AMENDMENT 0004_N4008421T0016.pdf
PDF 17 KB Posted
- Solicitation number
- N4008421T0016
About this file
This document provides an amendment to a solicitation for the procurement of a fire pumper for the Fire Department at Commander Fleet Activities Sasebo in Japan.
The amendment revises specifications for weight rating and distribution, front bumper requirements, cab heating and air conditioning features, water tank access, and adds a requirement for warranty work to be provided in Japan with government quality assurance. Responses to the solicitation, number N4008421T0016, are due by 14:30 Japan Standard Time on August 2, 2021, with all other terms and conditions remaining unchanged. The solicitation is issued by the Naval Facilities Engineering Command for a fire pumper to be delivered to Commander Navy Region Japan.
View the file
Other files
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Subj: REQUEST FOR QUOTATION NO. N4008421T0016 FY21 PROCUREMENT OF A
FIRE PUMPER FOR FIRE DEPARTMENT, SASEBO, CNRJ
Combined Synopsis/Solicitation N4008421T0016
AMENDMENT 0004
1. The purpose of this amendment is to:
a. Replace N4008421T0016_Revised Attachment 1: Specification_23Jul2021 with
N4008421T0016_Revised Attachment 1: Specification_30Jul2021.
The following changes are made to the specification:
Item 11. WEIGHT RATING AND DISTRIBUTION (page 6)
FROM:
The manufacturer’s GVW rating for the fire truck chassis furnishing shall not exceed the manufacturer’s GVW rating when fully equipped as specified herein, the test and evaluation including all specified firefighting equipment, serviced with fuel, water, any lubricants, loaded with 750 gallons of water in the water tank, minimum of 40 gallons of foam in the foam tank, a 1,200 lbs. simulated load uniformly distributed in the main hose bed, crew of firefighters in cab weighing not less than 165 lbs. each or equivalent deadweight. Weight distribution ration between the front and rear axle is as such as to ensure positive traction at the rear wheels and positive steering at the front wheels under all operating conditions specified herein. The percentage of GVW at front axle is not less than 25 percent, no more than 35 percent for 4X2.
TO:
The manufacturer’s GVW rating for the fire truck chassis furnishing shall not exceed the manufacturer’s GVW rating when fully equipped as specified herein, the test and evaluation including all specified firefighting equipment, serviced with fuel, water, any lubricants, loaded with 750 gallons of water in the water tank, minimum of 40 gallons of foam in the foam tank, a 1,200 lbs. simulated load uniformly distributed in the main hose bed, crew of firefighters in cab weighing not less than 165 lbs. each or equivalent deadweight. Weight distribution ration between the front and rear axle is as such as to ensure positive traction at the rear wheels and positive steering at the front wheels under all operating conditions specified herein. The percentage of GVW at front axle is not less than 25 percent, no more than 40 percent for 4X2.
Item 37. FRONT BUMPER AND TOWING DEVICE (page 12)
FROM:
A heavy duty, full width, front bumper with a minimum of (1) tow hook provided at the front of the truck rated at 9000 lbs. The tow hooks have to be exposed for easy access.
Bumper has to have steps for the Engineer to stand on. The entire front bumper shall be covered with prismatic reflective film, lime yellow/red reflective chevron striping.
Striping is placed at a 45 degree slant.
TO:
The entire front bumper shall be covered with prismatic reflective film, lime yellow/red reflective chevron striping. Striping is placed at a 45 degree slant.
Item 44. HEATER, DEFROSTER AND AIR CONDITIONER, paragraph b. (page 15)
The cab is provided with the maker’s standard commercially available, air conditioner.
Controls are mounted on a suitable place in the cab. Provide individual control for front and rear of the cab with additional air outlets in the rear cab because of the hot humid summers in Japan.
TO:
The cab is provided with the maker’s standard commercially available, air conditioner.
Controls are mounted on a suitable place in the cab. With air outlets in the front and rear cab because of the hot humid summers in Japan.
Item 59. TANK FILLER OPENING (page 21)
The tank shall have an accessibly located manhole minimum of 12 inch (305mm) in diameter and provided with a tight, gasket, hinged manhole cover having a hold down catch. A water tank cover that is hinged but not latched is acceptable. The tank manhole shall not project above the height of the body side sheet metal and shall have an engraved metal label attached stating “Water Only”.
TO:
The tank shall have an accessibly located manhole minimum of 12 inch (305mm) in diameter and provided with a tight, gasket, hinged manhole cover. A water tank cover that is hinged but not latched is acceptable. The tank manhole shall not project above the height of the body side sheet metal and shall have an engraved metal label attached stating “Water Only”.
Item G. WARRANTY (page 33) The following is added:
Warranty work will be provided in Japan, with Government personnel providing quality assurance of all work.
Name of Firm:*_________________________ Address:*______________________________ Telephone No.:*_________________________ (*) to be inserted by contractor.
2. The requested response date/time of Monday, 02 August 2021 by 14:30 Japan Standard Time
(UTC + 9 hours) remains unchanged.
3. All other terms and conditions remain unchanged.
File details come from the government source that posted it. Updated .