012-0200000-07_ELINs_ISWM_GwYsk_Revised-nB.PDF

Provide Prices For Integrated Solid Waste Management (ISWM) Services - Recurring - In Accordance With Section C, Spec Item 3

ELIN /Sub

ELIN

Description Quantity Unit of Issue

Unit Price Total CAC

Integrated Solid Waste Management Services, Spec Item 3

A001 CNIC 1 LO ¥ ¥ -$

A002 DECA 1 LO ¥ ¥ -$

A003 DLA 1 LO ¥ ¥ -$

A004 DoDEA 1 LO ¥ ¥ -$

A005 HSG 1 LO ¥ ¥ -$

A006 SRF 1 LO ¥ ¥ -$

A007 USNH 1 LO ¥ ¥ -$

TOTAL RECURRING PRICE LINE ITEM-0001 111.1542¥ ¥ -$

LO = Lot

ATTACHMENT J-0200000-07

EXHIBIT LINE ITEM NUMBERS

SOLICITATION/CONTRACT #

EXHIBIT A - CLIN 9000

Line Item 0001 Recurring - Base Period

ELINs A001 through A007

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

UNCLASSIFIED // FOR OFFICIAL USE ONLY [WHEN FILLED]

ELIN Short Decription Description Extended Estimated Quantity

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

A700 Combustible General Waste Segregatio, Tranceportation and Disposal for Yokosuka City A700AA Additional Segregation

Work The Contractor shall perform additional segregation work of all combustible waste comply with Yokosuka City Incinerator Plant acceptance standard.

10 WK ¥ ¥ 9230

A700AB Combustible Solid Waste Tranceportation and Disposal Fee at Yokosuka City Incinerator Plant

The Contractor shall load, transport of all comply with Yokosuka city incinerator plant acceptance standard combustible solid waste to Yokosuka City Incinerator Plant for disposal during Not operational service of the CFAY Yokosuka solid waste incinerator plant (Bldg.

1829). This service include Yokosuka City Incinerator Plant disposal fee (150 yen for every 10 kilograms).

12,000 10 Kg ¥ ¥ 9230

A701 Home Appliance Disposal (These following ELINs include transportation cost and disposal fee by manufacture.)

A701AA Air Conditiner The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

100 EA ¥ ¥ 9230

A701AB Televisioin (Small: under 15 inch)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

200 EA ¥ ¥ 9230

A701AC Televisioin (Large: over 16 inch)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

500 EA ¥ ¥ 9230

A701AD Refrigerator (Small: under 170 liter)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

250 EA ¥ ¥ 9230

A701AE Refrigerator (Large: over 171 liter)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

100 EA ¥ ¥ 9230

A701AF Washing Machine/ Clothes Dryer

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

100 EA ¥ ¥ 9230

ELINs A700 through A705

ATTACHMENT J-0200000-07

EXHIBIT LINE ITEM NUMBERS

SOLICITATION/CONTRACT #

EXHIBIT A - CLIN 9000

Line Item 0002 Non-Recurring - Base Period Provide Prices For Integrated Solid Waste Management (ISWM) Services - Non-Recurring Price - In Accordance With Section C, Spec Item 4

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

A702 Solid Waste Collection Service and Set Up Solid Waste Containers A702AA Set Up and Removal Service of Solid Waste 10 Cubic Meter Dumpster

The Contractor shall perform set up of solid waste one (1) EA 10 CM dumpster to designated locations and removal of the dumpster include once collection solid waste from the container to empty, and segregation service for collected solid waste.

200 UN ¥ ¥ 9230

A702AB Set Up and Removal Service of Solid Waste Segregation type Bin

The Contractor shall perform set up of solid waste one (1) EA Segregation type Bin to designated locations and removal of the bin include once collection solid waste from the container to empty and segregation service for collected solid waste.

100 UN ¥ ¥ 9230

A702AC Set Up and Removal Service of Solid Waste 32/50 Gallon Container

The Contractor shall perform set up of solid waste one (1) EA 32/50 gallon container to designated locations and removal of the container include once collection solid waste from the container to empty, and segregation service for collected solid waste.

1,000 UN ¥ ¥ 9230

A702AD Solid Waste Collection Service from 10 Cubic Meter Dumpster

The Contractor shall perform collection service of solid waste from one

(1) EA 10 cubic meter dumpster to be empty at designated locations and segregation service of collected solid waste.

200 EA ¥ ¥ 9230

A702AE Solid Waste Collection Service from Segregation type Bin or 32/50 Gallon Container

The Contractor shall perform collection service of solid waste from one

(1) EA solid waste Segregation type Bin or 32/50 Gallon Container to be empty at designated locations and segregation service of collected solid waste.

1,000 EA ¥ ¥ 9230

A702AF Solid Waste Collection Service of Contain in Tri- Wall Box

The Contractor shall perform collection solid waste service contain one

(1) EA Tri-wall box at designated locations and segregation service of collected solid waste, the size up to 1.3 cubic meter.

1,500 EA ¥ ¥ 9230

A702AG Solid Waste Collection Service of Expired Food or Beverage (Perishable)

The Contractor shall provide collection services of Expired Food or Beverage (Perishable) may including of organic sludge, oil, alkaline/acid solution and glass/ceramic debris, metal scrap, waste plastic kind, wood (product/transportation package) general and/or industrial wastes, unit weight up to 200 Kg from designated pickup points to loading to waste container or transportation vehicle, horizontal distance up to 12 meter and segregation service of collected solid waste. The Contractor shall segregation of collected waste at Material Recovery Facility (Bldg.

5004), combustible waste dispose to CFAY Yokosuka solid waste incinerator plant (Bldg. 1829) and industrial waste to ensure compliance with all applicable local, prefectural, Japanese Government laws and regulation.

50 UN ¥ ¥ 9230

A702AH Solid Waste Collection Service of Bulky Waste

This work will be ordered when the quantity of unscheduled service from the recurring work portion exceeds 500 tons per year. The Contractor shall perform unschedule collection solid waste service of the exceeded recurring work amount of bulky waste.

10 TN ¥ ¥ 9230

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

A703 Daily Inspection and Report Services A703AA Daily Inspection and Report

Services of Solid Waste Volume in Containers

The Contractor shall accomplish daily inspection and report the percent (%) volume of solid waste in containers, (a) Bin and (b) Dumpster, in all areas, during contractor waste collection schedule. The Contractor shall inspect the approximate solid waste volume (i.e., 25%, 50%, 75% and 100%) of every container for a period of 30 continuous days or one month, and then submit a written report to the Government Requester or

COR.

3 UN ¥ ¥ 9230

A703AB Inspection and Report Services of Damper on the Solid Waste Containers

The Contractor shall perform inspection of the gas compressed damper installed on the covers of all containers under this contract to make sure that gas damper is operational and report services, and then submit a written report to the Government Requester.

2 TM ¥ ¥ 9230

A704 Transport, Collection and Loading Service of Waste.

A704AA Transport the Accumulated

Combustible Waste to the Trash Pit

The Contractor shall transport, load and un-load the accumulated combustible waste from around Building# 1829 to the trash pit. The service include load and unload service of the accumulated combustible waste for transportation.

200 TN ¥ ¥ 9230

A704AB Short Range Transport, Collection and Loading Service of Solid Waste by Loading Heavy Equipment

The Contractor shall provide loading heavy equipment lease with operation for the transport, collection and loading service of solid waste to Goverment owned solid waste container or transportation vehicle from designated pickup points. The Contractor shall perform transport, collection and loading services with loading heavy equipment whenever the Government requests as above items 701 or 702. The loading heavy equipment of standard bucket capacity, up to 0.1 Cubic Meter.

10 DA ¥ ¥ 9230

A704AC Short Range Transport, Collection and Loading Service of Solid Waste by Forklift

The Contractor shall provide forklift lease with operation for the transport, collection and loading service of solid waste to Goverment owned solid waste container or transportation vehicle from designated pickup points. The Contractor shall perform transport, collection and loading services with forklift whenever the Government requests as above items 701 or 702. The forklift of Rated loading weight, up to 2.0 ton.

10 DA ¥ ¥ 9230

A704AD Short Range Transport, Collection and Loading Service of Solid Waste by Man Hour Labor

The Contractor shall provide labor for the transport, collection and loading service of solid waste to Goverment owned solid waste container or transportation vehicle from designated pickup points. The Contractor shall perform transport, collection and loading services by labor whenever the Government requests as above items 701 or 702.

120 HR ¥ ¥ 9230

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

A705 Repair of Solid Waste Storage Container A705AA Replace Gas Damper of 10

Cubic Meter Dumpster The Contractor shall replace gas damper of lid with new one on 10 cubic meter dumpster. The Contractor shall also replace damaged or missing steel brackets of gas damper, including painting of new and affected areas. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

200 EA ¥ ¥

A705AB Replace Door Hinge of 10 Cubic Meter Dumpster

The Contractor shall replace door hinge which consists of three (3) steel plate hinges and one (1) steel pin, with new ones, including painting of new and affected areas. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

20 EA ¥ ¥

A705AC Replace Container Handle and Dead Bolt of 10 Cubic Meter Dumpster

The Contractor shall replace container handle and dead bolt with new ones of 10 cubic meter dumpster. The Contractor shall also replace steel bands and top/bottom steel latches for steel pin, and steel latch for handle, including painting of new and affected area. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

20 EA ¥ ¥

A705AD Replace Container Handle of 10 Cubic Meter Dumpster

The Contractor shall replace container handle with new one. The Contractor shall also replace damaged or missing steel latch for handle, including painting of new and affected area. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

20 EA ¥ ¥

A705AE Replace Gas Damper of 24 Cubic Meter Dumpster

The Contractor shall replace gas damper of Container top with new one of 24 cubic meter dumpster. The Contractor shall also replace damaged or missing steel brackets of gas damper, including painting of new and affected area. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

8 EA ¥ ¥

A705AF Replace Container Top of 24 Cubic Meter Dumpster

The Contractor shall replace container top which consists of vinyl coated canvas fabric sheet and rope fasteners, with new ones of 24 cubic meter dumpster. The size approximately 6610 mm x 2580 mm x 260 mm.

Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

2 EA ¥ ¥

A705AG Small size Patch Repair Service of Torn/Damaged Vinyl Coated Canvas Fabric Sheet of Container Top on 24 Cubic Meter Dumpster.

The Contractor shall cut and remove torn/damaged area of container top, and patch it up with same materials, in accordance with manufacturer’s repair manual of 24 cubic meter Dumpster. The patch repair size, up to 500 mm x 500 mm. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

2 EA ¥ ¥

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

A705AH Medium size Patch Repair Service of Torn/Damaged Vinyl Coated Canvas Fabric Sheet of Container Top on 24 Cubic Meter Dumpster.

The Contractor shall cut and remove torn/damaged area of container top, and patch it up with same materials, in accordance with manufacturer’s repair manual of 24 cubic meter dumpster. The patch repair size, up to 1000 mm x 1000 mm. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

2 EA ¥ ¥

A705AI Replace Bottom Roller of the 10 Cubic Meter Dumpster.

The Contractor shall replace service of bottom roller with new one of 10 cubic meter dumpster. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

10 EA ¥ ¥

A705AJ Replace Bottom Leg of the 10 Cubic Meter Dumpster

The Contractor shall replace bottom leg with new one of 10 cubic meter dumpster, including painting of new and affected area. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

10 EA ¥ ¥

A705AK Replace Bottom Rails and Floor Metal of the 10 Cubic Meter Dumpster

The Contractor shall replace bottom rails and floor metal with new one of 10 cubic meter dumpster, including painting of new and affected area.

Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

2 EA ¥ ¥

A705AL Install Gas Damper of Segregation Type Bin

The Contractor shall install gas damper of lid with new one of segregation type bin. The Contractor shall also paint affected areas.

Install/Repair portions of solid waste containers sketches are shown on J- 1503030-08.

25 EA ¥ ¥

A705AM Replace Gas Damper of Segregation Type Bin

The Contractor shall replace gas damper of lid with new one of segregation type bin. The Contractor shall also replace damaged or missing steel brackets of gas damper, including painting of new and affected areas. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

100 EA ¥ ¥

A705AN Replace Lid Hinge of 10 Cubic Meter Dumpster

The Contractor shall replace lid hinges with new ones, including painting of new and affected areas of 10 cubic meter dumpster. The quantities of lid hinges are three (3). Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

20 EA ¥ ¥

A705AO Replace Lid Lock of 10 Cubic Meter Dumpster

The Contractor shall replace lid locks with new ones, including painting of new and affected areas of 10 cubic meter dumpster. The quantities of lid locks are two (2). Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

20 EA ¥ ¥

HR = Hour EA = Each DA = Day

C = Cubic TN = Ton UN = Unit M = Meter TM = Time

TOTAL NON-RECURRING PRICE LINE ITEM-0002

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Provide Prices For Integrated Solid Waste Management (ISWM) Services - Recurring - In Accordance With Section C, Spec Item 3

ELIN

Description Quantity Unit of Issue

Unit Price Total CAC

Integrated Solid Waste Management Services, Spec Item 3

B001 CNIC 1 LO ¥ ¥ -$

B002 DECA 1 LO ¥ ¥ -$

B003 DLA 1 LO ¥ ¥ -$

B004 DoDEA 1 LO ¥ ¥ -$

B005 HSG 1 LO ¥ ¥ -$

B006 SRF 1 LO ¥ ¥ -$

B007 USNH 1 LO ¥ ¥ -$

TOTAL RECURRING PRICE LINE ITEM-0003 111.1542¥ ¥ -$

LO = Lot

ELINs B001 through B007

ATTACHMENT J-0200000-07

EXHIBIT LINE ITEM NUMBERS

SOLICITATION/CONTRACT #

EXHIBIT B - CLIN 9001

Line Item 0003 Recurring - First Option Period

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

B700 Combustible General Waste Segregatio, Tranceportation and Disposal for Yokosuka City B700AA Additional Segregation

Work The Contractor shall perform additional segregation work of all combustible waste comply with Yokosuka City Incinerator Plant acceptance standard.

10 WK ¥ ¥ 9230

B700AB Combustible Solid Waste Tranceportation and Disposal Fee at Yokosuka City Incinerator Plant

The Contractor shall load, transport of all comply with Yokosuka city incinerator plant acceptance standard combustible solid waste to Yokosuka City Incinerator Plant for disposal during Not operational service of the CFAY Yokosuka solid waste incinerator plant (Bldg.

1829). This service include Yokosuka City Incinerator Plant disposal fee (150 yen for every 10 kilograms).

12,000 10 Kg ¥ ¥ 9230

B701 Home Appliance Disposal (These following ELINs include transportation cost and disposal fee by manufacture.)

B701AA Air Conditiner The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

100 EA ¥ ¥ 9230

B701AB Televisioin (Small: under 15 inch)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

200 EA ¥ ¥ 9230

B701AC Televisioin (Large: over 16 inch)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

500 EA ¥ ¥ 9230

B701AD Refrigerator (Small: under 170 liter)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

250 EA ¥ ¥ 9230

B701AE Refrigerator (Large: over 171 liter)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

100 EA ¥ ¥ 9230

B701AF Washing Machine/ Clothes Dryer

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

100 EA ¥ ¥ 9230

ELINs B700 through B705

ATTACHMENT J-0200000-07

EXHIBIT LINE ITEM NUMBERS

SOLICITATION/CONTRACT #

EXHIBIT B - CLIN 9001

Line Item 0004 Non-Recurring - First Option Period Provide Prices For Integrated Solid Waste Management (ISWM) Services - Non-Recurring Price - In Accordance With Section C, Spec Item 4

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

B702 Solid Waste Collection Service and Set Up Solid Waste Containers B702AA Set Up and Removal Service of Solid Waste 10 Cubic Meter Dumpster

The Contractor shall perform set up of solid waste one (1) EA 10 CM dumpster to designated locations and removal of the dumpster include once collection solid waste from the container to empty, and segregation service for collected solid waste.

200 UN ¥ ¥ 9230

B702AB Set Up and Removal Service of Solid Waste Segregation type Bin

The Contractor shall perform set up of solid waste one (1) EA Segregation type Bin to designated locations and removal of the bin include once collection solid waste from the container to empty and segregation service for collected solid waste.

100 UN ¥ ¥ 9230

B702AC Set Up and Removal Service of Solid Waste 32/50 Gallon Container

The Contractor shall perform set up of solid waste one (1) EA 32/50 gallon container to designated locations and removal of the container include once collection solid waste from the container to empty, and segregation service for collected solid waste.

1,000 UN ¥ ¥ 9230

B702AD Solid Waste Collection Service from 10 Cubic Meter Dumpster

The Contractor shall perform collection service of solid waste from one

(1) EA 10 cubic meter dumpster to be empty at designated locations and segregation service of collected solid waste.

200 EA ¥ ¥ 9230

B702AE Solid Waste Collection Service from Segregation type Bin or 32/50 Gallon Container

The Contractor shall perform collection service of solid waste from one

(1) EA solid waste Segregation type Bin or 32/50 Gallon Container to be empty at designated locations and segregation service of collected solid waste.

1,000 EA ¥ ¥ 9230

B702AF Solid Waste Collection Service of Contain in Tri- Wall Box

The Contractor shall perform collection solid waste service contain one

(1) EA Tri-wall box at designated locations and segregation service of collected solid waste, the size up to 1.3 cubic meter.

1,500 EA ¥ ¥ 9230

B702AG Solid Waste Collection Service of Expired Food or Beverage (Perishable)

The Contractor shall provide collection services of Expired Food or Beverage (Perishable) may including of organic sludge, oil, alkaline/acid solution and glass/ceramic debris, metal scrap, waste plastic kind, wood (product/transportation package) general and/or industrial wastes, unit weight up to 200 Kg from designated pickup points to loading to waste container or transportation vehicle, horizontal distance up to 12 meter and segregation service of collected solid waste. The Contractor shall segregation of collected waste at Material Recovery Facility (Bldg.

5004), combustible waste dispose to CFAY Yokosuka solid waste incinerator plant (Bldg. 1829) and industrial waste to ensure compliance with all applicable local, prefectural, Japanese Government laws and regulation.

50 UN ¥ ¥ 9230

B702AH Solid Waste Collection Service of Bulky Waste

This work will be ordered when the quantity of unscheduled service from the recurring work portion exceeds 500 tons per year. The Contractor shall perform unschedule collection solid waste service of the exceeded recurring work amount of bulky waste.

10 TN ¥ ¥ 9230

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

B703 Daily Inspection and Report Services B703AA Daily Inspection and Report

Services of Solid Waste Volume in Containers

The Contractor shall accomplish daily inspection and report the percent (%) volume of solid waste in containers, (a) Bin and (b) Dumpster, in all areas, during contractor waste collection schedule. The Contractor shall inspect the approximate solid waste volume (i.e., 25%, 50%, 75% and 100%) of every container for a period of 30 continuous days or one month, and then submit a written report to the Government Requester or

COR.

3 UN ¥ ¥ 9230

B703AB Inspection and Report Services of Damper on the Solid Waste Containers

The Contractor shall perform inspection of the gas compressed damper installed on the covers of all containers under this contract to make sure that gas damper is operational and report services, and then submit a written report to the Government Requester.

2 TM ¥ ¥ 9230

B704 Transport, Collection and Loading Service of Waste.

B704AA Transport the Accumulated

Combustible Waste to the Trash Pit

The Contractor shall transport, load and un-load the accumulated combustible waste from around Building# 1829 to the trash pit. The service include load and unload service of the accumulated combustible waste for transportation.

200 TN ¥ ¥ 9230

B704AB Short Range Transport, Collection and Loading Service of Solid Waste by Loading Heavy Equipment

The Contractor shall provide loading heavy equipment lease with operation for the transport, collection and loading service of solid waste to Goverment owned solid waste container or transportation vehicle from designated pickup points. The Contractor shall perform transport, collection and loading services with loading heavy equipment whenever the Government requests as above items 701 or 702. The loading heavy equipment of standard bucket capacity, up to 0.1 Cubic Meter.

10 DA ¥ ¥ 9230

B704AC Short Range Transport, Collection and Loading Service of Solid Waste by Forklift

The Contractor shall provide forklift lease with operation for the transport, collection and loading service of solid waste to Goverment owned solid waste container or transportation vehicle from designated pickup points. The Contractor shall perform transport, collection and loading services with forklift whenever the Government requests as above items 701 or 702. The forklift of Rated loading weight, up to 2.0 ton.

10 DA ¥ ¥ 9230

B704AD Short Range Transport, Collection and Loading Service of Solid Waste by Man Hour Labor

The Contractor shall provide labor for the transport, collection and loading service of solid waste to Goverment owned solid waste container or transportation vehicle from designated pickup points. The Contractor shall perform transport, collection and loading services by labor whenever the Government requests as above items 701 or 702.

120 HR ¥ ¥ 9230

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

B705 Repair of Solid Waste Storage Container B705AA Replace Gas Damper of 10

Cubic Meter Dumpster The Contractor shall replace gas damper of lid with new one on 10 cubic meter dumpster. The Contractor shall also replace damaged or missing steel brackets of gas damper, including painting of new and affected areas. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

200 EA ¥ ¥

B705AB Replace Door Hinge of 10 Cubic Meter Dumpster

The Contractor shall replace door hinge which consists of three (3) steel plate hinges and one (1) steel pin, with new ones, including painting of new and affected areas. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

20 EA ¥ ¥

B705AC Replace Container Handle and Dead Bolt of 10 Cubic Meter Dumpster

The Contractor shall replace container handle and dead bolt with new ones of 10 cubic meter dumpster. The Contractor shall also replace steel bands and top/bottom steel latches for steel pin, and steel latch for handle, including painting of new and affected area. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

20 EA ¥ ¥

B705AD Replace Container Handle of 10 Cubic Meter Dumpster

The Contractor shall replace container handle with new one. The Contractor shall also replace damaged or missing steel latch for handle, including painting of new and affected area. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

20 EA ¥ ¥

B705AE Replace Gas Damper of 24 Cubic Meter Dumpster

The Contractor shall replace gas damper of Container top with new one of 24 cubic meter dumpster. The Contractor shall also replace damaged or missing steel brackets of gas damper, including painting of new and affected area. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

8 EA ¥ ¥

B705AF Replace Container Top of 24 Cubic Meter Dumpster

The Contractor shall replace container top which consists of vinyl coated canvas fabric sheet and rope fasteners, with new ones of 24 cubic meter dumpster. The size approximately 6610 mm x 2580 mm x 260 mm.

Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

2 EA ¥ ¥

B705AG Small size Patch Repair Service of Torn/Damaged Vinyl Coated Canvas Fabric Sheet of Container Top on 24 Cubic Meter Dumpster.

The Contractor shall cut and remove torn/damaged area of container top, and patch it up with same materials, in accordance with manufacturer’s repair manual of 24 cubic meter Dumpster. The patch repair size, up to 500 mm x 500 mm. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

2 EA ¥ ¥

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

B705AH Medium size Patch Repair Service of Torn/Damaged Vinyl Coated Canvas Fabric Sheet of Container Top on 24 Cubic Meter Dumpster.

The Contractor shall cut and remove torn/damaged area of container top, and patch it up with same materials, in accordance with manufacturer’s repair manual of 24 cubic meter dumpster. The patch repair size, up to 1000 mm x 1000 mm. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

2 EA ¥ ¥

B705AI Replace Bottom Roller of the 10 Cubic Meter Dumpster.

The Contractor shall replace service of bottom roller with new one of 10 cubic meter dumpster. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

10 EA ¥ ¥

B705AJ Replace Bottom Leg of the 10 Cubic Meter Dumpster

The Contractor shall replace bottom leg with new one of 10 cubic meter dumpster, including painting of new and affected area. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

10 EA ¥ ¥

B705AK Replace Bottom Rails and Floor Metal of the 10 Cubic Meter Dumpster

The Contractor shall replace bottom rails and floor metal with new one of 10 cubic meter dumpster, including painting of new and affected area.

Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

2 EA ¥ ¥

B705AL Install Gas Damper of Segregation Type Bin

The Contractor shall install gas damper of lid with new one of segregation type bin. The Contractor shall also paint affected areas.

Install/Repair portions of solid waste containers sketches are shown on J- 1503030-08.

25 EA ¥ ¥

B705AM Replace Gas Damper of Segregation Type Bin

The Contractor shall replace gas damper of lid with new one of segregation type bin. The Contractor shall also replace damaged or missing steel brackets of gas damper, including painting of new and affected areas. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

100 EA ¥ ¥

B705AN Replace Lid Hinge of 10 Cubic Meter Dumpster

The Contractor shall replace lid hinges with new ones, including painting of new and affected areas of 10 cubic meter dumpster. The quantities of lid hinges are three (3). Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

20 EA ¥ ¥

B705AO Replace Lid Lock of 10 Cubic Meter Dumpster

The Contractor shall replace lid locks with new ones, including painting of new and affected areas of 10 cubic meter dumpster. The quantities of lid locks are two (2). Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

20 EA ¥ ¥

HR = Hour EA = Each DA = Day

C = Cubic TN = Ton UN = Unit M = Meter TM = Time

TOTAL NON-RECURRING PRICE LINE ITEM-0004

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Provide Prices For Integrated Solid Waste Management (ISWM) Services - Recurring - In Accordance With Section C, Spec Item 3

ELIN

Description Quantity Unit of Issue

Unit Price Total CAC

Integrated Solid Waste Management Services, Spec Item 3

C001 CNIC 1 LO ¥ ¥ -$

C002 DECA 1 LO ¥ ¥ -$

C003 DLA 1 LO ¥ ¥ -$

C004 DoDEA 1 LO ¥ ¥ -$

C005 HSG 1 LO ¥ ¥ -$

C006 SRF 1 LO ¥ ¥ -$

C007 USNH 1 LO ¥ ¥ -$

TOTAL RECURRING PRICE LINE ITEM-0005 111.1542¥ ¥ -$

LO = Lot

Line Item 0005 Recurring - Second Option Period

ELINs C001 through C007

ATTACHMENT J-0200000-07

EXHIBIT LINE ITEM NUMBERS

SOLICITATION/CONTRACT #

EXHIBIT C - CLIN 9002

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

C700 Combustible General Waste Segregatio, Tranceportation and Disposal for Yokosuka City C700AA Additional Segregation

Work The Contractor shall perform additional segregation work of all combustible waste comply with Yokosuka City Incinerator Plant acceptance standard.

10 WK ¥ ¥ 9230

C700AB Combustible Solid Waste Tranceportation and Disposal Fee at Yokosuka City Incinerator Plant

The Contractor shall load, transport of all comply with Yokosuka city incinerator plant acceptance standard combustible solid waste to Yokosuka City Incinerator Plant for disposal during Not operational service of the CFAY Yokosuka solid waste incinerator plant (Bldg.

1829). This service include Yokosuka City Incinerator Plant disposal fee (150 yen for every 10 kilograms).

12,000 10 Kg ¥ ¥ 9230

C701 Home Appliance Disposal (These following ELINs include transportation cost and disposal fee by manufacture.)

C701AA Air Conditiner The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

100 EA ¥ ¥ 9230

C701AB Televisioin (Small: under 15 inch)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

200 EA ¥ ¥ 9230

C701AC Televisioin (Large: over 16 inch)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

500 EA ¥ ¥ 9230

C701AD Refrigerator (Small: under 170 liter)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

250 EA ¥ ¥ 9230

C701AE Refrigerator (Large: over 171 liter)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

100 EA ¥ ¥ 9230

C701AF Washing Machine/ Clothes Dryer

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

100 EA ¥ ¥ 9230

ELINs C700 through C705

ATTACHMENT J-0200000-07

EXHIBIT LINE ITEM NUMBERS

SOLICITATION/CONTRACT #

EXHIBIT C - CLIN 9002

Line Item 0006 Non-Recurring - Second Option Period Provide Prices For Integrated Solid Waste Management (ISWM) Services - Non-Recurring Price - In Accordance With Section C, Spec Item 4

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

C702 Solid Waste Collection Service and Set Up Solid Waste Containers C702AA Set Up and Removal Service of Solid Waste 10 Cubic Meter Dumpster

The Contractor shall perform set up of solid waste one (1) EA 10 CM dumpster to designated locations and removal of the dumpster include once collection solid waste from the container to empty, and segregation service for collected solid waste.

200 UN ¥ ¥ 9230

C702AB Set Up and Removal Service of Solid Waste Segregation type Bin

The Contractor shall perform set up of solid waste one (1) EA Segregation type Bin to designated locations and removal of the bin include once collection solid waste from the container to empty and segregation service for collected solid waste.

100 UN ¥ ¥ 9230

C702AC Set Up and Removal Service of Solid Waste 32/50 Gallon Container

The Contractor shall perform set up of solid waste one (1) EA 32/50 gallon container to designated locations and removal of the container include once collection solid waste from the container to empty, and segregation service for collected solid waste.

1,000 UN ¥ ¥ 9230

C702AD Solid Waste Collection Service from 10 Cubic Meter Dumpster

The Contractor shall perform collection service of solid waste from one

(1) EA 10 cubic meter dumpster to be empty at designated locations and segregation service of collected solid waste.

200 EA ¥ ¥ 9230

C702AE Solid Waste Collection Service from Segregation type Bin or 32/50 Gallon Container

The Contractor shall perform collection service of solid waste from one

(1) EA solid waste Segregation type Bin or 32/50 Gallon Container to be empty at designated locations and segregation service of collected solid waste.

1,000 EA ¥ ¥ 9230

C702AF Solid Waste Collection Service of Contain in Tri- Wall Box

The Contractor shall perform collection solid waste service contain one

(1) EA Tri-wall box at designated locations and segregation service of collected solid waste, the size up to 1.3 cubic meter.

1,500 EA ¥ ¥ 9230

C702AG Solid Waste Collection Service of Expired Food or Beverage (Perishable)

The Contractor shall provide collection services of Expired Food or Beverage (Perishable) may including of organic sludge, oil, alkaline/acid solution and glass/ceramic debris, metal scrap, waste plastic kind, wood (product/transportation package) general and/or industrial wastes, unit weight up to 200 Kg from designated pickup points to loading to waste container or transportation vehicle, horizontal distance up to 12 meter and segregation service of collected solid waste. The Contractor shall segregation of collected waste at Material Recovery Facility (Bldg.

5004), combustible waste dispose to CFAY Yokosuka solid waste incinerator plant (Bldg. 1829) and industrial waste to ensure compliance with all applicable local, prefectural, Japanese Government laws and regulation.

50 UN ¥ ¥ 9230

C702AH Solid Waste Collection Service of Bulky Waste

This work will be ordered when the quantity of unscheduled service from the recurring work portion exceeds 500 tons per year. The Contractor shall perform unschedule collection solid waste service of the exceeded recurring work amount of bulky waste.

10 TN ¥ ¥ 9230

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

C703 Daily Inspection and Report Services C703AA Daily Inspection and Report

Services of Solid Waste Volume in Containers

The Contractor shall accomplish daily inspection and report the percent (%) volume of solid waste in containers, (a) Bin and (b) Dumpster, in all areas, during contractor waste collection schedule. The Contractor shall inspect the approximate solid waste volume (i.e., 25%, 50%, 75% and 100%) of every container for a period of 30 continuous days or one month, and then submit a written report to the Government Requester or

COR.

3 UN ¥ ¥ 9230

C703AB Inspection and Report Services of Damper on the Solid Waste Containers

The Contractor shall perform inspection of the gas compressed damper installed on the covers of all containers under this contract to make sure that gas damper is operational and report services, and then submit a written report to the Government Requester.

2 TM ¥ ¥ 9230

C704 Transport, Collection and Loading Service of Waste.

C704AA Transport the Accumulated

Combustible Waste to the Trash Pit

The Contractor shall transport, load and un-load the accumulated combustible waste from around Building# 1829 to the trash pit. The service include load and unload service of the accumulated combustible waste for transportation.

200 TN ¥ ¥ 9230

C704AB Short Range Transport, Collection and Loading Service of Solid Waste by Loading Heavy Equipment

The Contractor shall provide loading heavy equipment lease with operation for the transport, collection and loading service of solid waste to Goverment owned solid waste container or transportation vehicle from designated pickup points. The Contractor shall perform transport, collection and loading services with loading heavy equipment whenever the Government requests as above items 701 or 702. The loading heavy equipment of standard bucket capacity, up to 0.1 Cubic Meter.

10 DA ¥ ¥ 9230

C704AC Short Range Transport, Collection and Loading Service of Solid Waste by Forklift

The Contractor shall provide forklift lease with operation for the transport, collection and loading service of solid waste to Goverment owned solid waste container or transportation vehicle from designated pickup points. The Contractor shall perform transport, collection and loading services with forklift whenever the Government requests as above items 701 or 702. The forklift of Rated loading weight, up to 2.0 ton.

10 DA ¥ ¥ 9230

C704AD Short Range Transport, Collection and Loading Service of Solid Waste by Man Hour Labor

The Contractor shall provide labor for the transport, collection and loading service of solid waste to Goverment owned solid waste container or transportation vehicle from designated pickup points. The Contractor shall perform transport, collection and loading services by labor whenever the Government requests as above items 701 or 702.

120 HR ¥ ¥ 9230

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

C705 Repair of Solid Waste Storage Container C705AA Replace Gas Damper of 10

Cubic Meter Dumpster The Contractor shall replace gas damper of lid with new one on 10 cubic meter dumpster. The Contractor shall also replace damaged or missing steel brackets of gas damper, including painting of new and affected areas. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

200 EA ¥ ¥

C705AB Replace Door Hinge of 10 Cubic Meter Dumpster

The Contractor shall replace door hinge which consists of three (3) steel plate hinges and one (1) steel pin, with new ones, including painting of new and affected areas. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

20 EA ¥ ¥

C705AC Replace Container Handle and Dead Bolt of 10 Cubic Meter Dumpster

The Contractor shall replace container handle and dead bolt with new ones of 10 cubic meter dumpster. The Contractor shall also replace steel bands and top/bottom steel latches for steel pin, and steel latch for handle, including painting of new and affected area. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

20 EA ¥ ¥

C705AD Replace Container Handle of 10 Cubic Meter Dumpster

The Contractor shall replace container handle with new one. The Contractor shall also replace damaged or missing steel latch for handle, including painting of new and affected area. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

20 EA ¥ ¥

C705AE Replace Gas Damper of 24 Cubic Meter Dumpster

The Contractor shall replace gas damper of Container top with new one of 24 cubic meter dumpster. The Contractor shall also replace damaged or missing steel brackets of gas damper, including painting of new and affected area. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

8 EA ¥ ¥

C705AF Replace Container Top of 24 Cubic Meter Dumpster

The Contractor shall replace container top which consists of vinyl coated canvas fabric sheet and rope fasteners, with new ones of 24 cubic meter dumpster. The size approximately 6610 mm x 2580 mm x 260 mm.

Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

2 EA ¥ ¥

C705AG Small size Patch Repair Service of Torn/Damaged Vinyl Coated Canvas Fabric Sheet of Container Top on 24 Cubic Meter Dumpster.

The Contractor shall cut and remove torn/damaged area of container top, and patch it up with same materials, in accordance with manufacturer’s repair manual of 24 cubic meter Dumpster. The patch repair size, up to 500 mm x 500 mm. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

2 EA ¥ ¥

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

C705AH Medium size Patch Repair Service of Torn/Damaged Vinyl Coated Canvas Fabric Sheet of Container Top on 24 Cubic Meter Dumpster.

The Contractor shall cut and remove torn/damaged area of container top, and patch it up with same materials, in accordance with manufacturer’s repair manual of 24 cubic meter dumpster. The patch repair size, up to 1000 mm x 1000 mm. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

2 EA ¥ ¥

C705AI Replace Bottom Roller of the 10 Cubic Meter Dumpster.

The Contractor shall replace service of bottom roller with new one of 10 cubic meter dumpster. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

10 EA ¥ ¥

C705AJ Replace Bottom Leg of the 10 Cubic Meter Dumpster

The Contractor shall replace bottom leg with new one of 10 cubic meter dumpster, including painting of new and affected area. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

10 EA ¥ ¥

C705AK Replace Bottom Rails and Floor Metal of the 10 Cubic Meter Dumpster

The Contractor shall replace bottom rails and floor metal with new one of 10 cubic meter dumpster, including painting of new and affected area.

Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

2 EA ¥ ¥

C705AL Install Gas Damper of Segregation Type Bin

The Contractor shall install gas damper of lid with new one of segregation type bin. The Contractor shall also paint affected areas.

Install/Repair portions of solid waste containers sketches are shown on J- 1503030-08.

25 EA ¥ ¥

C705AM Replace Gas Damper of Segregation Type Bin

The Contractor shall replace gas damper of lid with new one of segregation type bin. The Contractor shall also replace damaged or missing steel brackets of gas damper, including painting of new and affected areas. Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

100 EA ¥ ¥

C705AN Replace Lid Hinge of 10 Cubic Meter Dumpster

The Contractor shall replace lid hinges with new ones, including painting of new and affected areas of 10 cubic meter dumpster. The quantities of lid hinges are three (3). Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

20 EA ¥ ¥

C705AO Replace Lid Lock of 10 Cubic Meter Dumpster

The Contractor shall replace lid locks with new ones, including painting of new and affected areas of 10 cubic meter dumpster. The quantities of lid locks are two (2). Repair/Replace portions of solid waste containers sketches are shown on J-1503030-08.

20 EA ¥ ¥

HR = Hour EA = Each DA = Day

C = Cubic TN = Ton UN = Unit M = Meter TM = Time

TOTAL NON-RECURRING PRICE LINE ITEM-0006

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Provide Prices For Integrated Solid Waste Management (ISWM) Services - Recurring - In Accordance With Section C, Spec Item 3

ELIN

Description Quantity Unit of Issue

Unit Price Total CAC

Integrated Solid Waste Management Services, Spec Item 3

D001 CNIC 1 LO ¥ ¥ -$

D002 DECA 1 LO ¥ ¥ -$

D003 DLA 1 LO ¥ ¥ -$

D004 DoDEA 1 LO ¥ ¥ -$

D005 HSG 1 LO ¥ ¥ -$

D006 SRF 1 LO ¥ ¥ -$

D007 USNH 1 LO ¥ ¥ -$

TOTAL RECURRING PRICE LINE ITEM-0007 111.1542¥ ¥ -$

LO = Lot

EXHIBIT D - CLIN 9003

Line Item 0007 Recurring - Third Option Period

ELINs D001 through D007

ATTACHMENT J-0200000-07

EXHIBIT LINE ITEM NUMBERS

SOLICITATION/CONTRACT #

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

D700 Combustible General Waste Segregatio, Tranceportation and Disposal for Yokosuka City D700AA Additional Segregation

Work The Contractor shall perform additional segregation work of all combustible waste comply with Yokosuka City Incinerator Plant acceptance standard.

10 WK ¥ ¥ 9230

D700AB Combustible Solid Waste Tranceportation and Disposal Fee at Yokosuka City Incinerator Plant

The Contractor shall load, transport of all comply with Yokosuka city incinerator plant acceptance standard combustible solid waste to Yokosuka City Incinerator Plant for disposal during Not operational service of the CFAY Yokosuka solid waste incinerator plant (Bldg.

1829). This service include Yokosuka City Incinerator Plant disposal fee (150 yen for every 10 kilograms).

12,000 10 Kg ¥ ¥ 9230

D701 Home Appliance Disposal (These following ELINs include transportation cost and disposal fee by manufacture.)

D701AA Air Conditiner The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

100 EA ¥ ¥ 9230

D701AB Televisioin (Small: under 15 inch)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

200 EA ¥ ¥ 9230

D701AC Televisioin (Large: over 16 inch)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

500 EA ¥ ¥ 9230

D701AD Refrigerator (Small: under 170 liter)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

250 EA ¥ ¥ 9230

D701AE Refrigerator (Large: over 171 liter)

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

100 EA ¥ ¥ 9230

D701AF Washing Machine/ Clothes Dryer

The Contractor shall transport and dispose of home appliances segregated in accordance with spec item 3.2, 3.2.2 and attachment J- 1503030-03, 3.2.2 to the designated facility off Base.

100 EA ¥ ¥ 9230

ELINs D700 through D705

ATTACHMENT J-0200000-07

EXHIBIT LINE ITEM NUMBERS

SOLICITATION/CONTRACT #

EXHIBIT D - CLIN 9003

Line Item 0008 Non-Recurring - Third Option Period Provide Prices For Integrated Solid Waste Management (ISWM) Services - Non-Recurring Price - In Accordance With Section C, Spec Item 4

INFORMATION--SEE FAR 2.101 3.104 [WHEN FILLED]

Unit of Issue

Unit Price Extended Price

IMAP

CAC(s)

D702 Solid Waste Collection Service and Set Up Solid Waste Containers D702AA Set Up and Removal Service of Solid Waste 10 Cubic Meter Dumpster

The Contractor shall perform set up of solid waste one (1) EA 10 CM dumpster to designated locations and removal of the dumpster include once collection solid waste from the container to empty, and segregation service for collected solid waste.

200 UN ¥ ¥ 9230

D702AB Set Up and Removal Service of Solid Waste Segregation type Bin

The Contractor shall perform set up of solid waste one (1) EA Segregation type Bin to designated locations and removal of the bin include once collection solid waste from the container to empty and segregation service for collected solid waste.

100 UN ¥ ¥ 9230

D702AC Set Up and Removal Service of Solid Waste 32/50 Gallon Container

The Contractor shall perform set up of solid waste one (1) EA 32/50 gallon container to designated locations and removal of the container include once collection solid waste from the container to empty, and segregation service for collected solid waste.

1,000 UN ¥ ¥ 9230

D702AD Solid Waste Collection Service from 10 Cubic Meter Dumpster

The Contractor shall perform collection service of solid waste from one

(1) EA 10 cubic meter dumpster to be empty at designated locations and segregation service of collected solid waste.

200 EA ¥ ¥ 9230

D702AE…