. Offerors Proposed Vehicle for Item 0001 meets the General Description provided. YES NO
All vehicles shall be the newest model and year at the time of delivery and ready for use. Offerors Proposed Vehicle for Item 0001 will be the newest model and year at the time of delivery and ready for use.
YES NO
Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standards, including, but not limited to, exhaust emission control requirement, in effect on the date of manufacture. OFFEROR AGREES: YES NO
MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS
(1) Quantity One (1) each. E/C 0725-RH OFFEROR AGREES: YES NO
(2) Minimum Dimensions (Metric/Inches).
Millimeter Inches OFFEROR’S PROPOSED
VEHICLE DIMENSIONS &
LOADING CAPACITY
(*To be inserted by offeror.)
Boom and Bucket Section Maximum Working Height for Bucket 14,500 570.9 *___________mm
Maximum Working Radius Boom
10,500
413.4
* mm
Loading Capacity of Bucket 200 Kg 441 lbs. * Kg
(3) Exterior Color. Manufacturer's standard. OFFEROR AGREES: YES NO
(4) Identification Markings and Registration Numbers. Reflective tape dark blue color, and marked on the applicable vehicle license plate. The United States Navy Registration Number 96-54024 is applied.
The contractor shall install locally manufactured license plate both front and rear of each vehicle, plates will be standard 6X12 inches, navy blue lettering on white background. Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 1/2-inch letters (minimum) centered between the bottom holes. Both front and rear license plates are required. OFFEROR AGREES: YES NO
(5) Rustproofing and Undercoating. Manufacture shall applied optional undercoating with certifications to be suitable to Okinawa area. OFFEROR AGREES: YES NO
(6) Engine Displacement. Manufacturer’s standard. OFFEROR AGREES: YES NO
(7) Seat Belts. Shall be installed on all passenger and driver seats.
OFFEROR AGREES: YES NO
(8) Transmission System. Manufacturer’s standard. OFFEROR AGREES: YES NO
(9) Tires. Manufacturer’s standard. OFFEROR AGREES: YES NO
(10) AM or AM/FM Radio with Speaker. OFFEROR AGREES: YES NO
(11) Back Eye Camera with Monitor. OFFEROR AGREES: YES NO
(12) Suspension. Manufacturer's standard. OFFEROR AGREES: YES NO
(13) Electrical System. Manufacturer's standard. OFFEROR AGREES: YES NO
(14) Boom and Control Device: The 3rd / top boom shall have FRP coating (insulation voltage 100kV/5min) and automated boom storage / vertical / horizontal control.
OFFEROR AGREES: YES NO
(15) Bucket: Insulated slide / elevation type (insulation voltage, 20kV/5min).
OFFEROR AGREES: YES NO
(16) Lighting System: Shall be installed control panel lighting system for basket and chassis. Working light(s) shall be installed around boom. OFFEROR AGREES: YES NO
(17) Out Rigger (Jack): Shall be installed 4 each with automatic level control unit and warning lamps shall have top of the out riggers. OFFEROR AGREES: YES NO
(18) Power Source for Hydraulic: Manufacture’s standard. OFFEROR AGREES: YES NO
(19) Safety Device: Manufacturer’s standard. OFFEROR AGREES: YES NO
OTHER MISCELLANEOUS REQUIREMENTS
(1) Accessories Note: Shall be type installed on manufacturer's standard production model.
a. Floor Mats. Manufacturer’s standard. OFFEROR AGREES: YES NO
b. Triangle Reflector. OFFEROR AGREES: YES NO
c. Storage Box: Manufacturer’s standard design, minimum 1,500mm width x 500mm height shall be installed on 1 each for right side and 1 each for left sides of rear chassis.
OFFEROR AGREES: YES NO
(2) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer and the garage or maintenance dealer(s) shall be within a 100-kilometer radius of the delivery point. Warranty service must be provided in the Okinawa area. OFFEROR AGREES: YES NO
The following dealer(s) will provide the warranty work.
a. For Okinawa area:
Name of Firm: *_________________________________________________
Address: *______________________________________________________
Telephone No.: *________________________________________________
(*) to be inserted by contractor.
(3) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at time of vehicle(s) delivery. OFFEROR AGREES: YES NO
(4) Technical Publication (In Japanese and CD or CD ROM is acceptable): One (1) set of operator manual for each vehicle. If available, one (1) set of technical (shop repair) manual and one (1) set of parts catalog to be furnished for consignee by Contractor at the time of vehicle(s) delivery. If the technical (shop repair) manual and the parts catalog are not available, the contractor has responsibility to provide all necessary services and information for in-house maintenance as equivalent to the technical (shop repair) manual and the parts catalog and the point of contact to include location, name, telephone number and email address. Especially, the contractor shall immediately provide repair procedures and related parts description, parts numbers and parts diagrams of the repairs in-question by FAX, e-mail attachments or hand carried copies anytime as the Government requested.
OFFEROR AGREES: YES NO
DELIVERY, INSPECTION, AND ACCEPTANCE
(1) Location. All transportation charges borne by the contractor to the NAVFACFE, Transportation, Okinawa detachment, Bldg.3571 (P.O.C is Ms. Hokama rei.hokama.JA@fe.navy.mil).
OFFEROR AGREES: YES NO
(2) Date. The vehicle shall be delivered at the delivery point specified above within 300 calendar days after contract is issued. OFFEROR AGREES: YES NO
(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified. OFFEROR AGREES: YES NO mailto:rei.hokama.JA@fe.navy.mil
| ATTACHMENT 1: |
| SPECIFICATION - MANDATORY CHARACTERISTICS For Each Item Being Purchased Under this Solicitation. |
| ITEM 0001, TRUCK AERIAL PLATFORM |
| GENERAL DESCRIPTION |
| (3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery... |
File details come from the government source that posted it. Updated .